[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250815102317.910014-2-shengjiu.wang@nxp.com>
Date: Fri, 15 Aug 2025 18:23:15 +0800
From: Shengjiu Wang <shengjiu.wang@....com>
To: robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
shawnguo@...nel.org,
s.hauer@...gutronix.de,
kernel@...gutronix.de,
festevam@...il.com,
devicetree@...r.kernel.org,
imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
shengjiu.wang@...il.com
Subject: [PATCH v3 1/3] arm64: dts: imx8mm-evk: support more sample rates for wm8524 card
The wm8524 codec is connected to the SAI interface. There are two audio
plls on i.MX8MM, one pll can be the clock source of 44kHz series rates,
another pll can be clock source of 48kHz series rates.
Previously it only supported 48kHz series rates, with this change the
supported rates will include 44kHz series rates, from 8kHz to 192kHz.
As commit 17cc308b1833 ("ASoC: wm8524: enable constraints when sysclk is
configured.") make wm8524 release the constraint when codec's sysclk is
not configured, so configure the cpu dai's sysclk to support more rates
with the 'clocks' property removed.
Add mclk-fs property for the sysclk ratio, which is required by
calculating the sysclk, 256 is a common ratio for audio.
'system-clock-direction-out' is a required property after
commit 5725bce709db ("ASoC: simple-card-utils: Unify clock direction by
clk_direction") to specify the clock direction.
Signed-off-by: Shengjiu Wang <shengjiu.wang@....com>
Reviewed-by: Frank Li <Frank.Li@....com>
---
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 622caaa78eaf..ff7ca2075230 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -147,6 +147,7 @@ sound-wm8524 {
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&cpudai>;
simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets =
"Line", "Left Line Out Jack",
"Line", "Right Line Out Jack";
@@ -158,11 +159,11 @@ cpudai: simple-audio-card,cpu {
sound-dai = <&sai3>;
dai-tdm-slot-num = <2>;
dai-tdm-slot-width = <32>;
+ system-clock-direction-out;
};
simple-audio-card,codec {
sound-dai = <&wm8524>;
- clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
};
};
@@ -570,9 +571,17 @@ &sai2 {
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
- assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
- assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
- assigned-clock-rates = <24576000>;
+ assigned-clocks = <&clk IMX8MM_AUDIO_PLL1>,
+ <&clk IMX8MM_AUDIO_PLL2>,
+ <&clk IMX8MM_CLK_SAI3>;
+ assigned-clock-parents = <0>, <0>, <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <393216000>, <361267200>, <24576000>;
+ fsl,sai-mclk-direction-output;
+ clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+ <&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+ <&clk IMX8MM_AUDIO_PLL2_OUT>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
status = "okay";
};
--
2.34.1
Powered by blists - more mailing lists