| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5f01991c-8bd4-494a-92bf-d0f2751717f7@kernel.org>
Date: Mon, 25 Aug 2025 16:53:54 +0200
From: Hans Verkuil <hverkuil+cisco@...nel.org>
To: Yemike Abhilash Chandra <y-abhilashchandra@...com>, mchehab@...nel.org,
robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org
Cc: linux@...linux.org.uk, ardb@...nel.org, ebiggers@...nel.org,
geert+renesas@...der.be, claudiu.beznea@...on.dev, bparrot@...com,
andre.draszik@...aro.org, kuninori.morimoto.gx@...esas.com,
prabhakar.mahadev-lad.rj@...renesas.com, heikki.krogerus@...ux.intel.com,
kory.maincent@...tlin.com, florian.fainelli@...adcom.com, lumag@...nel.org,
dale@...nsworth.org, sbellary@...libre.com, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, dagriego@...lakesoftware.com,
u-kumar1@...com
Subject: Re: [PATCH V2 4/4] media: ti-vpe: Add the VIP driver
Hi Yemike,
A first review of this driver:
On 16/07/2025 13:19, Yemike Abhilash Chandra wrote:
> From: Dale Farnsworth <dale@...nsworth.org>
>
> VIP stands for Video Input Port; it can be found on devices such as DRA7xx
> and provides a parallel interface to a video source such as a sensor or TV
> decoder. Each VIP can support two inputs (slices) and an SoC can be
> configured with a variable number of VIPs. Each slice ican support two
> ports, each connected to it's own sub-device.
>
> Signed-off-by: Dale Farnsworth <dale@...nsworth.org>
> Signed-off-by: Benoit Parrot <bparrot@...com>
> Signed-off-by: Sukrut Bellary <sbellary@...libre.com>
> Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@...com>
> ---
> Changelog:
> Changes in v2:
> - Remove vip_dbg, vip_info, vip_err aliases and just use v4l2_dbg, v4l2_info
> and v4l2_err instead
> - Remove color space information from vip_formats struct
> - Use g_std instead of g_std_output
> - Do not touch pix.priv
> - Remove all comments with just register values
> - Remove support for vidioc_default ioctl
> - In case of any error while streaming, push all pending buffers to vb2
> - Address some minor comments made by Hans throughout the driver
> - Update copyright year
>
> drivers/media/platform/ti/Kconfig | 13 +
> drivers/media/platform/ti/vpe/Makefile | 2 +
> drivers/media/platform/ti/vpe/vip.c | 3824 ++++++++++++++++++++++++
> drivers/media/platform/ti/vpe/vip.h | 719 +++++
> 4 files changed, 4558 insertions(+)
> create mode 100644 drivers/media/platform/ti/vpe/vip.c
> create mode 100644 drivers/media/platform/ti/vpe/vip.h
>
<snip>
> +/*
> + * video ioctls
> + */
> +static int vip_querycap(struct file *file, void *priv,
> + struct v4l2_capability *cap)
> +{
> + struct vip_stream *stream = file2stream(file);
> + struct vip_port *port = stream->port;
> + struct vip_dev *dev = port->dev;
> + u32 vin_id = 1 + ((dev->instance_id - 1) * 2) + dev->slice_id;
> +
> + strscpy(cap->driver, VIP_MODULE_NAME, sizeof(cap->driver));
> + strscpy(cap->card, VIP_MODULE_NAME, sizeof(cap->card));
> +
> + snprintf(cap->bus_info, sizeof(cap->bus_info),
> + "platform:vip%1d:vin%1d%c:stream%1d", dev->instance_id, vin_id,
> + port->port_id == VIP_PORTA ? 'a' : 'b', stream->stream_id);
There is no need to fill bus_info for platform devices, it's automatically
filled in.
> + return 0;
> +}
> +
> +static int vip_enuminput(struct file *file, void *priv,
> + struct v4l2_input *inp)
> +{
> + struct vip_stream *stream = file2stream(file);
> +
> + if (inp->index)
> + return -EINVAL;
> +
> + inp->type = V4L2_INPUT_TYPE_CAMERA;
> + inp->std = stream->vfd->tvnorms;
> + sprintf(inp->name, "camera %u", stream->vfd->num);
I'd say "Camera" instead of "camera".
> +
> + return 0;
> +}
> +
> +static int vip_g_input(struct file *file, void *priv, unsigned int *i)
> +{
> + *i = 0;
> + return 0;
> +}
> +
> +static int vip_s_input(struct file *file, void *priv, unsigned int i)
> +{
> + if (i != 0)
> + return -EINVAL;
> + return 0;
> +}
> +
> +static int vip_querystd(struct file *file, void *fh, v4l2_std_id *std)
> +{
> + struct vip_stream *stream = file2stream(file);
> + struct vip_port *port = stream->port;
> +
> + *std = stream->vfd->tvnorms;
> + v4l2_subdev_call(port->subdev, video, querystd, std);
> + v4l2_dbg(1, debug, stream, "querystd: 0x%lx\n", (unsigned long)*std);
I'd drop these v4l2_dbg lines for ioctls. You can do that already using dev_debug:
https://linuxtv.org/downloads/v4l-dvb-apis-new/driver-api/v4l2-dev.html#video-device-debugging
> + return 0;
> +}
> +
> +static int vip_g_std(struct file *file, void *fh, v4l2_std_id *std)
> +{
> + struct vip_stream *stream = file2stream(file);
> + struct vip_port *port = stream->port;
> +
> + *std = stream->vfd->tvnorms;
> + v4l2_subdev_call(port->subdev, video, g_std, std);
> + v4l2_dbg(1, debug, stream, "g_std: 0x%lx\n", (unsigned long)*std);
> +
> + return 0;
> +}
> +
> +static int vip_s_std(struct file *file, void *fh, v4l2_std_id std)
> +{
> + struct vip_stream *stream = file2stream(file);
> + struct vip_port *port = stream->port;
> +
> + v4l2_dbg(1, debug, stream, "s_std: 0x%lx\n", (unsigned long)std);
> +
> + if (!(std & stream->vfd->tvnorms)) {
> + v4l2_dbg(1, debug, stream, "s_std after check: 0x%lx\n",
> + (unsigned long)std);
> + return -EINVAL;
> + }
This needs a vb2_is_busy() check to avoid changing standard while streaming.
Return -EBUSY in that case.
> +
> + v4l2_subdev_call(port->subdev, video, s_std, std);
> + return 0;
> +}
> +
> +static int vip_enum_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_fmtdesc *f)
> +{
> + struct vip_stream *stream = file2stream(file);
> + struct vip_port *port = stream->port;
> + struct vip_fmt *fmt;
> +
> + v4l2_dbg(3, debug, stream, "enum_fmt index:%d\n", f->index);
> + if (f->index >= port->num_active_fmt)
> + return -EINVAL;
> +
> + fmt = port->active_fmt[f->index];
> +
> + f->pixelformat = fmt->fourcc;
> +
> + return 0;
> +}
> +
> +static int vip_enum_framesizes(struct file *file, void *priv,
> + struct v4l2_frmsizeenum *f)
> +{
> + struct vip_stream *stream = file2stream(file);
> + struct vip_port *port = stream->port;
> + struct vip_fmt *fmt;
> + int ret;
> + struct v4l2_subdev_frame_size_enum fse = {
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> + .pad = 0,
> + };
> +
> + fmt = find_port_format_by_pix(port, f->pixel_format);
> + if (!fmt)
> + return -EINVAL;
> +
> + fse.index = f->index;
> + fse.code = fmt->code;
> + ret = v4l2_subdev_call(port->subdev, pad, enum_frame_size, NULL, &fse);
> + if (ret)
> + return -EINVAL;
> +
> + v4l2_dbg(1, debug, stream, "%s: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
> + __func__, fse.index, fse.code, fse.min_width, fse.max_width,
> + fse.min_height, fse.max_height);
> +
> + f->type = V4L2_FRMSIZE_TYPE_DISCRETE;
> + f->discrete.width = fse.max_width;
> + f->discrete.height = fse.max_height;
> +
> + return 0;
> +}
I'm not sure why this fails with v4l2-compliance. I think it is related to ambiguities in the
V4L2 API, but I can't remember the details.
