| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b8ed887a-1ffd-4ed4-98b0-6e71f8213f6b@ti.com>
Date: Tue, 19 Aug 2025 09:44:48 -0500
From: Andrew Davis <afd@...com>
To: Nishanth Menon <nm@...com>, Conor Dooley <conor+dt@...nel.org>,
Krzysztof
Kozlowski <krzk+dt@...nel.org>,
Rob Herring <robh@...nel.org>, David Airlie
<airlied@...il.com>,
Maxime Ripard <mripard@...nel.org>,
Laurent Pinchart
<Laurent.pinchart@...asonboard.com>,
Neil Armstrong
<neil.armstrong@...aro.org>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<dri-devel@...ts.freedesktop.org>,
Robert Nelson <robertcnelson@...il.com>,
Jason Kridner <jkridner@...gleboard.org>,
<tomi.valkeinen@...asonboard.com>, <devarsht@...com>,
<dmitry.baryshkov@....qualcomm.com>
Subject: Re: [PATCH V4 4/5] drm/bridge: it66121: Use vid/pid to detect the
type of chip
On 8/19/25 8:08 AM, Nishanth Menon wrote:
> The driver knows exactly which version of the chip is present since
> the vid/pid is used to enforce a compatibility. Given that some
> devices like IT66121 has potentially been replaced with IT66122 mid
> production for many platforms, it makes no sense to use the vid/pid
> as an enforcement for compatibility. Instead, detect the ID of the
> actual chip in use by matching the corresponding vid/pid and drop the
> compatible specific lookup table.
>
> Signed-off-by: Nishanth Menon <nm@...com>
> ---
> Changes in V4:
> * Dropped the formatting change
> * Dropped the data lookup from match.
> * Have not picked Andrew's review since the patch was modified
>
> V3: https://lore.kernel.org/all/20250815034105.1276548-4-nm@ti.com/
> V2: https://lore.kernel.org/all/20250813204106.580141-3-nm@ti.com/
>
> drivers/gpu/drm/bridge/ite-it66121.c | 56 ++++++++++++++--------------
> 1 file changed, 28 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/ite-it66121.c b/drivers/gpu/drm/bridge/ite-it66121.c
> index cd74f3966560..a1b0f8a8f3e8 100644
> --- a/drivers/gpu/drm/bridge/ite-it66121.c
> +++ b/drivers/gpu/drm/bridge/ite-it66121.c
> @@ -312,7 +312,7 @@ struct it66121_ctx {
> u8 swl;
> bool auto_cts;
> } audio;
> - const struct it66121_chip_info *info;
> + enum chip_id id;
> };
>
> static const struct regmap_range_cfg it66121_regmap_banks[] = {
> @@ -402,7 +402,7 @@ static int it66121_configure_afe(struct it66121_ctx *ctx,
> if (ret)
> return ret;
>
> - if (ctx->info->id == ID_IT66121) {
> + if (ctx->id == ID_IT66121) {
> ret = regmap_write_bits(ctx->regmap, IT66121_AFE_IP_REG,
> IT66121_AFE_IP_EC1, 0);
> if (ret)
> @@ -428,7 +428,7 @@ static int it66121_configure_afe(struct it66121_ctx *ctx,
> if (ret)
> return ret;
>
> - if (ctx->info->id == ID_IT66121) {
> + if (ctx->id == ID_IT66121) {
> ret = regmap_write_bits(ctx->regmap, IT66121_AFE_IP_REG,
> IT66121_AFE_IP_EC1,
> IT66121_AFE_IP_EC1);
> @@ -449,7 +449,7 @@ static int it66121_configure_afe(struct it66121_ctx *ctx,
> if (ret)
> return ret;
>
> - if (ctx->info->id == ID_IT6610) {
> + if (ctx->id == ID_IT6610) {
> ret = regmap_write_bits(ctx->regmap, IT66121_AFE_XP_REG,
> IT6610_AFE_XP_BYPASS,
> IT6610_AFE_XP_BYPASS);
> @@ -599,7 +599,7 @@ static int it66121_bridge_attach(struct drm_bridge *bridge,
> if (ret)
> return ret;
>
> - if (ctx->info->id == ID_IT66121) {
> + if (ctx->id == ID_IT66121) {
> ret = regmap_write_bits(ctx->regmap, IT66121_CLK_BANK_REG,
> IT66121_CLK_BANK_PWROFF_RCLK, 0);
> if (ret)
> @@ -748,7 +748,7 @@ static int it66121_bridge_check(struct drm_bridge *bridge,
> {
> struct it66121_ctx *ctx = container_of(bridge, struct it66121_ctx, bridge);
>
> - if (ctx->info->id == ID_IT6610) {
> + if (ctx->id == ID_IT6610) {
> /* The IT6610 only supports these settings */
> bridge_state->input_bus_cfg.flags |= DRM_BUS_FLAG_DE_HIGH |
> DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
