[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250817143024.165471-3-biju.das.jz@bp.renesas.com>
Date: Sun, 17 Aug 2025 15:30:20 +0100
From: Biju <biju.das.au@...il.com>
To: Geert Uytterhoeven <geert+renesas@...der.be>,
Linus Walleij <linus.walleij@...aro.org>
Cc: Biju Das <biju.das.jz@...renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
linux-renesas-soc@...r.kernel.org,
linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org,
Biju Das <biju.das.au@...il.com>
Subject: [PATCH v2 2/2] pinctrl: renesas: rzg2l: Drop the unnecessary pin configurations
From: Biju Das <biju.das.jz@...renesas.com>
There is no need to reconfigure the pin if the pin's configuration values
are same as the reset values. E.g.: PS0 pin configuration for NMI function
is PMC = 1 and PFC = 0 and is same as that of reset values. Currently the
code is first setting it to GPIO HI-Z state and then again reconfiguring
to NMI function leading to spurious IRQ. Drop the unnecessary pin
configurations from the driver.
Signed-off-by: Biju Das <biju.das.jz@...renesas.com>
---
v1->v2:
* Updated commit header and description.
* Added check in rzg2l_pinctrl_set_pfc_mode() to avoid unnecessary
configuration
* Updated rzg2l_pinctrl_pm_setup_pfc() to make changes minimal.
---
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 2b5d16594bb7..8422a5429ca3 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -539,7 +539,11 @@ static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
u8 pin, u8 off, u8 func)
{
unsigned long flags;
- u32 reg;
+ u32 reg, pfc;
+
+ pfc = readl(pctrl->base + PFC(off));
+ if (((pfc >> (pin * 4)) & PFC_MASK) == func)
+ return;
spin_lock_irqsave(&pctrl->lock, flags);
@@ -555,9 +559,8 @@ static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
writeb(reg & ~BIT(pin), pctrl->base + PMC(off));
/* Select Pin function mode with PFC register */
- reg = readl(pctrl->base + PFC(off));
- reg &= ~(PFC_MASK << (pin * 4));
- writel(reg | (func << (pin * 4)), pctrl->base + PFC(off));
+ pfc &= ~(PFC_MASK << (pin * 4));
+ writel(pfc | (func << (pin * 4)), pctrl->base + PFC(off));
/* Switch to Peripheral pin function with PMC register */
reg = readb(pctrl->base + PMC(off));
@@ -3103,11 +3106,18 @@ static void rzg2l_pinctrl_pm_setup_pfc(struct rzg2l_pinctrl *pctrl)
pm = readw(pctrl->base + PM(off));
for_each_set_bit(pin, &pinmap, max_pin) {
struct rzg2l_pinctrl_reg_cache *cache = pctrl->cache;
+ u32 pfc_val, pfc_mask;
/* Nothing to do if PFC was not configured before. */
if (!(cache->pmc[port] & BIT(pin)))
continue;
+ pfc_val = readl(pctrl->base + PFC(off));
+ pfc_mask = PFC_MASK << (pin * 4);
+ /* Nothing to do if reset value of the pin is same as cached value */
+ if ((cache->pfc[port] & pfc_mask) == (pfc_val & pfc_mask))
+ continue;
+
/* Set pin to 'Non-use (Hi-Z input protection)' */
pm &= ~(PM_MASK << (pin * 2));
writew(pm, pctrl->base + PM(off));
@@ -3117,8 +3127,8 @@ static void rzg2l_pinctrl_pm_setup_pfc(struct rzg2l_pinctrl *pctrl)
writeb(pmc, pctrl->base + PMC(off));
/* Select Pin function mode. */
- pfc &= ~(PFC_MASK << (pin * 4));
- pfc |= (cache->pfc[port] & (PFC_MASK << (pin * 4)));
+ pfc &= ~pfc_mask;
+ pfc |= (cache->pfc[port] & pfc_mask);
writel(pfc, pctrl->base + PFC(off));
/* Switch to Peripheral pin function. */
--
2.43.0
Powered by blists - more mailing lists