linux-kernel - [PATCH] media: venus: firmware: Use correct reset sequence for IRIS2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250820-venus-iris2-no-tz-v1-1-9ebcc343195a@linaro.org>
Date: Wed, 20 Aug 2025 17:16:39 +0200
From: Stephan Gerhold <stephan.gerhold@...aro.org>
To: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Cc: Vikash Garodia <quic_vgarodia@...cinc.com>, 
 Dikshita Agarwal <quic_dikshita@...cinc.com>, 
 Mauro Carvalho Chehab <mchehab@...nel.org>, 
 Konrad Dybcio <konradybcio@...nel.org>, Hans Verkuil <hverkuil@...nel.org>, 
 linux-media@...r.kernel.org, linux-arm-msm@...r.kernel.org, 
 linux-kernel@...r.kernel.org
Subject: [PATCH] media: venus: firmware: Use correct reset sequence for
 IRIS2

When starting venus with the "no_tz" code path, IRIS2 needs the same
boot/reset sequence as IRIS2_1. This is because most of the registers were
moved to the "wrapper_tz_base", which is already defined for both IRIS2 and
IRIS2_1 inside core.c. Add IRIS2 to the checks inside firmware.c as well to
make sure that it uses the correct reset sequence.

Both IRIS and IRIS2_1 are HFI v6 variants, so the correct sequence was used
before commit c38610f8981e ("media: venus: firmware: Sanitize
per-VPU-version").

Fixes: c38610f8981e ("media: venus: firmware: Sanitize per-VPU-version")
Signed-off-by: Stephan Gerhold <stephan.gerhold@...aro.org>
---
 drivers/media/platform/qcom/venus/firmware.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
index 66a18830e66dac2acbe11751a8c250876e20d795..4e2636b0536693a86dc51503d01dc2bca40b532a 100644
--- a/drivers/media/platform/qcom/venus/firmware.c
+++ b/drivers/media/platform/qcom/venus/firmware.c
@@ -30,7 +30,7 @@ static void venus_reset_cpu(struct venus_core *core)
 	u32 fw_size = core->fw.mapped_mem_size;
 	void __iomem *wrapper_base;
 
-	if (IS_IRIS2_1(core))
+	if (IS_IRIS2(core) || IS_IRIS2_1(core))
 		wrapper_base = core->wrapper_tz_base;
 	else
 		wrapper_base = core->wrapper_base;
@@ -42,7 +42,7 @@ static void venus_reset_cpu(struct venus_core *core)
 	writel(fw_size, wrapper_base + WRAPPER_NONPIX_START_ADDR);
 	writel(fw_size, wrapper_base + WRAPPER_NONPIX_END_ADDR);
 
-	if (IS_IRIS2_1(core)) {
+	if (IS_IRIS2(core) || IS_IRIS2_1(core)) {
 		/* Bring XTSS out of reset */
 		writel(0, wrapper_base + WRAPPER_TZ_XTSS_SW_RESET);
 	} else {
@@ -68,7 +68,7 @@ int venus_set_hw_state(struct venus_core *core, bool resume)
 	if (resume) {
 		venus_reset_cpu(core);
 	} else {
-		if (IS_IRIS2_1(core))
+		if (IS_IRIS2(core) || IS_IRIS2_1(core))
 			writel(WRAPPER_XTSS_SW_RESET_BIT,
 			       core->wrapper_tz_base + WRAPPER_TZ_XTSS_SW_RESET);
 		else
@@ -181,7 +181,7 @@ static int venus_shutdown_no_tz(struct venus_core *core)
 	void __iomem *wrapper_base = core->wrapper_base;
 	void __iomem *wrapper_tz_base = core->wrapper_tz_base;
 
-	if (IS_IRIS2_1(core)) {
+	if (IS_IRIS2(core) || IS_IRIS2_1(core)) {
 		/* Assert the reset to XTSS */
 		reg = readl(wrapper_tz_base + WRAPPER_TZ_XTSS_SW_RESET);
 		reg |= WRAPPER_XTSS_SW_RESET_BIT;

---
base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585
change-id: 20250815-venus-iris2-no-tz-f9b52f33c4d0

Best regards,
-- 
Stephan Gerhold <stephan.gerhold@...aro.org>