> +
> +static int vip_enum_frameintervals(struct file *file, void *priv,
> + struct v4l2_frmivalenum *f)
> +{
> + struct vip_stream *stream = file2stream(file);
> + struct vip_port *port = stream->port;
> + struct vip_fmt *fmt;
> + struct v4l2_subdev_frame_interval_enum fie = {
> + .index = f->index,
> + .width = f->width,
> + .height = f->height,
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> + };
> + int ret;
> +
> + fmt = find_port_format_by_pix(port, f->pixel_format);
> + if (!fmt)
> + return -EINVAL;
> +
> + fie.code = fmt->code;
> + ret = v4l2_subdev_call(port->subdev, pad, enum_frame_interval,
> + NULL, &fie);
> + if (ret)
> + return ret;
> + f->type = V4L2_FRMIVAL_TYPE_DISCRETE;
> + f->discrete = fie.interval;
> +
> + return 0;
> +}
> +
> +static int vip_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
> +{
> + struct vip_stream *stream = video_drvdata(file);
> + struct vip_port *port = stream->port;
> +
> + return v4l2_g_parm_cap(video_devdata(file), port->subdev, a);
> +}
> +
> +static int vip_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
> +{
> + struct vip_stream *stream = video_drvdata(file);
> + struct vip_port *port = stream->port;
> +
> + return v4l2_s_parm_cap(video_devdata(file), port->subdev, a);
> +}
> +
> +static int vip_calc_format_size(struct vip_port *port,
> + struct vip_fmt *fmt,
> + struct v4l2_format *f)
> +{
> + enum v4l2_field *field;
> + unsigned int stride;
> +
> + if (!fmt) {
> + v4l2_dbg(2, debug, port,
> + "no vip_fmt format provided!\n");
> + return -EINVAL;
> + }
> +
> + field = &f->fmt.pix.field;
> + if (*field == V4L2_FIELD_ANY)
> + *field = V4L2_FIELD_NONE;
> + else if (V4L2_FIELD_NONE != *field && V4L2_FIELD_ALTERNATE != *field)
> + return -EINVAL;
> +
> + v4l_bound_align_image(&f->fmt.pix.width, MIN_W, MAX_W, W_ALIGN,
> + &f->fmt.pix.height, MIN_H, MAX_H, H_ALIGN,
> + S_ALIGN);
> +
> + stride = f->fmt.pix.width * (fmt->vpdma_fmt[0]->depth >> 3);
> + f->fmt.pix.bytesperline = ALIGN(stride, VPDMA_STRIDE_ALIGN);
> +
> + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
> + if (fmt->coplanar) {
> + f->fmt.pix.sizeimage += f->fmt.pix.height *
> + f->fmt.pix.bytesperline *
> + fmt->vpdma_fmt[VIP_CHROMA]->depth >> 3;
> + }
> +
> + f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
> +
> + v4l2_dbg(3, debug, port, "calc_format_size: fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
> + fourcc_to_str(f->fmt.pix.pixelformat),
> + f->fmt.pix.width, f->fmt.pix.height,
> + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
> +
> + return 0;
> +}
> +
> +static inline bool vip_is_size_dma_aligned(u32 bpp, u32 width)
> +{
> + return ((width * bpp) == ALIGN(width * bpp, VPDMA_STRIDE_ALIGN));
> +}
> +
> +static int vip_try_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_format *f)
> +{
> + struct vip_stream *stream = file2stream(file);
> + struct vip_port *port = stream->port;
> + struct vip_fmt *fmt;
> + u32 best_width, best_height, largest_width, largest_height;
> + int ret, found;
> + enum vip_csc_state csc_direction;
> + struct v4l2_subdev_frame_size_enum fse = {
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> + .pad = 0,
> + };
> +
> + v4l2_dbg(3, debug, stream, "try_fmt fourcc:%s size: %dx%d\n",
> + fourcc_to_str(f->fmt.pix.pixelformat),
> + f->fmt.pix.width, f->fmt.pix.height);
> +
> + fmt = find_port_format_by_pix(port, f->fmt.pix.pixelformat);
> + if (!fmt) {
> + v4l2_dbg(2, debug, stream,
> + "Fourcc format (0x%08x) not found.\n",
> + f->fmt.pix.pixelformat);
> +
> + /* Just get the first one enumerated */
> + fmt = port->active_fmt[0];
> + f->fmt.pix.pixelformat = fmt->fourcc;
> + }
> +
> + csc_direction = vip_csc_direction(fmt->code, fmt->finfo);
> + if (csc_direction != VIP_CSC_NA) {
> + if (!is_csc_available(port)) {
> + v4l2_dbg(2, debug, stream,
> + "CSC not available for Fourcc format (0x%08x).\n",
> + f->fmt.pix.pixelformat);
> +
> + /* Just get the first one enumerated */
> + fmt = port->active_fmt[0];
> + f->fmt.pix.pixelformat = fmt->fourcc;
> + /* re-evaluate the csc_direction here */
> + csc_direction = vip_csc_direction(fmt->code,
> + fmt->finfo);
> + } else {
> + v4l2_dbg(3, debug, stream, "CSC active on Port %c: going %s\n",
> + port->port_id == VIP_PORTA ? 'A' : 'B',
> + (csc_direction == VIP_CSC_Y2R) ? "Y2R" : "R2Y");
> + }
> + }
> +
> + /*
> + * Given that sensors might support multiple mbus code we need
> + * to use the one that matches the requested pixel format
> + */
> + port->try_mbus_framefmt = port->mbus_framefmt;
> + port->try_mbus_framefmt.code = fmt->code;
> +
> + /* check for/find a valid width/height */
> + ret = 0;
> + found = false;
> + best_width = 0;
> + best_height = 0;
> + largest_width = 0;
> + largest_height = 0;
> +
> + fse.code = fmt->code;
> + for (fse.index = 0; ; fse.index++) {
> + u32 bpp = fmt->vpdma_fmt[0]->depth >> 3;
> +
> + ret = v4l2_subdev_call(port->subdev, pad,
> + enum_frame_size, NULL, &fse);
> + if (ret)
> + break;
> +
> + v4l2_dbg(3, debug, stream, "try_fmt loop:%d fourcc:%s size: %dx%d\n",
> + fse.index, fourcc_to_str(f->fmt.pix.pixelformat),
> + fse.max_width, fse.max_height);
> +
> + if (!vip_is_size_dma_aligned(bpp, fse.max_width))
> + continue;
> +
> + if (fse.max_width >= largest_width &&
> + fse.max_height >= largest_height) {
> + v4l2_dbg(3, debug, stream, "try_fmt loop:%d found new larger: %dx%d\n",
> + fse.index, fse.max_width, fse.max_height);
> + largest_width = fse.max_width;
> + largest_height = fse.max_height;
> + }
> +
> + if (fse.max_width >= f->fmt.pix.width &&
> + fse.max_height >= f->fmt.pix.height) {
> + v4l2_dbg(3, debug, stream, "try_fmt loop:%d found at least larger: %dx%d\n",
> + fse.index, fse.max_width, fse.max_height);
> +
> + if (!best_width ||
> + ((abs(best_width - f->fmt.pix.width) >=
> + abs(fse.max_width - f->fmt.pix.width)) &&
> + (abs(best_height - f->fmt.pix.height) >=
> + abs(fse.max_height - f->fmt.pix.height)))) {
> + best_width = fse.max_width;
> + best_height = fse.max_height;
> + v4l2_dbg(3, debug, stream, "try_fmt loop:%d found new best: %dx%d\n",
> + fse.index, fse.max_width,
> + fse.max_height);
> + }
> + }
> +
> + if (f->fmt.pix.width == fse.max_width &&
> + f->fmt.pix.height == fse.max_height) {
> + found = true;
> + v4l2_dbg(3, debug, stream, "try_fmt loop:%d found direct match: %dx%d\n",
> + fse.index, fse.max_width,
> + fse.max_height);
> + break;
> + }
> +
> + if (f->fmt.pix.width >= fse.min_width &&
> + f->fmt.pix.width <= fse.max_width &&
> + f->fmt.pix.height >= fse.min_height &&
> + f->fmt.pix.height <= fse.max_height) {
> + found = true;
> + v4l2_dbg(3, debug, stream, "try_fmt loop:%d found direct range match: %dx%d\n",
> + fse.index, fse.max_width,
> + fse.max_height);
> + break;
> + }
> + }
> +
> + if (found) {
> + port->try_mbus_framefmt.width = f->fmt.pix.width;
> + port->try_mbus_framefmt.height = f->fmt.pix.height;
> + /* No need to check for scaling */
> + goto calc_size;
> + } else if (f->fmt.pix.width > largest_width) {
> + port->try_mbus_framefmt.width = largest_width;
> + port->try_mbus_framefmt.height = largest_height;
> + } else if (best_width) {
> + port->try_mbus_framefmt.width = best_width;
> + port->try_mbus_framefmt.height = best_height;
> + } else {
> + /* use existing values as default */
> + }
> +
> + v4l2_dbg(3, debug, stream, "try_fmt best subdev size: %dx%d\n",
> + port->try_mbus_framefmt.width,
> + port->try_mbus_framefmt.height);
> +
> + if (is_scaler_available(port) &&
> + csc_direction != VIP_CSC_Y2R &&
> + !vip_is_mbuscode_raw(fmt->code) &&
> + f->fmt.pix.height <= port->try_mbus_framefmt.height &&
> + port->try_mbus_framefmt.height <= SC_MAX_PIXEL_HEIGHT &&
> + port->try_mbus_framefmt.width <= SC_MAX_PIXEL_WIDTH) {
> + /*
> + * Scaler is only accessible if the dst colorspace is YUV.
> + * As the input to the scaler must be in YUV mode only.
> + *
> + * Scaling up is allowed only horizontally.
> + */
> + unsigned int hratio, vratio, width_align, height_align;
> + u32 bpp = fmt->vpdma_fmt[0]->depth >> 3;
> +
> + v4l2_dbg(3, debug, stream, "Scaler active on Port %c: requesting %dx%d\n",
> + port->port_id == VIP_PORTA ? 'A' : 'B',
> + f->fmt.pix.width, f->fmt.pix.height);
> +
> + /* Just make sure everything is properly aligned */
> + width_align = ALIGN(f->fmt.pix.width * bpp, VPDMA_STRIDE_ALIGN);
> + width_align /= bpp;
> + height_align = ALIGN(f->fmt.pix.height, 2);
> +
> + f->fmt.pix.width = width_align;
> + f->fmt.pix.height = height_align;
> +
> + hratio = f->fmt.pix.width * 1000 /
> + port->try_mbus_framefmt.width;
> + vratio = f->fmt.pix.height * 1000 /
> + port->try_mbus_framefmt.height;
> + if (hratio < 125) {
> + f->fmt.pix.width = port->try_mbus_framefmt.width / 8;
> + v4l2_dbg(3, debug, stream, "Horizontal scaling ratio out of range adjusting -> %d\n",
> + f->fmt.pix.width);
> + }
> +
> + if (vratio < 188) {
> + f->fmt.pix.height = port->try_mbus_framefmt.height / 4;
> + v4l2_dbg(3, debug, stream, "Vertical scaling ratio out of range adjusting -> %d\n",
> + f->fmt.pix.height);
> + }
> + v4l2_dbg(3, debug, stream, "Scaler: got %dx%d\n",
> + f->fmt.pix.width, f->fmt.pix.height);
> + } else {
> + /* use existing values as default */
> + f->fmt.pix.width = port->try_mbus_framefmt.width;
> + f->fmt.pix.height = port->try_mbus_framefmt.height;
> + }
> +
> +calc_size:
> + /* That we have a fmt calculate imagesize and bytesperline */
> + return vip_calc_format_size(port, fmt, f);
> +}
> +
> +static int vip_g_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_format *f)
> +{
> + struct vip_stream *stream = file2stream(file);
> + struct vip_port *port = stream->port;
> + struct vip_fmt *fmt = port->fmt;
> +
> + /* Use last known values or defaults */
> + f->fmt.pix.width = stream->width;
> + f->fmt.pix.height = stream->height;
> + f->fmt.pix.pixelformat = port->fmt->fourcc;
> + f->fmt.pix.field = stream->sup_field;
> + f->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
> + f->fmt.pix.bytesperline = stream->bytesperline;
> + f->fmt.pix.sizeimage = stream->sizeimage;
> +
> + v4l2_dbg(3, debug, stream,
> + "g_fmt fourcc:%s code: %04x size: %dx%d bpl:%d img_size:%d\n",
> + fourcc_to_str(f->fmt.pix.pixelformat),
> + fmt->code,
> + f->fmt.pix.width, f->fmt.pix.height,
> + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
> + v4l2_dbg(3, debug, stream, "g_fmt vpdma data type: 0x%02X\n",
> + port->fmt->vpdma_fmt[0]->data_type);
> +
> + return 0;
> +}
> +
> +static int vip_s_fmt_vid_cap(struct file *file, void *priv,
> + struct v4l2_format *f)
> +{
> + struct vip_stream *stream = file2stream(file);
> + struct vip_port *port = stream->port;
> + struct v4l2_subdev_format sfmt;
> + struct v4l2_mbus_framefmt *mf;
> + enum vip_csc_state csc_direction;
> + int ret;
> +
> + v4l2_dbg(3, debug, stream, "s_fmt input fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
> + fourcc_to_str(f->fmt.pix.pixelformat),
> + f->fmt.pix.width, f->fmt.pix.height,
> + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
> +
> + ret = vip_try_fmt_vid_cap(file, priv, f);
> + if (ret)
> + return ret;
> +
> + v4l2_dbg(3, debug, stream, "s_fmt try_fmt fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
> + fourcc_to_str(f->fmt.pix.pixelformat),
> + f->fmt.pix.width, f->fmt.pix.height,
> + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
> +
> + if (vb2_is_busy(&stream->vb_vidq)) {
> + v4l2_err(stream, "%s queue busy\n", __func__);
> + return -EBUSY;
> + }
> +
> + /*
> + * Check if we need the scaler or not
> + *
> + * Since on previous S_FMT call the scaler might have been
> + * allocated if it is not needed in this instance we will
> + * attempt to free it just in case.
