| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250821152022.1065237-5-vladimir.oltean@nxp.com>
Date: Thu, 21 Aug 2025 18:20:11 +0300
From: Vladimir Oltean <vladimir.oltean@....com>
To: netdev@...r.kernel.org
Cc: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Daniel Golle <daniel@...rotopia.org>,
linux-kernel@...r.kernel.org,
Nikita Yushchenko <nikita.yoush@...entembedded.com>,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
Robert Marko <robimarko@...il.com>,
Paweł Owoc <frut3k7@...il.com>,
Sean Anderson <sean.anderson@...o.com>,
Jon Hunter <jonathanh@...dia.com>
Subject: [PATCH net-next 04/15] net: phy: aquantia: rename some aqr107 functions according to generation
Establish a more intuitive function naming convention in this driver.
A GenX PHY must only call aqr_genY_ functions, where Y <= X.
Loosely speaking, aqr107_ is representative of Gen2 and above, except for:
- aqr107_config_init()
- aqr107_suspend()
- aqr107_resume()
- aqr107_wait_processor_intensive_op()
which are also called by AQR105, so these are renamed to Gen1.
Actually aqr107_config_init() is renamed to aqr_gen1_config_init() when
called by AQR105, and aqr_gen2_config_init() when called by all other
PHYs. The Gen2 function calls the Gen1 function, so there is no
functional change. This prefaces further Gen2-specific initialization
steps which must be omitted for AQR105. These will be added to
aqr_gen2_config_init().
In fact, many PHY drivers call an aqr*_config_init() beneath their
generation's feature set: AQR114C is a Gen4 PHY which calls
aqr_gen2_config_init(), even though AQR113C, also a Gen4 PHY which
differs only in maximum link speed, calls the richer
aqr113c_config_init() which also sets phydev->possible_interfaces.
Many of the more subtle inconsistencies of this kind will be fixed up in
later changes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
drivers/net/phy/aquantia/aquantia_main.c | 117 ++++++++++++-----------
1 file changed, 61 insertions(+), 56 deletions(-)
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 7ac0b685a317..8136f7843a37 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -811,7 +811,7 @@ static int aqr107_config_mdi(struct phy_device *phydev)
mdi_conf | PMAPMD_RSVD_VEND_PROV_MDI_FORCE);
}
-static int aqr107_config_init(struct phy_device *phydev)
+static int aqr_gen1_config_init(struct phy_device *phydev)
{
struct aqr107_priv *priv = phydev->priv;
u32 led_idx;
@@ -860,6 +860,11 @@ static int aqr107_config_init(struct phy_device *phydev)
return 0;
}
+static int aqr_gen2_config_init(struct phy_device *phydev)
+{
+ return aqr_gen1_config_init(phydev);
+}
+
static int aqcs109_config_init(struct phy_device *phydev)
{
int ret;
@@ -921,7 +926,7 @@ static void aqr107_link_change_notify(struct phy_device *phydev)
phydev_info(phydev, "Aquantia 1000Base-T2 mode active\n");
}
-static int aqr107_wait_processor_intensive_op(struct phy_device *phydev)
+static int aqr_gen1_wait_processor_intensive_op(struct phy_device *phydev)
{
int val, err;
@@ -945,8 +950,8 @@ static int aqr107_wait_processor_intensive_op(struct phy_device *phydev)
return 0;
}
-static int aqr107_get_rate_matching(struct phy_device *phydev,
- phy_interface_t iface)
+static int aqr_gen2_get_rate_matching(struct phy_device *phydev,
+ phy_interface_t iface)
{
if (iface == PHY_INTERFACE_MODE_10GBASER ||
iface == PHY_INTERFACE_MODE_2500BASEX ||
@@ -955,7 +960,7 @@ static int aqr107_get_rate_matching(struct phy_device *phydev,
return RATE_MATCH_NONE;
}
-static int aqr107_suspend(struct phy_device *phydev)
+static int aqr_gen1_suspend(struct phy_device *phydev)
{
int err;
@@ -964,10 +969,10 @@ static int aqr107_suspend(struct phy_device *phydev)
if (err)
return err;
- return aqr107_wait_processor_intensive_op(phydev);
+ return aqr_gen1_wait_processor_intensive_op(phydev);
}
