[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b8075cfa-599d-4648-8e33-68062b1a855f@lunn.ch>
Date: Fri, 15 Aug 2025 19:34:05 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Daniel Golle <daniel@...rotopia.org>
Cc: Xu Liang <lxu@...linear.com>, Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 2/2] net: phy: mxl-86110: add basic support for
MxL86111 PHY
> + /* For fiber forced mode, power down/up to re-aneg */
> + if (modes != LINK_INBAND_DISABLE) {
> + __phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN);
> + usleep_range(1000, 1050);
> + __phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0);
> + }
Is a full power down required? To restart autoneg all you normally
need to do it set BMCR_ANRESTART. See genphy_restart_aneg().
> @@ -648,8 +928,24 @@ static struct phy_driver mxl_phy_drvs[] = {
> .set_wol = mxl86110_set_wol,
> .led_brightness_set = mxl86110_led_brightness_set,
> .led_hw_is_supported = mxl86110_led_hw_is_supported,
> - .led_hw_control_get = mxl86110_led_hw_control_get,
> - .led_hw_control_set = mxl86110_led_hw_control_set,
> + .led_hw_control_get = mxl86110_led_hw_control_get,
> + .led_hw_control_set = mxl86110_led_hw_control_set,
That should really be in a different patch.
Andrew
Powered by blists - more mailing lists