> + *
> + * free_scaler() is harmless unless the current port
> + * allocated it.
> + */
> + if (f->fmt.pix.width == port->try_mbus_framefmt.width &&
> + f->fmt.pix.height == port->try_mbus_framefmt.height)
> + free_scaler(port);
> + else
> + allocate_scaler(port);
> +
> + port->fmt = find_port_format_by_pix(port,
> + f->fmt.pix.pixelformat);
> + stream->width = f->fmt.pix.width;
> + stream->height = f->fmt.pix.height;
> + stream->bytesperline = f->fmt.pix.bytesperline;
> + stream->sizeimage = f->fmt.pix.sizeimage;
> + stream->sup_field = f->fmt.pix.field;
> +
> + port->c_rect.left = 0;
> + port->c_rect.top = 0;
> + port->c_rect.width = stream->width;
> + port->c_rect.height = stream->height;
> +
> + /*
> + * Check if we need the csc unit or not
> + *
> + * Since on previous S_FMT call, the csc might have been
> + * allocated if it is not needed in this instance we will
> + * attempt to free it just in case.
> + *
> + * free_csc() is harmless unless the current port
> + * allocated it.
> + */
> + csc_direction = vip_csc_direction(port->fmt->code, port->fmt->finfo);
> + if (csc_direction == VIP_CSC_NA)
> + free_csc(port);
> + else
> + allocate_csc(port, csc_direction);
> +
> + if (stream->sup_field == V4L2_FIELD_ALTERNATE)
> + port->flags |= FLAG_INTERLACED;
> + else
> + port->flags &= ~FLAG_INTERLACED;
> +
> + v4l2_dbg(3, debug, stream, "s_fmt fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
> + fourcc_to_str(f->fmt.pix.pixelformat),
> + f->fmt.pix.width, f->fmt.pix.height,
> + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
> +
> + memset(&sfmt, 0, sizeof(sfmt));
> + mf = &sfmt.format;
> + v4l2_fill_mbus_format(mf, &f->fmt.pix, port->fmt->code);
> + /* Make sure to use the subdev size found in the try_fmt */
> + mf->width = port->try_mbus_framefmt.width;
> + mf->height = port->try_mbus_framefmt.height;
> +
> + v4l2_dbg(3, debug, stream, "s_fmt pix_to_mbus mbus_code: %04X size: %dx%d\n",
> + mf->code,
> + mf->width, mf->height);
> +
> + sfmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> + sfmt.pad = 0;
> + ret = v4l2_subdev_call(port->subdev, pad, set_fmt, NULL, &sfmt);
> + if (ret) {
> + v4l2_dbg(1, debug, stream, "set_fmt failed in subdev\n");
> + return ret;
> + }
> +
> + /* Save it */
> + port->mbus_framefmt = *mf;
> +
> + v4l2_dbg(3, debug, stream, "s_fmt subdev fmt mbus_code: %04X size: %dx%d\n",
> + port->mbus_framefmt.code,
> + port->mbus_framefmt.width, port->mbus_framefmt.height);
> + v4l2_dbg(3, debug, stream, "s_fmt vpdma data type: 0x%02X\n",
> + port->fmt->vpdma_fmt[0]->data_type);
> +
> + return 0;
> +}
> +
> +/*
> + * Does the exact opposite of set_fmt_params
> + * It makes sure the DataPath register is sane after tear down
> + */
> +static void unset_fmt_params(struct vip_stream *stream)
> +{
> + struct vip_dev *dev = stream->port->dev;
> + struct vip_port *port = stream->port;
> +
> + stream->sequence = 0;
> + stream->field = V4L2_FIELD_TOP;
> +
> + if (port->csc == VIP_CSC_Y2R) {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev, VIP_CSC_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_RGB_SRC_DATA_SELECT, 0);
> + } else {
> + vip_set_slice_path(dev, VIP_CSC_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> + }
> + /* We are done */
> + return;
> + } else if (port->csc == VIP_CSC_R2Y) {
> + if (port->scaler && port->fmt->coplanar) {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev,
> + VIP_CSC_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_SC_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT,
> + 0);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev,
> + VIP_RGB_OUT_HI_DATA_SELECT,
> + 0);
> + }
> + } else if (port->scaler) {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev,
> + VIP_CSC_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_SC_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT,
> + 0);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev,
> + VIP_RGB_OUT_HI_DATA_SELECT,
> + 0);
> + }
> + } else if (port->fmt->coplanar) {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev,
> + VIP_CSC_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT,
> + 0);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev,
> + VIP_RGB_OUT_HI_DATA_SELECT,
> + 0);
> + }
> + } else {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev,
> + VIP_CSC_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT,
> + 0);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev,
> + VIP_RGB_OUT_HI_DATA_SELECT,
> + 0);
> + }
> + }
> + /* We are done */
> + return;
> + } else if (v4l2_is_format_rgb(port->fmt->finfo)) {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev,
> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> + }
> + /* We are done */
> + return;
> + }
> +
> + if (port->scaler && port->fmt->coplanar) {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> + } else {
> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_2_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> + }
> + } else if (port->scaler) {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> + } else {
> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_2_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev, VIP_CHR_DS_2_DATA_BYPASS, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> + }
> + } else if (port->fmt->coplanar) {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> + } else {
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_2_SRC_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_CHR_DS_2_DATA_BYPASS, 0);
> + vip_set_slice_path(dev,
> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> + }
> + } else {
> + /*
> + * We undo all data path setting except for the multi
> + * stream case.
> + * Because we cannot disrupt other on-going capture if only
> + * one stream is terminated the other might still be going
> + */
> + vip_set_slice_path(dev, VIP_MULTI_CHANNEL_DATA_SELECT, 1);
> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> + }
> +}
> +
> +/*
> + * Set the registers that are modified when the video format changes.
> + */
> +static void set_fmt_params(struct vip_stream *stream)
> +{
> + struct vip_dev *dev = stream->port->dev;
> + struct vip_port *port = stream->port;
> +
> + stream->sequence = 0;
> + stream->field = V4L2_FIELD_TOP;
> +
> + if (port->csc == VIP_CSC_Y2R) {
> + port->flags &= ~FLAG_MULT_PORT;
> + /* Set alpha component in background color */
> + vpdma_set_bg_color(dev->shared->vpdma,
> + (struct vpdma_data_format *)
> + port->fmt->vpdma_fmt[0],
> + 0xff);
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev, VIP_CSC_SRC_DATA_SELECT, 1);
> + vip_set_slice_path(dev,
> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 1);
> + vip_set_slice_path(dev, VIP_RGB_SRC_DATA_SELECT, 1);
> + } else {
> + vip_set_slice_path(dev, VIP_CSC_SRC_DATA_SELECT, 2);
> + vip_set_slice_path(dev,
> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 1);
> + }
> + /* We are done */
> + return;
> + } else if (port->csc == VIP_CSC_R2Y) {
> + port->flags &= ~FLAG_MULT_PORT;
> + if (port->scaler && port->fmt->coplanar) {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev,
> + VIP_CSC_SRC_DATA_SELECT, 4);
> + vip_set_slice_path(dev,
> + VIP_SC_SRC_DATA_SELECT, 1);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT,
> + 1);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev,
> + VIP_RGB_OUT_HI_DATA_SELECT,
> + 0);
> + } else {
> + v4l2_err(stream, "RGB sensor can only be on Port A\n");
> + }
> + } else if (port->scaler) {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev,
> + VIP_CSC_SRC_DATA_SELECT, 4);
> + vip_set_slice_path(dev,
> + VIP_SC_SRC_DATA_SELECT, 1);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT,
> + 1);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_DATA_BYPASS, 1);
> + vip_set_slice_path(dev,
> + VIP_RGB_OUT_HI_DATA_SELECT,
> + 0);
> + } else {
> + v4l2_err(stream, "RGB sensor can only be on Port A\n");
> + }
> + } else if (port->fmt->coplanar) {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev,
> + VIP_CSC_SRC_DATA_SELECT, 4);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT,
> + 2);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev,
> + VIP_RGB_OUT_HI_DATA_SELECT,
> + 0);
> + } else {
> + v4l2_err(stream, "RGB sensor can only be on Port A\n");
> + }
> + } else {
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev,
> + VIP_CSC_SRC_DATA_SELECT, 4);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT,
> + 2);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_DATA_BYPASS, 1);
> + vip_set_slice_path(dev,
> + VIP_RGB_OUT_HI_DATA_SELECT,
> + 0);
> + } else {
> + v4l2_err(stream, "RGB sensor can only be on Port A\n");
> + }
> + }
> + /* We are done */
> + return;
> + } else if (v4l2_is_format_rgb(port->fmt->finfo)) {
> + port->flags &= ~FLAG_MULT_PORT;
> + /* Set alpha component in background color */
> + vpdma_set_bg_color(dev->shared->vpdma,
> + (struct vpdma_data_format *)
> + port->fmt->vpdma_fmt[0],
> + 0xff);
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev,
> + VIP_MULTI_CHANNEL_DATA_SELECT, 1);
> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 1);
> + } else {
> + v4l2_err(stream, "RGB sensor can only be on Port A\n");
> + }
> + /* We are done */
> + return;
> + }
> +
> + if (port->scaler && port->fmt->coplanar) {
> + port->flags &= ~FLAG_MULT_PORT;
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 2);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT, 1);
> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> + } else {
> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 3);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_2_SRC_DATA_SELECT, 1);
> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> + vip_set_slice_path(dev,
> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> + }
> + } else if (port->scaler) {
> + port->flags &= ~FLAG_MULT_PORT;
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 2);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT, 1);
> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 1);
> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> + } else {
> + vip_set_slice_path(dev, VIP_SC_SRC_DATA_SELECT, 3);
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_2_SRC_DATA_SELECT, 1);
> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 1);
> + vip_set_slice_path(dev, VIP_CHR_DS_2_DATA_BYPASS, 1);
> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> + }
> + } else if (port->fmt->coplanar) {
> + port->flags &= ~FLAG_MULT_PORT;
> + if (port->port_id == VIP_PORTA) {
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_1_SRC_DATA_SELECT, 3);
> + vip_set_slice_path(dev, VIP_CHR_DS_1_DATA_BYPASS, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_HI_DATA_SELECT, 0);
> + } else {
> + vip_set_slice_path(dev,
> + VIP_CHR_DS_2_SRC_DATA_SELECT, 4);
> + vip_set_slice_path(dev, VIP_CHR_DS_2_DATA_BYPASS, 0);
> + vip_set_slice_path(dev,
> + VIP_MULTI_CHANNEL_DATA_SELECT, 0);
> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> + }
> + } else {
> + port->flags |= FLAG_MULT_PORT;
> + vip_set_slice_path(dev, VIP_MULTI_CHANNEL_DATA_SELECT, 1);
> + vip_set_slice_path(dev, VIP_RGB_OUT_LO_DATA_SELECT, 0);
> + }
> +}
> +
> +static int vip_g_selection(struct file *file, void *fh,
> + struct v4l2_selection *s)
> +{
> + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> + return -EINVAL;
> +
> + struct vip_stream *stream = file2stream(file);
> +
> + switch (s->target) {
> + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> + case V4L2_SEL_TGT_CROP_BOUNDS:
> + case V4L2_SEL_TGT_CROP_DEFAULT:
> + s->r.left = 0;
> + s->r.top = 0;
> + s->r.width = stream->width;
> + s->r.height = stream->height;
> + return 0;
> +
> + case V4L2_SEL_TGT_COMPOSE:
> + case V4L2_SEL_TGT_CROP:
> + s->r = stream->port->c_rect;
This makes no sense having the same rectangle for both crop and compose.