-static int aqr107_resume(struct phy_device *phydev)
+static int aqr_gen1_resume(struct phy_device *phydev)
{
int err;
@@ -976,7 +981,7 @@ static int aqr107_resume(struct phy_device *phydev)
if (err)
return err;
- return aqr107_wait_processor_intensive_op(phydev);
+ return aqr_gen1_wait_processor_intensive_op(phydev);
}
static const u16 aqr_global_cfg_regs[] = {
@@ -988,7 +993,7 @@ static const u16 aqr_global_cfg_regs[] = {
VEND1_GLOBAL_CFG_10G
};
-static int aqr107_fill_interface_modes(struct phy_device *phydev)
+static int aqr_gen2_fill_interface_modes(struct phy_device *phydev)
{
unsigned long *possible = phydev->possible_interfaces;
struct aqr107_priv *priv = phydev->priv;
@@ -1089,11 +1094,11 @@ static int aqr113c_config_init(struct phy_device *phydev)
priv->wait_on_global_cfg = true;
- ret = aqr107_config_init(phydev);
+ ret = aqr_gen2_config_init(phydev);
if (ret < 0)
return ret;
- ret = aqr107_fill_interface_modes(phydev);
+ ret = aqr_gen2_fill_interface_modes(phydev);
if (ret)
return ret;
@@ -1102,7 +1107,7 @@ static int aqr113c_config_init(struct phy_device *phydev)
if (ret)
return ret;
- return aqr107_wait_processor_intensive_op(phydev);
+ return aqr_gen1_wait_processor_intensive_op(phydev);
}
static int aqr107_probe(struct phy_device *phydev)
@@ -1144,13 +1149,13 @@ static struct phy_driver aqr_driver[] = {
.name = "Aquantia AQR105",
.get_features = aqr105_get_features,
.probe = aqr107_probe,
- .config_init = aqr107_config_init,
+ .config_init = aqr_gen1_config_init,
.config_aneg = aqr105_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr105_read_status,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_AQR106),
@@ -1164,16 +1169,16 @@ static struct phy_driver aqr_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
.name = "Aquantia AQR107",
.probe = aqr107_probe,
- .get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr107_config_init,
+ .get_rate_matching = aqr_gen2_get_rate_matching,
+ .config_init = aqr_gen2_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr107_read_status,
.get_tunable = aqr107_get_tunable,
.set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
@@ -1188,7 +1193,7 @@ static struct phy_driver aqr_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
.name = "Aquantia AQCS109",
.probe = aqr107_probe,
- .get_rate_matching = aqr107_get_rate_matching,
+ .get_rate_matching = aqr_gen2_get_rate_matching,
.config_init = aqcs109_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
@@ -1196,8 +1201,8 @@ static struct phy_driver aqr_driver[] = {
.read_status = aqr107_read_status,
.get_tunable = aqr107_get_tunable,
.set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
@@ -1213,16 +1218,16 @@ static struct phy_driver aqr_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_AQR111),
.name = "Aquantia AQR111",
.probe = aqr107_probe,
- .get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr107_config_init,
+ .get_rate_matching = aqr_gen2_get_rate_matching,
+ .config_init = aqr_gen2_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr107_read_status,
.get_tunable = aqr107_get_tunable,
.set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
@@ -1238,16 +1243,16 @@ static struct phy_driver aqr_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0),
.name = "Aquantia AQR111B0",
.probe = aqr107_probe,
- .get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr107_config_init,
+ .get_rate_matching = aqr_gen2_get_rate_matching,
+ .config_init = aqr_gen2_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr107_read_status,
.get_tunable = aqr107_get_tunable,
.set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
@@ -1276,10 +1281,10 @@ static struct phy_driver aqr_driver[] = {
.handle_interrupt = aqr_handle_interrupt,
.get_tunable = aqr107_get_tunable,
.set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
.read_status = aqr107_read_status,
