linux-kernel - [PATCH] docs: iio: bno055: Correct wording in driver documentation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <20250815070001.55185-1-erick.setubal@gmx.de>
Date: Fri, 15 Aug 2025 09:00:01 +0200
From: Erick Setubal Bacurau <erick.setubal@....de>
To: jic23@...nel.org,
	dlechner@...libre.com,
	nuno.sa@...log.com,
	andy@...nel.org,
	corbet@....net,
	linux-iio@...r.kernel.org,
	linux-doc@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: skhan@...uxfoundation.org,
	Erick Setubal Bacurau <erick.setubal@....de>
Subject: [PATCH] docs: iio: bno055: Correct wording in driver documentation

Fix typos and improve wording in the bno055 driver documentation.

Signed-off-by: Erick Setubal Bacurau <erick.setubal@....de>
---
 Documentation/iio/bno055.rst | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/iio/bno055.rst b/Documentation/iio/bno055.rst
index f1111ff3fe2e..c6042586b2ae 100644
--- a/Documentation/iio/bno055.rst
+++ b/Documentation/iio/bno055.rst
@@ -9,11 +9,11 @@ BNO055 driver
 
 This driver supports Bosch BNO055 IMUs (on both serial and I2C busses).
 
-Accelerometer, magnetometer and gyroscope measures are always provided.
+Accelerometer, magnetometer and gyroscope measurements are always available.
 When "fusion_enable" sysfs attribute is set to 1, orientation (both Euler
 angles and quaternion), linear velocity and gravity vector are also
 provided, but some sensor settings (e.g. low pass filtering and range)
-became locked (the IMU firmware controls them).
+become locked (the IMU firmware controls them).
 
 This driver supports also IIO buffers.
 
@@ -24,14 +24,14 @@ The IMU continuously performs an autocalibration procedure if (and only if)
 operating in fusion mode. The magnetometer autocalibration can however be
 disabled by writing 0 in the sysfs in_magn_calibration_fast_enable attribute.
 
-The driver provides access to autocalibration flags (i.e. you can known if
-the IMU has successfully autocalibrated) and to the calibration data blob.
+The driver provides access to autocalibration flags (i.e. you can determine
+if the IMU has successfully autocalibrated) and to the calibration data blob.
 
 The user can save this blob in a firmware file (i.e. in /lib/firmware) that
 the driver looks for at probe time. If found, then the IMU is initialized
 with this calibration data. This saves the user from performing the
-calibration procedure every time (which consist of moving the IMU in
-various way).
+calibration procedure every time (which consists of moving the IMU in
+various ways).
 
 The driver looks for calibration data file using two different names: first
 a file whose name is suffixed with the IMU unique ID (exposed in sysfs as
-- 
2.43.0