What exactly is supported w.r.t. crop and compose?
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int enclosed_rectangle(struct v4l2_rect *a, struct v4l2_rect *b)
> +{
> + if (a->left < b->left || a->top < b->top)
> + return 0;
> + if (a->left + a->width > b->left + b->width)
> + return 0;
> + if (a->top + a->height > b->top + b->height)
> + return 0;
> +
> + return 1;
> +}
> +
> +static int vip_s_selection(struct file *file, void *fh,
> + struct v4l2_selection *s)
> +{
> + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
> + return -EINVAL;
> +
This is missing checks against s->target.
> + struct vip_stream *stream = file2stream(file);
> + struct v4l2_rect r = s->r;
> +
> + v4l_bound_align_image(&r.width, 0, stream->width, 0,
> + &r.height, 0, stream->height, 0, 0);
> +
> + r.left = clamp_t(unsigned int, r.left, 0, stream->width - r.width);
> + r.top = clamp_t(unsigned int, r.top, 0, stream->height - r.height);
> +
> + if (s->flags & V4L2_SEL_FLAG_LE && !enclosed_rectangle(&r, &s->r))
> + return -ERANGE;
> +
> + if (s->flags & V4L2_SEL_FLAG_GE && !enclosed_rectangle(&s->r, &r))
> + return -ERANGE;
> +
> + s->r = r;
> + stream->port->c_rect = r;
> +
> + v4l2_dbg(1, debug, stream, "cropped (%d,%d)/%dx%d of %dx%d\n",
Based on this comment I suspect you only support cropping, not composing.
> + r.left, r.top, r.width, r.height,
> + stream->width, stream->height);
> +
> + return 0;
> +}
> +
> +static const struct v4l2_ioctl_ops vip_ioctl_ops = {
> + .vidioc_querycap = vip_querycap,
> + .vidioc_enum_input = vip_enuminput,
> + .vidioc_g_input = vip_g_input,
> + .vidioc_s_input = vip_s_input,
> +
> + .vidioc_querystd = vip_querystd,
> + .vidioc_g_std = vip_g_std,
> + .vidioc_s_std = vip_s_std,
> +
> + .vidioc_enum_fmt_vid_cap = vip_enum_fmt_vid_cap,
> + .vidioc_g_fmt_vid_cap = vip_g_fmt_vid_cap,
> + .vidioc_try_fmt_vid_cap = vip_try_fmt_vid_cap,
> + .vidioc_s_fmt_vid_cap = vip_s_fmt_vid_cap,
> +
> + .vidioc_enum_frameintervals = vip_enum_frameintervals,
> + .vidioc_enum_framesizes = vip_enum_framesizes,
> + .vidioc_s_parm = vip_s_parm,
> + .vidioc_g_parm = vip_g_parm,
> + .vidioc_g_selection = vip_g_selection,
> + .vidioc_s_selection = vip_s_selection,
> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> + .vidioc_querybuf = vb2_ioctl_querybuf,
> + .vidioc_qbuf = vb2_ioctl_qbuf,
> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> + .vidioc_expbuf = vb2_ioctl_expbuf,
> +
> + .vidioc_streamon = vb2_ioctl_streamon,
> + .vidioc_streamoff = vb2_ioctl_streamoff,
> + .vidioc_log_status = v4l2_ctrl_log_status,
> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> +};
> +
> +/*
> + * Videobuf operations
> + */
> +static int vip_queue_setup(struct vb2_queue *vq,
> + unsigned int *nbuffers, unsigned int *nplanes,
> + unsigned int sizes[], struct device *alloc_devs[])
> +{
> + struct vip_stream *stream = vb2_get_drv_priv(vq);
> + unsigned int size = stream->sizeimage;
> +
> + if (vq->max_num_buffers + *nbuffers < 3)
> + *nbuffers = 3 - vq->max_num_buffers;
> +
> + if (*nplanes) {
> + if (sizes[0] < size)
> + return -EINVAL;
> + size = sizes[0];
> + }
> +
> + *nplanes = 1;
> + sizes[0] = size;
> +
> + v4l2_dbg(1, debug, stream, "get %d buffer(s) of size %d each.\n",
> + *nbuffers, sizes[0]);
> +
> + return 0;
> +}
> +
> +static int vip_buf_prepare(struct vb2_buffer *vb)
> +{
> + struct vip_stream *stream = vb2_get_drv_priv(vb->vb2_queue);
> +
> + if (vb2_plane_size(vb, 0) < stream->sizeimage) {
> + v4l2_dbg(1, debug, stream,
> + "%s data will not fit into plane (%lu < %lu)\n",
> + __func__, vb2_plane_size(vb, 0),
> + (long)stream->sizeimage);
> + return -EINVAL;
> + }
> +
> + vb2_set_plane_payload(vb, 0, stream->sizeimage);
> +
> + return 0;
> +}
> +
> +static void vip_buf_queue(struct vb2_buffer *vb)
> +{
> + struct vip_stream *stream = vb2_get_drv_priv(vb->vb2_queue);
> + struct vip_dev *dev = stream->port->dev;
> + struct vip_buffer *buf = container_of(vb, struct vip_buffer,
> + vb.vb2_buf);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&dev->slock, flags);
> + list_add_tail(&buf->list, &stream->vidq);
> + spin_unlock_irqrestore(&dev->slock, flags);
> +}
> +
> +static void return_buffers(struct vb2_queue *vq, int state)
> +{
> + struct vip_stream *stream = vb2_get_drv_priv(vq);
> + struct vip_dev *dev = stream->port->dev;
> + struct vip_buffer *buf, *node;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&dev->slock, flags);
> + list_for_each_entry_safe(buf, node, &stream->vidq, list) {
> + vb2_buffer_done(&buf->vb.vb2_buf, state);
> + list_del(&buf->list);
> + }
> + spin_unlock_irqrestore(&dev->slock, flags);
> +}
> +
> +static int vip_setup_scaler(struct vip_stream *stream)
> +{
> + struct vip_port *port = stream->port;
> + struct vip_dev *dev = port->dev;
> + struct sc_data *sc = dev->sc;
> + struct csc_data *csc = dev->csc;
> + struct vpdma_data *vpdma = dev->shared->vpdma;
> + struct vip_mmr_adb *mmr_adb = port->mmr_adb.addr;
> + int list_num = stream->list_num;
> + int timeout = 500;
> + struct v4l2_format dst_f;
> + struct v4l2_format src_f;
> +
> + memset(&src_f, 0, sizeof(src_f));
> + src_f.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> + v4l2_fill_pix_format(&src_f.fmt.pix, &port->mbus_framefmt);
> + src_f.fmt.pix.pixelformat = vip_mbus_code_to_fourcc(port->fmt->code);
> +
> + dst_f = src_f;
> + dst_f.fmt.pix.pixelformat = port->fmt->fourcc;
> + dst_f.fmt.pix.width = stream->width;
> + dst_f.fmt.pix.height = stream->height;
> +
> + /* if scaler not associated with this port then skip */
> + if (port->scaler) {
> + sc_set_hs_coeffs(sc, port->sc_coeff_h.addr,
> + port->mbus_framefmt.width,
> + port->c_rect.width);
> + sc_set_vs_coeffs(sc, port->sc_coeff_v.addr,
> + port->mbus_framefmt.height,
> + port->c_rect.height);
> + sc_config_scaler(sc, &mmr_adb->sc_regs0[0],
> + &mmr_adb->sc_regs8[0], &mmr_adb->sc_regs17[0],
> + port->mbus_framefmt.width,
> + port->mbus_framefmt.height,
> + port->c_rect.width,
> + port->c_rect.height);
> + port->load_mmrs = true;
> + }
> +
> + /* if csc not associated with this port then skip */
> + if (port->csc) {
> + csc_set_coeff(csc, &mmr_adb->csc_regs[0],
> + &src_f, &dst_f);
> +
> + port->load_mmrs = true;
> + }
> +
> + /* If coeff are already loaded then skip */
> + if (!sc->load_coeff_v && !sc->load_coeff_h && !port->load_mmrs)
> + return 0;
> +
> + if (vpdma_list_busy(vpdma, list_num)) {
> + v4l2_dbg(3, debug, stream, "%s: List %d is busy\n",
> + __func__, list_num);
> + }
> +
> + /* Make sure we start with a clean list */
