[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<SEYPR06MB5134106F024EB9EC32472A329D32A@SEYPR06MB5134.apcprd06.prod.outlook.com>
Date: Thu, 21 Aug 2025 06:17:56 +0000
From: Jacky Chou <jacky_chou@...eedtech.com>
To: Krzysztof Kozlowski <krzk@...nel.org>, "robh@...nel.org"
<robh@...nel.org>, "krzk+dt@...nel.org" <krzk+dt@...nel.org>,
"conor+dt@...nel.org" <conor+dt@...nel.org>, "joel@....id.au"
<joel@....id.au>, "andrew@...econstruct.com.au"
<andrew@...econstruct.com.au>, Z-Howard Chiu <howard_chiu@...eedtech.com>,
"arnd@...db.de" <arnd@...db.de>, "andrew+netdev@...n.ch"
<andrew+netdev@...n.ch>
CC: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-aspeed@...ts.ozlabs.org"
<linux-aspeed@...ts.ozlabs.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>
Subject:
回覆: [net] ARM: dts: aspeed: ast2600-evb: Correct phy-mode to rgmii-id
Hi Krzysztof,
Thank you for your reply.
> > According to the latest ethernet-controller.yaml.
> > Since there is no RGMII delay on AST2600 EVB, the phy-mode property of
> > all MACs change to "rgmii-id" mode.
> >
> > Fixes: 4d338ee40ba8 ("ARM: dts: aspeed: ast2600-evb: Enable RX delay
> > for MAC0/MAC1")
> > Fixes: 2ca5646b5c2f ("ARM: dts: aspeed: Add AST2600 and EVB")
> > Signed-off-by: Jacky Chou <jacky_chou@...eedtech.com>
> > ---
> > arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts | 8 ++++----
>
> No, DTS cannot go to net. Why do you propose that?
>
If there is a series of patches to add or fix about networking and this series
Includes dts or dt-binding, I send it to net or net-next.
So, this is just changing the DTS settings, even if it is for MAC,
wouldn't it be sent to net?
Thanks,
Jacky
Powered by blists - more mailing lists