[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250823160901.2177841-17-b-padhi@ti.com>
Date: Sat, 23 Aug 2025 21:38:44 +0530
From: Beleswar Padhi <b-padhi@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <afd@...com>, <u-kumar1@...com>, <hnagalla@...com>, <jm@...com>,
<b-padhi@...com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
Robert Nelson <robertcnelson@...il.com>
Subject: [PATCH v2 16/33] arm64: dts: ti: k3-am62-pocketbeagle2: Add missing cfg for TI IPC Firmware
The wkup_r5fss0_core0_memory_region is used to store the text/data
sections of the Device Manager (DM) firmware itself and is necessary for
platform boot. Whereas the wkup_r5fss0_core0_dma_memory_region is used
for allocating the Virtio buffers needed for IPC with the DM core which
could be optional. The labels were incorrectly used in the
k3-am62-pocketbeagle2.dts file. Correct the firmware memory region label
Currently, only mailbox node is enabled with FIFO assignment for a
single M4F remote core. Add the missing carveouts for WKUP R5F remote
processor, and enable that by associating to the above carveout and
mailbox. This config aligns with other AM62 boards and can be
refactored out later.
Signed-off-by: Beleswar Padhi <b-padhi@...com>
---
Cc: Robert Nelson <robertcnelson@...il.com>
Requesting for review/test of this patch
v2: Changelog:
1. Re-ordered patch from [PATCH 19/33] to [PATCH v2 16/33].
Link to v1:
https://lore.kernel.org/all/20250814223839.3256046-20-b-padhi@ti.com/
.../boot/dts/ti/k3-am62-pocketbeagle2.dts | 24 ++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
index 2eee5f638e0f..729901b2ca10 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
@@ -78,7 +78,13 @@ secure_ddr: optee@...00000 {
no-map;
};
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9da00000 0x00 0x100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: r5f-memory@...00000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9db00000 0x00 0xc00000>;
no-map;
@@ -299,6 +305,11 @@ mbox_m4_0: mbox-m4-0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
+
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
};
&main_uart0 {
@@ -358,6 +369,17 @@ &mcu_m4fss {
status = "okay";
};
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+ status = "okay";
+};
+
&mcu_pmx0 {
wkup_uart0_pins_default: wkup-uart0-default-pins {
pinctrl-single,pins = <
--
2.34.1
Powered by blists - more mailing lists