> + vpdma_reset_desc_list(&stream->desc_list);
> +
> + /* config descriptors */
> + if (port->load_mmrs) {
> + vpdma_map_desc_buf(vpdma, &port->mmr_adb);
> + vpdma_add_cfd_adb(&stream->desc_list, CFD_MMR_CLIENT,
> + &port->mmr_adb);
> +
> + port->load_mmrs = false;
> + v4l2_dbg(3, debug, stream, "Added mmr_adb config desc\n");
> + }
> +
> + if (sc->loaded_coeff_h != port->sc_coeff_h.dma_addr ||
> + sc->load_coeff_h) {
> + vpdma_map_desc_buf(vpdma, &port->sc_coeff_h);
> + vpdma_add_cfd_block(&stream->desc_list,
> + VIP_SLICE1_CFD_SC_CLIENT + dev->slice_id,
> + &port->sc_coeff_h, 0);
> +
> + sc->loaded_coeff_h = port->sc_coeff_h.dma_addr;
> + sc->load_coeff_h = false;
> + v4l2_dbg(3, debug, stream, "Added sc_coeff_h config desc\n");
> + }
> +
> + if (sc->loaded_coeff_v != port->sc_coeff_v.dma_addr ||
> + sc->load_coeff_v) {
> + vpdma_map_desc_buf(vpdma, &port->sc_coeff_v);
> + vpdma_add_cfd_block(&stream->desc_list,
> + VIP_SLICE1_CFD_SC_CLIENT + dev->slice_id,
> + &port->sc_coeff_v, SC_COEF_SRAM_SIZE >> 4);
> +
> + sc->loaded_coeff_v = port->sc_coeff_v.dma_addr;
> + sc->load_coeff_v = false;
> + v4l2_dbg(3, debug, stream, "Added sc_coeff_v config desc\n");
> + }
> + v4l2_dbg(3, debug, stream, "CFD_SC_CLIENT %d slice_id: %d\n",
> + VIP_SLICE1_CFD_SC_CLIENT + dev->slice_id, dev->slice_id);
> +
> + vpdma_map_desc_buf(vpdma, &stream->desc_list.buf);
> + v4l2_dbg(3, debug, stream, "Submitting desc on list# %d\n", list_num);
> + vpdma_submit_descs(vpdma, &stream->desc_list, list_num);
> +
> + while (vpdma_list_busy(vpdma, list_num) && timeout--)
> + usleep_range(1000, 1100);
> +
> + vpdma_unmap_desc_buf(dev->shared->vpdma, &port->mmr_adb);
> + vpdma_unmap_desc_buf(dev->shared->vpdma, &port->sc_coeff_h);
> + vpdma_unmap_desc_buf(dev->shared->vpdma, &port->sc_coeff_v);
> + vpdma_unmap_desc_buf(dev->shared->vpdma, &stream->desc_list.buf);
> +
> + vpdma_reset_desc_list(&stream->desc_list);
> +
> + if (timeout <= 0) {
> + v4l2_err(stream, "Timed out setting up scaler through VPDMA list\n");
> + return -EBUSY;
> + }
> +
> + return 0;
> +}
> +
> +static int vip_load_vpdma_list_fifo(struct vip_stream *stream)
> +{
> + struct vip_port *port = stream->port;
> + struct vip_dev *dev = port->dev;
> + struct vpdma_data *vpdma = dev->shared->vpdma;
> + int list_num = stream->list_num;
> + struct vip_buffer *buf;
> + unsigned long flags;
> + int timeout, i;
> +
> + if (vpdma_list_busy(dev->shared->vpdma, stream->list_num))
> + return -EBUSY;
> +
> + for (i = 0; i < VIP_VPDMA_FIFO_SIZE; i++) {
> + spin_lock_irqsave(&dev->slock, flags);
> + if (list_empty(&stream->vidq)) {
> + v4l2_err(stream, "No buffer left!");
> + spin_unlock_irqrestore(&dev->slock, flags);
> + return -EINVAL;
> + }
> +
> + buf = list_entry(stream->vidq.next,
> + struct vip_buffer, list);
> + buf->drop = false;
> +
> + list_move_tail(&buf->list, &stream->post_bufs);
> + spin_unlock_irqrestore(&dev->slock, flags);
> +
> + v4l2_dbg(2, debug, stream, "%s: start_dma vb2 buf idx:%d\n",
> + __func__, buf->vb.vb2_buf.index);
> + start_dma(stream, buf);
> +
> + timeout = 500;
> + while (vpdma_list_busy(vpdma, list_num) && timeout--)
> + usleep_range(1000, 1100);
> +
> + if (timeout <= 0) {
> + v4l2_err(stream, "Timed out loading VPDMA list fifo\n");
> + return -EBUSY;
> + }
> + }
> + return 0;
> +}
> +
> +static int vip_start_streaming(struct vb2_queue *vq, unsigned int count)
> +{
> + struct vip_stream *stream = vb2_get_drv_priv(vq);
> + struct vip_port *port = stream->port;
> + struct vip_dev *dev = port->dev;
> + int ret;
> +
> + vip_setup_scaler(stream);
> +
> + /*
> + * Make sure the scaler is configured before the datapath is
> + * enabled. The scaler can only load the coefficient
> + * parameters when it is idle. If the scaler path is enabled
> + * and video data is being received then the VPDMA transfer will
> + * stall indefinetely.
> + */
> + set_fmt_params(stream);
> + vip_setup_parser(port);
> +
> + if (port->subdev) {
> + ret = v4l2_subdev_call(port->subdev, video, s_stream, 1);
> + if (ret) {
> + return_buffers(vq, VB2_BUF_STATE_QUEUED);
> + v4l2_dbg(1, debug, stream, "stream on failed in subdev\n");
> + return ret;
> + }
> + }
> +
> + stream->sequence = 0;
> + stream->field = V4L2_FIELD_TOP;
> + populate_desc_list(stream);
> +
> + ret = vip_load_vpdma_list_fifo(stream);
> + if (ret)
> + return ret;
> +
> + stream->num_recovery = 0;
> +
> + clear_irqs(dev, dev->slice_id, stream->list_num);
> + enable_irqs(dev, dev->slice_id, stream->list_num);
> + vip_schedule_next_buffer(stream);
> + vip_parser_stop_imm(port, false);
> + vip_enable_parser(port, true);
> +
> + return 0;
> +}
> +
> +/*
> + * Abort streaming and wait for last buffer
> + */
> +static void vip_stop_streaming(struct vb2_queue *vq)
> +{
> + struct vip_stream *stream = vb2_get_drv_priv(vq);
> + struct vip_port *port = stream->port;
> + struct vip_dev *dev = port->dev;
> + struct vip_buffer *buf;
> + int ret;
> +
> + vip_parser_stop_imm(port, true);
> + vip_enable_parser(port, false);
> + unset_fmt_params(stream);
> +
> + disable_irqs(dev, dev->slice_id, stream->list_num);
> + clear_irqs(dev, dev->slice_id, stream->list_num);
> +
> + if (port->subdev) {
> + ret = v4l2_subdev_call(port->subdev, video, s_stream, 0);
> + if (ret)
> + v4l2_dbg(1, debug, stream, "stream on failed in subdev\n");
> + }
> +
> + stop_dma(stream, true);
> +
> + /* release all active buffers */
> + while (!list_empty(&stream->post_bufs)) {
> + buf = list_entry(stream->post_bufs.next,
> + struct vip_buffer, list);
> + list_del(&buf->list);
> + if (buf->drop == 1)
> + list_add_tail(&buf->list, &stream->dropq);
> + else
> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> + }
> + while (!list_empty(&stream->vidq)) {
> + buf = list_entry(stream->vidq.next, struct vip_buffer, list);
> + list_del(&buf->list);
> + vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> + }
> +
> + if (!vb2_is_streaming(vq))
> + return;
> +
> + vpdma_unmap_desc_buf(dev->shared->vpdma, &stream->desc_list.buf);
> + vpdma_reset_desc_list(&stream->desc_list);
> +}
> +
> +static const struct vb2_ops vip_video_qops = {
> + .queue_setup = vip_queue_setup,
> + .buf_prepare = vip_buf_prepare,
> + .buf_queue = vip_buf_queue,
> + .start_streaming = vip_start_streaming,
> + .stop_streaming = vip_stop_streaming,
> + .wait_prepare = vb2_ops_wait_prepare,
> + .wait_finish = vb2_ops_wait_finish,
Drop wait_prepare/finish. This is no longer needed and these callbacks will
be removed in the near future.
