[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <96409a43-b3f7-4b9e-a1e8-fd0ac6503cd9@kernel.org>
Date: Sun, 24 Aug 2025 17:33:42 +0200
From: Sven Peter <sven@...nel.org>
To: Rob Herring <robh@...nel.org>, Janne Grunau <j@...nau.net>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Felipe Balbi <balbi@...nel.org>,
Alyssa Rosenzweig <alyssa@...enzweig.io>, Neal Gompa <neal@...pa.dev>,
Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>,
Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Philipp Zabel <p.zabel@...gutronix.de>, linux-usb@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
asahi@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
linux-phy@...ts.infradead.org
Subject: Re: [PATCH RFC 03/22] dt-bindings: phy: Add Apple Type-C PHY
On 22.08.25 01:00, Rob Herring wrote:
> On Thu, Aug 21, 2025 at 11:33 AM Janne Grunau <j@...nau.net> wrote:
>>
>> On Thu, Aug 21, 2025 at 03:38:55PM +0000, Sven Peter wrote:
[...]
>>> +
>>> +properties:
>>> + compatible:
>>> + enum:
>>> + - apple,t6000-atcphy
>>> + - apple,t6000-atcphy-dp-only # PHY hardwired to DP-to-HDMI converter on M2 Pro MacBook
>>
>> The comment is misleading, "t6000-atcphy-dp-only" would be for M1
>> Pro/Max Macbooks. M2 Pro/Max Macbooks use the same design so the
>> corresponding "apple,t6020-atcphy-dp-only" compatible is missing.
>> I'm not sure this is the correct design though as the HW block is
>> identical to "apple,t6000-atcphy".
>> I think it might be better to have either the DRM KMS driver or a
>> custom DP->HDMI drm_bridge switch the mode to DP-only.
>> Or atcphy could initialize itself to DP-only based on the available
>> ports.
>
> Doesn't sound like this should be a different compatible. There's a
> 'phy-mode' property or you can define the mode in the 'phys' cells for
> the DP controller.
Okay, makes sense. I'll drop the compatible.
I've only found "intel,phy-mode" inside bindings/phy but we can figure
this out later once we actually get to upstreaming what's required for
DisplayPort and mostly focus on USB3 for this series.
Thanks
Sven
Powered by blists - more mailing lists