| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250819165447.4149674-11-mukesh.ojha@oss.qualcomm.com>
Date: Tue, 19 Aug 2025 22:24:45 +0530
From: Mukesh Ojha <mukesh.ojha@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Vikash Garodia <quic_vgarodia@...cinc.com>,
Dikshita Agarwal <quic_dikshita@...cinc.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Mathieu Poirier <mathieu.poirier@...aro.org>
Cc: Abhinav Kumar <abhinav.kumar@...ux.dev>,
"Bryan O'Donoghue" <bryan.odonoghue@...aro.org>,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-media@...r.kernel.org, linux-remoteproc@...r.kernel.org,
Mukesh Ojha <mukesh.ojha@....qualcomm.com>
Subject: [PATCH v2 10/11] remoteproc: qcom: pas: Enable Secure PAS support with IOMMU managed by Linux
Most Qualcomm platforms feature a proprietary hypervisor (such as Gunyah
or QHEE), which typically handles IOMMU configuration. This includes
mapping memory regions and device memory resources for remote processors
by intercepting qcom_scm_pas_auth_and_reset() calls. These mappings are
later removed during teardown. Additionally, SHM bridge setup is
required to enable memory protection for both remoteproc metadata and
its memory regions.
When the aforementioned hypervisor is absent, the operating system must
perform these configurations instead.
When Linux runs as the hypervisor (at EL2) on a SoC, it will have its
own device tree overlay file that specifies the firmware stream ID now
managed by Linux for a particular remote processor. If the iommus
property is specified in the remoteproc device tree node, it indicates
that IOMMU configuration must be handled by Linux. In this case, the
has_iommu flag is set for the remote processor, which ensures that the
resource table, carveouts, and SHM bridge are properly configured before
memory is passed to TrustZone for authentication. Otherwise, the
has_iommu flag remains unset, which is the default behavior.
Enables Secure PAS support for remote processors when IOMMU configuration
is managed by Linux.
Signed-off-by: Mukesh Ojha <mukesh.ojha@....qualcomm.com>
---
drivers/remoteproc/qcom_q6v5_pas.c | 63 +++++++++++++++++++++++++++---
1 file changed, 57 insertions(+), 6 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 1e0f09bf1ef2..180528bcd57c 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -11,6 +11,7 @@
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/interrupt.h>
+#include <linux/iommu.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -250,6 +251,22 @@ static int qcom_pas_load(struct rproc *rproc, const struct firmware *fw)
return ret;
}
+static void qcom_pas_unmap_carveout(struct rproc *rproc, phys_addr_t mem_phys, size_t size)
+{
+ if (rproc->has_iommu)
+ iommu_unmap(rproc->domain, mem_phys, size);
+}
+
+static int qcom_pas_map_carveout(struct rproc *rproc, phys_addr_t mem_phys, size_t size)
+{
+ int ret = 0;
+
+ if (rproc->has_iommu)
+ ret = iommu_map(rproc->domain, mem_phys, mem_phys, size,
+ IOMMU_READ | IOMMU_WRITE, GFP_KERNEL);
+ return ret;
+}
+
static int qcom_pas_start(struct rproc *rproc)
{
struct qcom_pas *pas = rproc->priv;
@@ -284,11 +301,15 @@ static int qcom_pas_start(struct rproc *rproc)
}
if (pas->dtb_pas_id) {
