| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250820171812.402519-5-biju.das.jz@bp.renesas.com>
Date: Wed, 20 Aug 2025 18:17:51 +0100
From: Biju <biju.das.au@...il.com>
To: Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>
Cc: Biju Das <biju.das.jz@...renesas.com>,
linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org,
linux-renesas-soc@...r.kernel.org,
Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@...renesas.com>,
Biju Das <biju.das.au@...il.com>
Subject: [PATCH 04/11] phy: renesas: Add Renesas RZ/G3E USB3.0 PHY driver
From: Biju Das <biju.das.jz@...renesas.com>
Add Renesas RZ/G3E USB3.0 PHY driver. This module is connected
between USB3 Host and PHY module. The main functions of this
module are:
1) Reset control
2) Control of PHY input pins
3) Monitoring of PHY output pins
Signed-off-by: Biju Das <biju.das.jz@...renesas.com>
---
drivers/phy/renesas/Kconfig | 7 +
drivers/phy/renesas/Makefile | 1 +
drivers/phy/renesas/phy-rzg3e-usb3.c | 249 +++++++++++++++++++++++++++
3 files changed, 257 insertions(+)
create mode 100644 drivers/phy/renesas/phy-rzg3e-usb3.c
diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig
index e342eef0640b..16211072098e 100644
--- a/drivers/phy/renesas/Kconfig
+++ b/drivers/phy/renesas/Kconfig
@@ -40,3 +40,10 @@ config PHY_RCAR_GEN3_USB3
select GENERIC_PHY
help
Support for USB 3.0 PHY found on Renesas R-Car generation 3 SoCs.
+
+config PHY_RZ_G3E_USB3
+ tristate "Renesas RZ/G3E USB 3.0 PHY driver"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select GENERIC_PHY
+ help
+ Support for USB 3.0 PHY found on Renesas RZ/G3E SoCs.
diff --git a/drivers/phy/renesas/Makefile b/drivers/phy/renesas/Makefile
index 8896d1919faa..0e98083f2f0c 100644
--- a/drivers/phy/renesas/Makefile
+++ b/drivers/phy/renesas/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
obj-$(CONFIG_PHY_RCAR_GEN3_PCIE) += phy-rcar-gen3-pcie.o
obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
obj-$(CONFIG_PHY_RCAR_GEN3_USB3) += phy-rcar-gen3-usb3.o
+obj-$(CONFIG_PHY_RZ_G3E_USB3) += phy-rzg3e-usb3.o
diff --git a/drivers/phy/renesas/phy-rzg3e-usb3.c b/drivers/phy/renesas/phy-rzg3e-usb3.c
new file mode 100644
index 000000000000..3ea521ed8f48
--- /dev/null
+++ b/drivers/phy/renesas/phy-rzg3e-usb3.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G3E USB3.0 PHY driver
+ *
+ * Copyright (C) 2025 Renesas Electronics Corporation
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#define USB3_TEST_RESET 0x0000
+#define USB3_TEST_UTMICTRL2 0x0b04
+#define USB3_TEST_PRMCTRL5_R 0x0c10
+#define USB3_TEST_PRMCTRL6_R 0x0c14
+
+#define USB3_TEST_RSTCTRL 0x1000
+#define USB3_TEST_CLKCTRL 0x1004
+#define USB3_TEST_RAMCTRL 0x100c
+#define USB3_TEST_CREGCTRL 0x1010
+#define USB3_TEST_LANECONFIG0 0x1030
+
+#define USB3_TEST_RESET_PORTRESET0_CTRL BIT(9)
+#define USB3_TEST_RESET_SIDDQ BIT(3)
+#define USB3_TEST_RESET_PHY_RESET BIT(2)
+#define USB3_TEST_RESET_PORTRESET0 BIT(1)
+
+#define USB3_TEST_UTMICTRL2_CTRL_MASK GENMASK(9, 8)
+#define USB3_TEST_UTMICTRL2_MODE_MASK GENMASK(1, 0)
+
+#define USB3_TEST_PRMCTRL5_R_TXPREEMPAMPTUNE0_MASK GENMASK(2, 1)
+
+#define USB3_TEST_PRMCTRL6_R_OTGTUNE0_MASK GENMASK(2, 0)