> +};
> +
> +static int vip_init_dev(struct vip_dev *dev)
> +{
> + if (dev->num_ports != 0)
> + goto done;
> +
> + vip_set_clock_enable(dev, 1);
> + vip_module_toggle(dev, VIP_SC_RST, false);
> + vip_module_toggle(dev, VIP_CSC_RST, false);
> +done:
> + dev->num_ports++;
> +
> + return 0;
> +}
> +
> +static inline bool is_scaler_available(struct vip_port *port)
> +{
> + if (port->endpoint.bus_type == V4L2_MBUS_PARALLEL)
> + if (port->dev->sc_assigned == VIP_NOT_ASSIGNED ||
> + port->dev->sc_assigned == port->port_id)
> + return true;
> + return false;
> +}
> +
> +static inline bool allocate_scaler(struct vip_port *port)
> +{
> + if (is_scaler_available(port)) {
> + if (port->dev->sc_assigned == VIP_NOT_ASSIGNED ||
> + port->dev->sc_assigned == port->port_id) {
> + port->dev->sc_assigned = port->port_id;
> + port->scaler = true;
> + return true;
> + }
> + }
> + return false;
> +}
> +
> +static inline void free_scaler(struct vip_port *port)
> +{
> + if (port->dev->sc_assigned == port->port_id) {
> + port->dev->sc_assigned = VIP_NOT_ASSIGNED;
> + port->scaler = false;
> + }
> +}
> +
> +static bool is_csc_available(struct vip_port *port)
> +{
> + if (port->endpoint.bus_type == V4L2_MBUS_PARALLEL)
> + if (port->dev->csc_assigned == VIP_NOT_ASSIGNED ||
> + port->dev->csc_assigned == port->port_id)
> + return true;
> + return false;
> +}
> +
> +static bool allocate_csc(struct vip_port *port,
> + enum vip_csc_state csc_direction)
> +{
> + /* Is CSC needed? */
> + if (csc_direction != VIP_CSC_NA) {
> + if (is_csc_available(port)) {
> + port->dev->csc_assigned = port->port_id;
> + port->csc = csc_direction;
> + v4l2_dbg(1, debug, port, "%s: csc allocated: dir: %d\n",
> + __func__, csc_direction);
> + return true;
> + }
> + }
> + return false;
> +}
> +
> +static void free_csc(struct vip_port *port)
> +{
> + if (port->dev->csc_assigned == port->port_id) {
> + port->dev->csc_assigned = VIP_NOT_ASSIGNED;
> + port->csc = VIP_CSC_NA;
> + v4l2_dbg(1, debug, port, "%s: csc freed\n",
> + __func__);
> + }
> +}
> +
> +static int vip_init_port(struct vip_port *port)
> +{
> + int ret;
> + struct vip_fmt *fmt;
> + struct v4l2_subdev_format sd_fmt = {
> + .which = V4L2_SUBDEV_FORMAT_ACTIVE,
> + .pad = 0,
> + };
> + struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format;
> +
> + if (port->num_streams != 0)
> + goto done;
> +
> + ret = vip_init_dev(port->dev);
> + if (ret)
> + goto done;
> +
> + /* Get subdevice current frame format */
> + ret = v4l2_subdev_call(port->subdev, pad, get_fmt, NULL, &sd_fmt);
> + if (ret)
> + v4l2_dbg(1, debug, port, "init_port get_fmt failed in subdev: (%d)\n",
> + ret);
> +
> + /* try to find one that matches */
> + fmt = find_port_format_by_code(port, mbus_fmt->code);
> + if (!fmt) {
> + v4l2_dbg(1, debug, port, "subdev default mbus_fmt %04x is not matched.\n",
> + mbus_fmt->code);
> + /* if all else fails just pick the first one */
> + fmt = port->active_fmt[0];
> +
> + mbus_fmt->code = fmt->code;
> + sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> + sd_fmt.pad = 0;
> + ret = v4l2_subdev_call(port->subdev, pad, set_fmt,
> + NULL, &sd_fmt);
> + if (ret)
> + v4l2_dbg(1, debug, port, "init_port set_fmt failed in subdev: (%d)\n",
> + ret);
> + }
> +
> + /* Assign current format */
> + port->fmt = fmt;
> + port->mbus_framefmt = *mbus_fmt;
> +
> + v4l2_dbg(3, debug, port, "%s: g_mbus_fmt subdev mbus_code: %04X fourcc:%s size: %dx%d\n",
> + __func__, fmt->code,
> + fourcc_to_str(fmt->fourcc),
> + mbus_fmt->width, mbus_fmt->height);
> +
> + if (mbus_fmt->field == V4L2_FIELD_ALTERNATE)
> + port->flags |= FLAG_INTERLACED;
> + else
> + port->flags &= ~FLAG_INTERLACED;
> +
> + port->c_rect.left = 0;
> + port->c_rect.top = 0;
> + port->c_rect.width = mbus_fmt->width;
> + port->c_rect.height = mbus_fmt->height;
> +
> + ret = vpdma_alloc_desc_buf(&port->sc_coeff_h, SC_COEF_SRAM_SIZE);
> + if (ret != 0)
> + return ret;
> +
> + ret = vpdma_alloc_desc_buf(&port->sc_coeff_v, SC_COEF_SRAM_SIZE);
> + if (ret != 0)
> + goto free_sc_h;
> +
> + ret = vpdma_alloc_desc_buf(&port->mmr_adb, sizeof(struct vip_mmr_adb));
> + if (ret != 0)
> + goto free_sc_v;
> +
> + init_adb_hdrs(port);
> +
> + vip_enable_parser(port, false);
> +done:
> + port->num_streams++;
> + return 0;
> +
> +free_sc_v:
> + vpdma_free_desc_buf(&port->sc_coeff_v);
> +free_sc_h:
> + vpdma_free_desc_buf(&port->sc_coeff_h);
> + return ret;
> +}
> +
> +static int vip_init_stream(struct vip_stream *stream)
> +{
> + struct vip_port *port = stream->port;
> + struct vip_fmt *fmt;
> + struct v4l2_mbus_framefmt *mbus_fmt;
> + struct v4l2_format f;
> + int ret;
> +
> + ret = vip_init_port(port);
> + if (ret != 0)
> + return ret;
> +
> + fmt = port->fmt;
> + mbus_fmt = &port->mbus_framefmt;
> +
> + memset(&f, 0, sizeof(f));
> +
> + /* Properly calculate the sizeimage and bytesperline values. */
> + v4l2_fill_pix_format(&f.fmt.pix, mbus_fmt);
> + f.fmt.pix.pixelformat = fmt->fourcc;
> + ret = vip_calc_format_size(port, fmt, &f);
> + if (ret)
> + return ret;
> +
> + stream->width = f.fmt.pix.width;
> + stream->height = f.fmt.pix.height;
> + stream->sup_field = f.fmt.pix.field;
> + stream->bytesperline = f.fmt.pix.bytesperline;
> + stream->sizeimage = f.fmt.pix.sizeimage;
> +
> + v4l2_dbg(3, debug, stream, "init_stream fourcc:%s size: %dx%d bpl:%d img_size:%d\n",
> + fourcc_to_str(f.fmt.pix.pixelformat),
> + f.fmt.pix.width, f.fmt.pix.height,
> + f.fmt.pix.bytesperline, f.fmt.pix.sizeimage);
> + v4l2_dbg(3, debug, stream, "init_stream vpdma data type: 0x%02X\n",
> + port->fmt->vpdma_fmt[0]->data_type);
> +
> + ret = vpdma_create_desc_list(&stream->desc_list, VIP_DESC_LIST_SIZE,
> + VPDMA_LIST_TYPE_NORMAL);
> +
> + if (ret != 0)
> + return ret;
> +
> + stream->write_desc = (struct vpdma_dtd *)stream->desc_list.buf.addr
> + + 15;
> +
> + v4l2_dbg(1, debug, stream, "%s: stream instance %pa\n",
> + __func__, &stream);
> +
> + return 0;
> +}
> +
> +static void vip_release_dev(struct vip_dev *dev)
> +{
> + /*
> + * On last close, disable clocks to conserve power
> + */
> +
> + if (--dev->num_ports == 0) {
> + /* reset the scaler module */
> + vip_module_toggle(dev, VIP_SC_RST, true);
> + vip_module_toggle(dev, VIP_CSC_RST, true);
> + vip_set_clock_enable(dev, 0);
> + }
> +}
> +
> +static int vip_set_crop_parser(struct vip_port *port)
> +{
> + struct vip_dev *dev = port->dev;
> + struct vip_parser_data *parser = dev->parser;
> + u32 hcrop = 0, vcrop = 0;
> + u32 width = port->mbus_framefmt.width;
> +
> + if (port->fmt->vpdma_fmt[0] == &vpdma_raw_fmts[VPDMA_DATA_FMT_RAW8]) {
> + /*
> + * Special case since we are faking a YUV422 16bit format
> + * to have the vpdma perform the needed byte swap
> + * we need to adjust the pixel width accordingly
> + * otherwise the parser will attempt to collect more pixels
> + * then available and the vpdma transfer will exceed the
> + * allocated frame buffer.
> + */
> + width >>= 1;
> + v4l2_dbg(1, debug, port, "%s: 8 bit raw detected, adjusting width to %d\n",
> + __func__, width);
> + }
> +
> + /*
> + * Set Parser Crop parameters to source size otherwise
> + * scaler and colorspace converter will yield garbage.
> + */
> + hcrop = VIP_ACT_BYPASS;
> + insert_field(&hcrop, 0, VIP_ACT_SKIP_NUMPIX_MASK,
> + VIP_ACT_SKIP_NUMPIX_SHFT);
> + insert_field(&hcrop, width,
> + VIP_ACT_USE_NUMPIX_MASK, VIP_ACT_USE_NUMPIX_SHFT);
> + reg_write(parser, VIP_PARSER_CROP_H_PORT(port->port_id), hcrop);
> +
> + insert_field(&vcrop, 0, VIP_ACT_SKIP_NUMLINES_MASK,
> + VIP_ACT_SKIP_NUMLINES_SHFT);
> + insert_field(&vcrop, port->mbus_framefmt.height,
> + VIP_ACT_USE_NUMLINES_MASK, VIP_ACT_USE_NUMLINES_SHFT);
> + reg_write(parser, VIP_PARSER_CROP_V_PORT(port->port_id), vcrop);
> +
> + return 0;
> +}
> +
> +static int vip_setup_parser(struct vip_port *port)
> +{
> + struct vip_dev *dev = port->dev;
> + struct vip_parser_data *parser = dev->parser;
> + struct v4l2_fwnode_endpoint *endpoint = &port->endpoint;
> + struct vip_bt656_bus *bt656_ep = &port->bt656_endpoint;
> + int iface, sync_type;
> + u32 flags = 0, config0;
> +
> + /* Reset the port */
> + vip_reset_parser(port, true);
> + usleep_range(200, 250);
> + vip_reset_parser(port, false);
> +
> + config0 = reg_read(parser, VIP_PARSER_PORT(port->port_id));
> +
> + if (endpoint->bus_type == V4L2_MBUS_BT656) {
> + flags = endpoint->bus.parallel.flags;
> + iface = DUAL_8B_INTERFACE;
> +
> + /*
> + * Ideally, this should come from subdev
> + * port->fmt can be anything once CSC is enabled
> + */
> + if (vip_is_mbuscode_rgb(port->fmt->code)) {
> + sync_type = EMBEDDED_SYNC_SINGLE_RGB_OR_YUV444;
> + } else {
> + switch (bt656_ep->num_channels) {
> + case 4:
> + sync_type = EMBEDDED_SYNC_4X_MULTIPLEXED_YUV422;
> + break;
> + case 2:
> + sync_type = EMBEDDED_SYNC_2X_MULTIPLEXED_YUV422;
> + break;
> + case 1:
> + sync_type = EMBEDDED_SYNC_SINGLE_YUV422;
> + break;
> + default:
> + sync_type =
> + EMBEDDED_SYNC_LINE_MULTIPLEXED_YUV422;
> + }
> + if (bt656_ep->pixmux == 0)
> + sync_type =
> + EMBEDDED_SYNC_LINE_MULTIPLEXED_YUV422;
> + }
> +
> + } else if (endpoint->bus_type == V4L2_MBUS_PARALLEL) {
> + flags = endpoint->bus.parallel.flags;
> +
> + switch (endpoint->bus.parallel.bus_width) {
> + case 24:
> + iface = SINGLE_24B_INTERFACE;
> + break;
> + case 16:
> + iface = SINGLE_16B_INTERFACE;
> + break;
> + case 8:
> + default:
> + iface = DUAL_8B_INTERFACE;
> + }
> +
> + if (vip_is_mbuscode_rgb(port->fmt->code))
> + sync_type = DISCRETE_SYNC_SINGLE_RGB_24B;
> + else
> + sync_type = DISCRETE_SYNC_SINGLE_YUV422;
> +
> + if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> + config0 |= VIP_HSYNC_POLARITY;
> + else if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
> + config0 &= ~VIP_HSYNC_POLARITY;
> +
> + if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> + config0 |= VIP_VSYNC_POLARITY;
> + else if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
> + config0 &= ~VIP_VSYNC_POLARITY;
> +
> + config0 &= ~VIP_USE_ACTVID_HSYNC_ONLY;