- ret = qcom_scm_pas_auth_and_reset(pas->dtb_pas_id);
+ ret = qcom_pas_map_carveout(rproc, pas->dtb_mem_phys, pas->dtb_mem_size);
+ if (ret)
+ goto disable_px_supply;
+
+ ret = qcom_scm_pas_prepare_and_auth_reset(pas->dtb_pas_ctx);
if (ret) {
dev_err(pas->dev,
"failed to authenticate dtb image and release reset\n");
- goto disable_px_supply;
+ goto unmap_dtb_carveout;
}
}
@@ -299,18 +320,22 @@ static int qcom_pas_start(struct rproc *rproc)
qcom_pil_info_store(pas->info_name, pas->mem_phys, pas->mem_size);
- ret = qcom_scm_pas_auth_and_reset(pas->pas_id);
+ ret = qcom_pas_map_carveout(rproc, pas->mem_phys, pas->mem_size);
+ if (ret)
+ goto release_pas_metadata;
+
+ ret = qcom_scm_pas_prepare_and_auth_reset(pas->pas_ctx);
if (ret) {
dev_err(pas->dev,
"failed to authenticate image and release reset\n");
- goto release_pas_metadata;
+ goto unmap_carveout;
}
ret = qcom_q6v5_wait_for_start(&pas->q6v5, msecs_to_jiffies(5000));
if (ret == -ETIMEDOUT) {
dev_err(pas->dev, "start timed out\n");
qcom_scm_pas_shutdown(pas->pas_id);
- goto release_pas_metadata;
+ goto unmap_carveout;
}
qcom_scm_pas_metadata_release(pas->pas_ctx);
@@ -322,10 +347,16 @@ static int qcom_pas_start(struct rproc *rproc)
return 0;
+unmap_carveout:
+ qcom_pas_unmap_carveout(rproc, pas->mem_phys, pas->mem_size);
release_pas_metadata:
qcom_scm_pas_metadata_release(pas->pas_ctx);
if (pas->dtb_pas_id)
qcom_scm_pas_metadata_release(pas->dtb_pas_ctx);
+
+unmap_dtb_carveout:
+ if (pas->dtb_pas_id)
+ qcom_pas_unmap_carveout(rproc, pas->dtb_mem_phys, pas->dtb_mem_size);
disable_px_supply:
if (pas->px_supply)
regulator_disable(pas->px_supply);
@@ -381,8 +412,12 @@ static int qcom_pas_stop(struct rproc *rproc)
ret = qcom_scm_pas_shutdown(pas->dtb_pas_id);
if (ret)
dev_err(pas->dev, "failed to shutdown dtb: %d\n", ret);
+
+ qcom_pas_unmap_carveout(rproc, pas->dtb_mem_phys, pas->dtb_mem_size);
}
+ qcom_pas_unmap_carveout(rproc, pas->mem_phys, pas->mem_size);
+
handover = qcom_q6v5_unprepare(&pas->q6v5);
if (handover)
qcom_pas_handover(&pas->q6v5);
@@ -424,7 +459,8 @@ static int qcom_pas_parse_firmware(struct rproc *rproc, const struct firmware *f
if (!rproc->has_iommu)
return ret;
- ret = qcom_scm_pas_get_rsc_table(pas->pas_id, NULL, 0, &output_rt, &output_rt_size);
+ ret = qcom_scm_pas_get_rsc_table(pas->pas_ctx, NULL, 0,
+ &output_rt, &output_rt_size);
if (ret) {
dev_err(pas->dev, "error %d getting resource_table\n", ret);
return ret;
@@ -726,6 +762,20 @@ static int qcom_pas_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ if (of_property_present(pdev->dev.of_node, "iommus")) {
+ struct of_phandle_args args;
+
+ ret = of_parse_phandle_with_args(pdev->dev.of_node, "iommus",
+ "#iommu-cells", 0, &args);
+ if (ret < 0)
+ return ret;
+
+ rproc->has_iommu = true;
+ of_node_put(args.np);
+ } else {
+ rproc->has_iommu = false;
+ }
+
rproc->auto_boot = desc->auto_boot;
rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
@@ -800,6 +850,7 @@ static int qcom_pas_probe(struct platform_device *pdev)
if (!pas->dtb_pas_ctx)
goto remove_ssr_sysmon;
+ pas->pas_ctx->has_iommu = pas->dtb_pas_ctx->has_iommu = rproc->has_iommu;
ret = rproc_add(rproc);
if (ret)
goto remove_ssr_sysmon;
--
2.50.1
Powered by blists - more mailing lists