+
+#define USB3_TEST_RAMCTRL_SRAM_INIT_DONE BIT(2)
+
+struct rz_usb3 {
+ void __iomem *base;
+ struct reset_control *rstc;
+ bool skip_reinit;
+};
+
+static void rzg3e_phy_usb2test_phy_init(void __iomem *base)
+{
+ u32 val;
+
+ val = readl(base + USB3_TEST_UTMICTRL2);
+ val |= USB3_TEST_UTMICTRL2_CTRL_MASK | USB3_TEST_UTMICTRL2_MODE_MASK;
+ writel(val, base + USB3_TEST_UTMICTRL2);
+
+ val = readl(base + USB3_TEST_PRMCTRL5_R);
+ val &= ~USB3_TEST_PRMCTRL5_R_TXPREEMPAMPTUNE0_MASK;
+ val |= FIELD_PREP(USB3_TEST_PRMCTRL5_R_TXPREEMPAMPTUNE0_MASK, 2);
+ writel(val, base + USB3_TEST_PRMCTRL5_R);
+
+ val = readl(base + USB3_TEST_PRMCTRL6_R);
+ val &= ~USB3_TEST_PRMCTRL6_R_OTGTUNE0_MASK;
+ val |= FIELD_PREP(USB3_TEST_PRMCTRL6_R_OTGTUNE0_MASK, 7);
+ writel(val, base + USB3_TEST_PRMCTRL6_R);
+
+ val = readl(base + USB3_TEST_RESET);
+ val &= ~USB3_TEST_RESET_SIDDQ;
+ val |= USB3_TEST_RESET_PORTRESET0_CTRL | USB3_TEST_RESET_PHY_RESET |
+ USB3_TEST_RESET_PORTRESET0;
+ writel(val, base + USB3_TEST_RESET);
+ fsleep(10);
+
+ val &= ~(USB3_TEST_RESET_PHY_RESET | USB3_TEST_RESET_PORTRESET0);
+ writel(val, base + USB3_TEST_RESET);
+ fsleep(10);
+
+ val = readl(base + USB3_TEST_UTMICTRL2);
+ val &= ~USB3_TEST_UTMICTRL2_CTRL_MASK;
+ writel(val, base + USB3_TEST_UTMICTRL2);
+
+ writel(0, base + USB3_TEST_RESET);
+}
+
+static int rzg3e_phy_usb3test_phy_init(void __iomem *base)
+{
+ int ret;
+ u32 val;
+
+ writel(0x00000100, base + USB3_TEST_CREGCTRL);
+ writel(0x00000303, base + USB3_TEST_RSTCTRL);
+ fsleep(20);
+
+ writel(0x00000004, base + USB3_TEST_CLKCTRL);
+ writel(0x0000000d, base + USB3_TEST_LANECONFIG0);
+ writel(0x00000301, base + USB3_TEST_RSTCTRL);
+
+ ret = readl_poll_timeout_atomic(base + USB3_TEST_RAMCTRL, val,
+ val & USB3_TEST_RAMCTRL_SRAM_INIT_DONE, 1, 10000);
+ if (ret)
+ return ret;
+
+ writel(0x00000300, base + USB3_TEST_RSTCTRL);
+ writel(0x00000001, base + USB3_TEST_RAMCTRL);
+ writel(0x00000000, base + USB3_TEST_RSTCTRL);
+
+ return 0;
+}
+
+static int rzg3e_phy_usb3_init_helper(void __iomem *base)
+{
+ rzg3e_phy_usb2test_phy_init(base);
+
+ return rzg3e_phy_usb3test_phy_init(base);
+}
+
+static int rzg3e_phy_usb3_init(struct phy *p)
+{
+ struct rz_usb3 *r = phy_get_drvdata(p);
+ int ret = 0;
+
+ if (!r->skip_reinit)
+ ret = rzg3e_phy_usb3_init_helper(r->base);
+
+ return ret;
+}
+
+static const struct phy_ops rzg3e_phy_usb3_ops = {
+ .init = rzg3e_phy_usb3_init,
+ .owner = THIS_MODULE,
+};
+
+static int rzg3e_phy_usb3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy_provider *provider;
+ struct rz_usb3 *r;
+ struct phy *phy;
+ int ret;
+
+ r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL);
+ if (!r)
+ return -ENOMEM;
+
+ r->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(r->base))
+ return PTR_ERR(r->base);
+
+ r->rstc = devm_reset_control_get_shared(dev, NULL);
+ if (IS_ERR(r->rstc))
+ return dev_err_probe(dev, PTR_ERR(r->rstc), "failed to get reset\n");
+
+ ret = reset_control_deassert(r->rstc);
+ if (ret)
+ return ret;
+
+ /*
+ * devm_phy_create() will call pm_runtime_enable(&phy->dev);
+ * And then, phy-core will manage runtime pm for this device.