> + config0 |= VIP_ACTVID_POLARITY;
> + config0 |= VIP_DISCRETE_BASIC_MODE;
> +
> + } else {
> + v4l2_err(port, "Device doesn't support CSI2");
> + return -EINVAL;
> + }
> +
> + if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) {
> + vip_set_pclk_invert(port);
> + config0 |= VIP_PIXCLK_EDGE_POLARITY;
> + } else {
> + config0 &= ~VIP_PIXCLK_EDGE_POLARITY;
> + }
> +
> + config0 |= ((sync_type & VIP_SYNC_TYPE_MASK) << VIP_SYNC_TYPE_SHFT);
> +
> + reg_write(parser, VIP_PARSER_PORT(port->port_id), config0);
> +
> + vip_set_data_interface(port, iface);
> + vip_set_crop_parser(port);
> +
> + return 0;
> +}
> +
> +static void vip_enable_parser(struct vip_port *port, bool on)
> +{
> + u32 config0;
> + struct vip_dev *dev = port->dev;
> + struct vip_parser_data *parser = dev->parser;
> +
> + config0 = reg_read(parser, VIP_PARSER_PORT(port->port_id));
> +
> + if (on) {
> + config0 |= VIP_PORT_ENABLE;
> + config0 &= ~(VIP_ASYNC_FIFO_RD | VIP_ASYNC_FIFO_WR);
> + } else {
> + config0 &= ~VIP_PORT_ENABLE;
> + config0 |= (VIP_ASYNC_FIFO_RD | VIP_ASYNC_FIFO_WR);
> + }
> + reg_write(parser, VIP_PARSER_PORT(port->port_id), config0);
> +}
> +
> +static void vip_reset_parser(struct vip_port *port, bool on)
> +{
> + u32 config0;
> + struct vip_dev *dev = port->dev;
> + struct vip_parser_data *parser = dev->parser;
> +
> + config0 = reg_read(parser, VIP_PARSER_PORT(port->port_id));
> +
> + if (on)
> + config0 |= VIP_SW_RESET;
> + else
> + config0 &= ~VIP_SW_RESET;
> +
> + reg_write(parser, VIP_PARSER_PORT(port->port_id), config0);
> +}
> +
> +static void vip_parser_stop_imm(struct vip_port *port, bool on)
> +{
> + u32 config0;
> + struct vip_dev *dev = port->dev;
> + struct vip_parser_data *parser = dev->parser;
> +
> + config0 = reg_read(parser, VIP_PARSER_STOP_IMM_PORT(port->port_id));
> +
> + if (on)
> + config0 = 0xffffffff;
> + else
> + config0 = 0;
> +
> + reg_write(parser, VIP_PARSER_STOP_IMM_PORT(port->port_id), config0);
> +}
> +
> +static void vip_release_stream(struct vip_stream *stream)
> +{
> + struct vip_dev *dev = stream->port->dev;
> +
> + v4l2_dbg(1, debug, stream, "%s: stream instance %pa\n",
> + __func__, &stream);
> +
> + vpdma_unmap_desc_buf(dev->shared->vpdma, &stream->desc_list.buf);
> + vpdma_free_desc_buf(&stream->desc_list.buf);
> + vpdma_free_desc_list(&stream->desc_list);
> +}
> +
> +static void vip_release_port(struct vip_port *port)
> +{
> + v4l2_dbg(1, debug, port, "%s: port instance %pa\n",
> + __func__, &port);
> +
> + vpdma_free_desc_buf(&port->mmr_adb);
> + vpdma_free_desc_buf(&port->sc_coeff_h);
> + vpdma_free_desc_buf(&port->sc_coeff_v);
> +}
> +
> +static void stop_dma(struct vip_stream *stream, bool clear_list)
> +{
> + struct vip_dev *dev = stream->port->dev;
> + int ch, size = 0;
> +
> + /* Create a list of channels to be cleared */
> + for (ch = 0; ch < VPDMA_MAX_CHANNELS; ch++) {
> + if (stream->vpdma_channels[ch] == 1) {
> + stream->vpdma_channels_to_abort[size++] = ch;
> + v4l2_dbg(2, debug, stream, "Clear channel no: %d\n", ch);
> + }
> + }
> +
> + /* Clear all the used channels for the list */
> + vpdma_list_cleanup(dev->shared->vpdma, stream->list_num,
> + stream->vpdma_channels_to_abort, size);
> +
> + if (clear_list)
> + for (ch = 0; ch < VPDMA_MAX_CHANNELS; ch++)
> + stream->vpdma_channels[ch] = 0;
> +}
> +
> +static int vip_open(struct file *file)
> +{
> + struct vip_stream *stream = video_drvdata(file);
> + struct vip_port *port = stream->port;
> + struct vip_dev *dev = port->dev;
> + int ret = 0;
> +
> + mutex_lock(&dev->mutex);
> +
> + ret = v4l2_fh_open(file);
> + if (ret) {
> + v4l2_err(stream, "v4l2_fh_open failed\n");
> + goto unlock;
> + }
> +
> + /*
> + * If this is the first open file.
> + * Then initialize hw module.
> + */
> + if (!v4l2_fh_is_singular_file(file))
> + goto unlock;
> +
> + if (vip_init_stream(stream))
> + ret = -ENODEV;
> +unlock:
> + mutex_unlock(&dev->mutex);
> + return ret;
> +}
> +
> +static int vip_release(struct file *file)
> +{
> + struct vip_stream *stream = video_drvdata(file);
> + struct vip_port *port = stream->port;
> + struct vip_dev *dev = port->dev;
> + bool fh_singular;
> + int ret;
> +
> + mutex_lock(&dev->mutex);
> +
> + /* Save the singular status before we call the clean-up helper */
> + fh_singular = v4l2_fh_is_singular_file(file);
> +
> + /* the release helper will cleanup any on-going streaming */
> + ret = _vb2_fop_release(file, NULL);
> +
> + free_csc(port);
> + free_scaler(port);
> +
> + /*
> + * If this is the last open file.
> + * Then de-initialize hw module.
> + */
> + if (fh_singular) {
> + vip_release_stream(stream);
> +
> + if (--port->num_streams == 0) {
> + vip_release_port(port);
> + vip_release_dev(port->dev);
> + }
> + }
> +
> + mutex_unlock(&dev->mutex);
> +
> + return ret;
> +}
> +
> +/*
> + * File operations
> + */
> +static const struct v4l2_file_operations vip_fops = {
> + .owner = THIS_MODULE,
> + .open = vip_open,
> + .release = vip_release,
> + .read = vb2_fop_read,
> + .poll = vb2_fop_poll,
> + .unlocked_ioctl = video_ioctl2,
> + .mmap = vb2_fop_mmap,
> +};
> +
> +static struct video_device vip_videodev = {
> + .name = VIP_MODULE_NAME,
> + .fops = &vip_fops,
> + .ioctl_ops = &vip_ioctl_ops,
> + .minor = -1,
> + .release = video_device_release,
> + .tvnorms = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM,
> + .device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE |
> + V4L2_CAP_READWRITE,
> +};
> +
> +static int alloc_stream(struct vip_port *port, int stream_id, int vfl_type)
> +{
> + struct vip_stream *stream;
> + struct vip_dev *dev = port->dev;
> + struct vb2_queue *q;
> + struct video_device *vfd;
> + struct vip_buffer *buf;
> + struct list_head *pos, *tmp;
> + int ret, i;
> + u32 vin_id;
> +
> + stream = kzalloc(sizeof(*stream), GFP_KERNEL);
> + if (!stream)
> + return -ENOMEM;
> +
> + stream->port = port;
> + stream->stream_id = stream_id;
> + stream->vfl_type = vfl_type;
> + port->cap_streams[stream_id] = stream;
> +
> + vin_id = 1 + ((dev->instance_id - 1) * 2) + dev->slice_id;
> + snprintf(stream->name, sizeof(stream->name), "vin%d%c-%d",
> + vin_id, (port->port_id == VIP_PORTA) ? 'a' : 'b', stream_id);
> +
> + stream->list_num = vpdma_hwlist_alloc(dev->shared->vpdma, stream);
> + if (stream->list_num < 0) {
> + v4l2_err(stream, "Could not get VPDMA hwlist");
> + ret = -ENODEV;
> + goto do_free_stream;
> + }
> +
> + INIT_LIST_HEAD(&stream->post_bufs);
> +
> + /*
> + * Initialize queue
> + */
> + q = &stream->vb_vidq;
> + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> + q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
> + q->drv_priv = stream;
> + q->buf_struct_size = sizeof(struct vip_buffer);
> + q->ops = &vip_video_qops;
> + q->mem_ops = &vb2_dma_contig_memops;
> + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> + q->lock = &dev->mutex;
> + q->min_reqbufs_allocation = 3;
> + q->dev = dev->v4l2_dev->dev;
> +
> + ret = vb2_queue_init(q);
> + if (ret)
> + goto do_free_hwlist;
> +
> + INIT_WORK(&stream->recovery_work, vip_overflow_recovery_work);
> +
> + INIT_LIST_HEAD(&stream->vidq);
> +
> + /* Allocate/populate Drop queue entries */
> + INIT_LIST_HEAD(&stream->dropq);
> + for (i = 0; i < VIP_DROPQ_SIZE; i++) {
> + buf = kzalloc(sizeof(*buf), GFP_ATOMIC);
> + if (!buf) {
> + ret = -ENOMEM;
> + goto do_free_dropq;
> + }
> + buf->drop = true;
> + list_add(&buf->list, &stream->dropq);
> + }
> +
> + vfd = video_device_alloc();
> + if (!vfd)
> + goto do_free_dropq;
> + *vfd = vip_videodev;
> + vfd->v4l2_dev = dev->v4l2_dev;
> + vfd->queue = q;
> +
> + vfd->lock = &dev->mutex;
> + video_set_drvdata(vfd, stream);
> + stream->vfd = vfd;
> +
> + ret = video_register_device(vfd, vfl_type, -1);
> + if (ret) {
> + v4l2_err(stream, "Failed to register video device\n");
> + goto do_free_vfd;
> + }
> +
> + v4l2_info(stream, "device registered as %s\n",
> + video_device_node_name(vfd));
> + return 0;
> +
> +do_free_vfd:
> + video_device_release(vfd);
> +do_free_dropq:
> + list_for_each_safe(pos, tmp, &stream->dropq) {
> + buf = list_entry(pos,
> + struct vip_buffer, list);
> + v4l2_dbg(1, debug, dev, "dropq buffer\n");
> + list_del(pos);
> + kfree(buf);
> + }
> +do_free_hwlist:
> + vpdma_hwlist_release(dev->shared->vpdma, stream->list_num);
> +do_free_stream:
> + kfree(stream);
> + return ret;
> +}
> +
> +static void free_stream(struct vip_stream *stream)
> +{
> + struct vip_dev *dev;
> + struct vip_buffer *buf;
> + struct list_head *pos, *q;
> +
> + if (!stream)
> + return;
> +
> + dev = stream->port->dev;
> + /* Free up the Drop queue */
> + list_for_each_safe(pos, q, &stream->dropq) {
> + buf = list_entry(pos,
> + struct vip_buffer, list);
> + v4l2_dbg(1, debug, stream, "dropq buffer\n");
> + list_del(pos);
> + kfree(buf);
> + }
> +
> + video_unregister_device(stream->vfd);
> + vpdma_hwlist_release(dev->shared->vpdma, stream->list_num);
> + stream->port->cap_streams[stream->stream_id] = NULL;
> + kfree(stream);
> +}
> +
> +static int get_subdev_active_format(struct vip_port *port,
> + struct v4l2_subdev *subdev)
> +{
> + struct vip_fmt *fmt;
> + struct v4l2_subdev_mbus_code_enum mbus_code;
> + int ret = 0;
> + unsigned int k, i, j;
> + enum vip_csc_state csc;
> +
> + /* Enumerate sub device formats and enable all matching local formats */
> + port->num_active_fmt = 0;
> + for (k = 0, i = 0; (ret != -EINVAL); k++) {
> + memset(&mbus_code, 0, sizeof(mbus_code));
> + mbus_code.index = k;
> + mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> + ret = v4l2_subdev_call(subdev, pad, enum_mbus_code,
> + NULL, &mbus_code);
> + if (ret)
> + continue;
> +
> + v4l2_dbg(2, debug, port,
> + "subdev %s: code: %04x idx: %d\n",
> + subdev->name, mbus_code.code, k);
> +
> + for (j = 0; j < ARRAY_SIZE(vip_formats); j++) {
> + fmt = &vip_formats[j];
> + if (mbus_code.code != fmt->code)
> + continue;
> +
> + /*
> + * When the port is configured for BT656
> + * then none of the downstream unit can be used.