- .get_rate_matching = aqr107_get_rate_matching,
+ .get_rate_matching = aqr_gen2_get_rate_matching,
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
@@ -1299,10 +1304,10 @@ static struct phy_driver aqr_driver[] = {
.handle_interrupt = aqr_handle_interrupt,
.get_tunable = aqr107_get_tunable,
.set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
.read_status = aqr107_read_status,
- .get_rate_matching = aqr107_get_rate_matching,
+ .get_rate_matching = aqr_gen2_get_rate_matching,
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
@@ -1317,10 +1322,10 @@ static struct phy_driver aqr_driver[] = {
.handle_interrupt = aqr_handle_interrupt,
.get_tunable = aqr107_get_tunable,
.set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
.read_status = aqr107_read_status,
- .get_rate_matching = aqr107_get_rate_matching,
+ .get_rate_matching = aqr_gen2_get_rate_matching,
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
@@ -1330,7 +1335,7 @@ static struct phy_driver aqr_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
.name = "Aquantia AQR113",
.probe = aqr107_probe,
- .get_rate_matching = aqr107_get_rate_matching,
+ .get_rate_matching = aqr_gen2_get_rate_matching,
.config_init = aqr113c_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
@@ -1338,8 +1343,8 @@ static struct phy_driver aqr_driver[] = {
.read_status = aqr107_read_status,
.get_tunable = aqr107_get_tunable,
.set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
@@ -1354,7 +1359,7 @@ static struct phy_driver aqr_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
.name = "Aquantia AQR113C",
.probe = aqr107_probe,
- .get_rate_matching = aqr107_get_rate_matching,
+ .get_rate_matching = aqr_gen2_get_rate_matching,
.config_init = aqr113c_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
@@ -1362,8 +1367,8 @@ static struct phy_driver aqr_driver[] = {
.read_status = aqr107_read_status,
.get_tunable = aqr107_get_tunable,
.set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
@@ -1378,16 +1383,16 @@ static struct phy_driver aqr_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_AQR114C),
.name = "Aquantia AQR114C",
.probe = aqr107_probe,
- .get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr107_config_init,
+ .get_rate_matching = aqr_gen2_get_rate_matching,
+ .config_init = aqr_gen2_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr107_read_status,
.get_tunable = aqr107_get_tunable,
.set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
@@ -1403,7 +1408,7 @@ static struct phy_driver aqr_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_AQR115C),
.name = "Aquantia AQR115C",
.probe = aqr107_probe,
- .get_rate_matching = aqr107_get_rate_matching,
+ .get_rate_matching = aqr_gen2_get_rate_matching,
.config_init = aqr113c_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
@@ -1411,8 +1416,8 @@ static struct phy_driver aqr_driver[] = {
.read_status = aqr107_read_status,
.get_tunable = aqr107_get_tunable,
.set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
@@ -1428,16 +1433,16 @@ static struct phy_driver aqr_driver[] = {
PHY_ID_MATCH_MODEL(PHY_ID_AQR813),
.name = "Aquantia AQR813",
.probe = aqr107_probe,
- .get_rate_matching = aqr107_get_rate_matching,
- .config_init = aqr107_config_init,
+ .get_rate_matching = aqr_gen2_get_rate_matching,
+ .config_init = aqr_gen2_config_init,
.config_aneg = aqr_config_aneg,
.config_intr = aqr_config_intr,
.handle_interrupt = aqr_handle_interrupt,
.read_status = aqr107_read_status,
.get_tunable = aqr107_get_tunable,
.set_tunable = aqr107_set_tunable,
- .suspend = aqr107_suspend,
- .resume = aqr107_resume,
+ .suspend = aqr_gen1_suspend,
+ .resume = aqr_gen1_resume,
.get_sset_count = aqr107_get_sset_count,
.get_strings = aqr107_get_strings,
.get_stats = aqr107_get_stats,
--
2.34.1
Powered by blists - more mailing lists