+ */
+ ret = devm_pm_runtime_enable(dev);
+ if (ret < 0)
+ return ret;
+
+ phy = devm_phy_create(dev, NULL, &rzg3e_phy_usb3_ops);
+ if (IS_ERR(phy))
+ return dev_err_probe(dev, PTR_ERR(phy), "failed to create USB3 PHY\n");
+
+ platform_set_drvdata(pdev, r);
+ phy_set_drvdata(phy, r);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(provider))
+ return dev_err_probe(dev, PTR_ERR(provider), "failed to register PHY provider\n");
+
+ return 0;
+}
+
+static void rzg3e_phy_usb3_remove(struct platform_device *pdev)
+{
+ struct rz_usb3 *r = dev_get_drvdata(&pdev->dev);
+
+ reset_control_assert(r->rstc);
+};
+
+static int rzg3e_phy_usb3_suspend(struct device *dev)
+{
+ struct rz_usb3 *r = dev_get_drvdata(dev);
+
+ pm_runtime_put(dev);
+ reset_control_assert(r->rstc);
+ r->skip_reinit = false;
+
+ return 0;
+}
+
+static int rzg3e_phy_usb3_resume(struct device *dev)
+{
+ struct rz_usb3 *r = dev_get_drvdata(dev);
+ int ret;
+
+ ret = reset_control_deassert(r->rstc);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret)
+ goto reset_assert;
+
+ ret = rzg3e_phy_usb3_init_helper(r->base);
+ if (ret)
+ goto pm_put;
+
+ r->skip_reinit = true;
+
+ return 0;
+
+pm_put:
+ pm_runtime_put(dev);
+reset_assert:
+ reset_control_assert(r->rstc);
+ return ret;
+}
+
+static const struct dev_pm_ops rzg3e_phy_usb3_pm = {
+ NOIRQ_SYSTEM_SLEEP_PM_OPS(rzg3e_phy_usb3_suspend, rzg3e_phy_usb3_resume)
+};
+
+static const struct of_device_id rzg3e_phy_usb3_match_table[] = {
+ { .compatible = "renesas,r9a09g047-usb3-phy" },
+ { /* Sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, rzg3e_phy_usb3_match_table);
+static struct platform_driver rzg3e_phy_usb3_driver = {
+ .driver = {
+ .name = "phy_rzg3e_usb3",
+ .of_match_table = rzg3e_phy_usb3_match_table,
+ .pm = pm_sleep_ptr(&rzg3e_phy_usb3_pm),
+ },
+ .probe = rzg3e_phy_usb3_probe,
+ .remove = rzg3e_phy_usb3_remove,
+};
+module_platform_driver(rzg3e_phy_usb3_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Renesas RZ/G3E USB3.0 PHY Driver");
+MODULE_AUTHOR("biju.das.jz@...renesas.com>");
--
2.43.0
Powered by blists - more mailing lists