> @@ -802,7 +802,7 @@ void it66121_bridge_mode_set(struct drm_bridge *bridge,
> if (regmap_write(ctx->regmap, IT66121_HDMI_MODE_REG, IT66121_HDMI_MODE_HDMI))
> goto unlock;
>
> - if (ctx->info->id == ID_IT66121 &&
> + if (ctx->id == ID_IT66121 &&
> regmap_write_bits(ctx->regmap, IT66121_CLK_BANK_REG,
> IT66121_CLK_BANK_PWROFF_TXCLK,
> IT66121_CLK_BANK_PWROFF_TXCLK)) {
> @@ -815,7 +815,7 @@ void it66121_bridge_mode_set(struct drm_bridge *bridge,
> if (it66121_configure_afe(ctx, adjusted_mode))
> goto unlock;
>
> - if (ctx->info->id == ID_IT66121 &&
> + if (ctx->id == ID_IT66121 &&
> regmap_write_bits(ctx->regmap, IT66121_CLK_BANK_REG,
> IT66121_CLK_BANK_PWROFF_TXCLK, 0)) {
> goto unlock;
> @@ -1498,6 +1498,12 @@ static const char * const it66121_supplies[] = {
> "vcn33", "vcn18", "vrf12"
> };
>
> +static const struct it66121_chip_info it66xx_chip_info[] = {
> + {.id = ID_IT6610, .vid = 0xca00, .pid = 0x0611 },
> + {.id = ID_IT66121, .vid = 0x4954, .pid = 0x0612 },
> + { }
> +};
> +
> static int it66121_probe(struct i2c_client *client)
> {
> u32 revision_id, vendor_ids[2] = { 0 }, device_ids[2] = { 0 };
> @@ -1505,6 +1511,7 @@ static int it66121_probe(struct i2c_client *client)
> int ret;
> struct it66121_ctx *ctx;
> struct device *dev = &client->dev;
> + const struct it66121_chip_info *chip_info;
>
> if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> dev_err(dev, "I2C check functionality failed.\n");
> @@ -1522,7 +1529,6 @@ static int it66121_probe(struct i2c_client *client)
>
> ctx->dev = dev;
> ctx->client = client;
> - ctx->info = i2c_get_match_data(client);
>
> of_property_read_u32(ep, "bus-width", &ctx->bus_width);
> of_node_put(ep);
> @@ -1568,11 +1574,17 @@ static int it66121_probe(struct i2c_client *client)
> revision_id = FIELD_GET(IT66121_REVISION_MASK, device_ids[1]);
> device_ids[1] &= IT66121_DEVICE_ID1_MASK;
>
> - if ((vendor_ids[1] << 8 | vendor_ids[0]) != ctx->info->vid ||
> - (device_ids[1] << 8 | device_ids[0]) != ctx->info->pid) {
> - return -ENODEV;
> + for (chip_info = it66xx_chip_info; chip_info->vid; chip_info++) {
Relying on a null entry bugs me, here you could just use
the length of the table and remove the null entry:
for (i = 0; i < ARRAY_SIZE(it66xx_chip_info); i++) {
chip_info = &it66xx_chip_info[i];
...
Either way,
Reviewed-by: Andrew Davis <afd@...com>
> + if ((vendor_ids[1] << 8 | vendor_ids[0]) == chip_info->vid &&
> + (device_ids[1] << 8 | device_ids[0]) == chip_info->pid) {
> + ctx->id = chip_info->id;
> + break;
> + }
> }
>
> + if (!chip_info->vid)
> + return -ENODEV;
> +
> ctx->bridge.of_node = dev->of_node;
> ctx->bridge.type = DRM_MODE_CONNECTOR_HDMIA;
> ctx->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID;
> @@ -1606,28 +1618,16 @@ static void it66121_remove(struct i2c_client *client)
> mutex_destroy(&ctx->lock);
> }
>
> -static const struct it66121_chip_info it66121_chip_info = {
> - .id = ID_IT66121,
> - .vid = 0x4954,
> - .pid = 0x0612,
> -};
> -
> -static const struct it66121_chip_info it6610_chip_info = {
> - .id = ID_IT6610,
> - .vid = 0xca00,
> - .pid = 0x0611,
> -};
> -
> static const struct of_device_id it66121_dt_match[] = {
> - { .compatible = "ite,it6610", &it6610_chip_info },
> - { .compatible = "ite,it66121", &it66121_chip_info },
> + { .compatible = "ite,it6610" },
> + { .compatible = "ite,it66121" },
> { }
> };
> MODULE_DEVICE_TABLE(of, it66121_dt_match);
>
> static const struct i2c_device_id it66121_id[] = {
> - { "it6610", (kernel_ulong_t)&it6610_chip_info },
> - { "it66121", (kernel_ulong_t)&it66121_chip_info },
> + { .name = "it6610" },
> + { .name = "it66121" },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, it66121_id);
Powered by blists - more mailing lists