> + * So here we need to skip all format requiring
> + * either CSC or CHR_DS
> + */
> + csc = vip_csc_direction(fmt->code, fmt->finfo);
> + if (port->endpoint.bus_type == V4L2_MBUS_BT656 &&
> + (csc != VIP_CSC_NA || fmt->coplanar))
> + continue;
> +
> + port->active_fmt[i] = fmt;
> + v4l2_dbg(2, debug, port,
> + "matched fourcc: %s: code: %04x idx: %d\n",
> + fourcc_to_str(fmt->fourcc), fmt->code, i);
> + port->num_active_fmt = ++i;
> + }
> + }
> +
> + if (i == 0) {
> + v4l2_err(port, "No suitable format reported by subdev %s\n",
> + subdev->name);
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static int alloc_port(struct vip_dev *dev, int id)
> +{
> + struct vip_port *port;
> + u32 vin_id;
> +
> + if (dev->ports[id])
> + return -EINVAL;
> +
> + port = devm_kzalloc(&dev->pdev->dev, sizeof(*port), GFP_KERNEL);
> + if (!port)
> + return -ENOMEM;
> +
> + dev->ports[id] = port;
> + port->dev = dev;
> + port->port_id = id;
> + vin_id = 1 + ((dev->instance_id - 1) * 2) + dev->slice_id;
> + snprintf(port->name, sizeof(port->name),
> + "vin%d%c", vin_id, (id == VIP_PORTA) ? 'a' : 'b');
> + port->num_streams = 0;
> + return 0;
> +}
> +
> +static void free_port(struct vip_port *port)
> +{
> + if (!port)
> + return;
> +
> + v4l2_async_nf_unregister(&port->notifier);
> + v4l2_async_nf_cleanup(&port->notifier);
> + free_stream(port->cap_streams[0]);
> +}
> +
> +static int get_field(u32 value, u32 mask, int shift)
> +{
> + return (value & (mask << shift)) >> shift;
> +}
> +
> +static int vip_probe_complete(struct platform_device *pdev);
> +static void vip_vpdma_fw_cb(struct platform_device *pdev)
> +{
> + dev_info(&pdev->dev, "VPDMA firmware loaded\n");
> +
> + if (pdev->dev.of_node)
> + vip_probe_complete(pdev);
> +}
> +
> +static int vip_create_streams(struct vip_port *port,
> + struct v4l2_subdev *subdev)
> +{
> + struct v4l2_mbus_config_parallel *bus;
> + struct vip_bt656_bus *bt656_ep;
> + int i;
> +
> + for (i = 0; i < VIP_CAP_STREAMS_PER_PORT; i++)
> + free_stream(port->cap_streams[i]);
> +
> + if (get_subdev_active_format(port, subdev))
> + return -ENODEV;
> +
> + port->subdev = subdev;
> +
> + if (port->endpoint.bus_type == V4L2_MBUS_PARALLEL) {
> + port->flags |= FLAG_MULT_PORT;
> + port->num_streams_configured = 1;
> + alloc_stream(port, 0, VFL_TYPE_VIDEO);
> + } else if (port->endpoint.bus_type == V4L2_MBUS_BT656) {
> + port->flags |= FLAG_MULT_PORT;
> + bus = &port->endpoint.bus.parallel;
> + bt656_ep = &port->bt656_endpoint;
> + port->num_streams_configured = bt656_ep->num_channels;
> + for (i = 0; i < bt656_ep->num_channels; i++) {
> + if (bt656_ep->channels[i] >= 16)
> + continue;
> + alloc_stream(port, bt656_ep->channels[i], VFL_TYPE_VIDEO);
> + }
> + }
> + return 0;
> +}
> +
> +static int vip_async_bound(struct v4l2_async_notifier *notifier,
> + struct v4l2_subdev *subdev,
> + struct v4l2_async_connection *asd)
> +{
> + struct vip_port *port = notifier_to_vip_port(notifier);
> + int ret;
> +
> + if (port->subdev) {
> + v4l2_info(port, "Rejecting subdev %s (Already set!!)",
> + subdev->name);
> + return 0;
> + }
> +
> + v4l2_info(port, "Port %c: Using subdev %s for capture\n",
> + port->port_id == VIP_PORTA ? 'A' : 'B', subdev->name);
> +
> + ret = vip_create_streams(port, subdev);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int vip_async_complete(struct v4l2_async_notifier *notifier)
> +{
> + return 0;
> +}
> +
> +static const struct v4l2_async_notifier_operations vip_async_ops = {
> + .bound = vip_async_bound,
> + .complete = vip_async_complete,
> +};
> +
> +static struct fwnode_handle *
> +fwnode_graph_get_next_endpoint_by_regs(const struct fwnode_handle *fwnode,
> + int port_reg, int reg)
> +{
> + return of_fwnode_handle(of_graph_get_endpoint_by_regs(to_of_node(fwnode),
> + port_reg, reg));
> +}
> +
> +static int vip_register_subdev_notif(struct vip_port *port,
> + struct fwnode_handle *ep)
> +{
> + struct v4l2_async_notifier *notifier = &port->notifier;
> + struct fwnode_handle *subdev;
> + struct v4l2_fwnode_endpoint *vep;
> + struct vip_bt656_bus *bt656_vep;
> + struct v4l2_async_connection *asd;
> + int ret, rval;
> +
> + vep = &port->endpoint;
> + bt656_vep = &port->bt656_endpoint;
> +
> + subdev = fwnode_graph_get_remote_port_parent(ep);
> + if (!subdev) {
> + v4l2_dbg(3, debug, port, "can't get remote parent\n");
> + return -EINVAL;
> + }
> +
> + ret = v4l2_fwnode_endpoint_parse(ep, vep);
> + if (ret) {
> + v4l2_dbg(3, debug, port, "Failed to parse endpoint:\n");
> + fwnode_handle_put(subdev);
> + return -EINVAL;
> + }
> +
> + if (vep->bus_type == V4L2_MBUS_BT656) {
> + if (fwnode_property_present(ep, "ti,vip-pixel-mux"))
> + bt656_vep->pixmux = 1;
> + else
> + bt656_vep->pixmux = 0;
> + v4l2_dbg(3, debug, port, "ti,vip-pixel-mux %u\n", bt656_vep->pixmux);
> +
> + bt656_vep->num_channels = 0;
> + rval = fwnode_property_read_u8_array(ep, "ti,vip-channels",
> + NULL, 0);
> + if (rval > 0) {
> + bt656_vep->num_channels =
> + min_t(int, ARRAY_SIZE(bt656_vep->channels),
> + rval);
> +
> + fwnode_property_read_u8_array(ep, "ti,vip-channels",
> + bt656_vep->channels,
> + bt656_vep->num_channels);
> + }
> + v4l2_dbg(3, debug, port, "ti,vip-channels %u\n", bt656_vep->num_channels);
> + }
> +
> + v4l2_async_nf_init(notifier, &port->dev->shared->v4l2_dev);
> +
> + asd = v4l2_async_nf_add_fwnode(notifier, subdev, struct v4l2_async_connection);
> + if (IS_ERR(asd)) {
> + v4l2_dbg(1, debug, port, "Error adding asd\n");
> + fwnode_handle_put(subdev);
> + v4l2_async_nf_cleanup(notifier);
> + return -EINVAL;
> + }
> +
> + notifier->ops = &vip_async_ops;
> + ret = v4l2_async_nf_register(notifier);
> + if (ret) {
> + v4l2_dbg(1, debug, port, "Error registering async notifier\n");
> + v4l2_async_nf_cleanup(notifier);
> + ret = -EINVAL;
> + }
> +
> + return ret;
> +}
> +
> +static int vip_endpoint_scan(struct platform_device *pdev)
> +{
> + struct device_node *parent = pdev->dev.of_node;
> + struct device_node *ep = NULL;
> + int count = 0, p;
> +
> + for (p = 0; p < (VIP_NUM_PORTS * VIP_NUM_SLICES); p++) {
> + ep = of_graph_get_endpoint_by_regs(parent, p, 0);
> + if (!ep)
> + continue;
> +
> + count++;
> + of_node_put(ep);
> + }
> +
> + return count;
> +}
> +
> +static int vip_probe_complete(struct platform_device *pdev)
> +{
> + struct vip_shared *shared = platform_get_drvdata(pdev);
> + struct regmap *syscon_pol = NULL;
> + u32 syscon_pol_offset = 0;
> + struct vip_port *port;
> + struct vip_dev *dev;
> + struct device_node *parent = pdev->dev.of_node;
> + struct fwnode_handle *ep = NULL;
> + int ret, slice_id, port_id, p;
> +
> + if (parent && of_property_read_bool(parent, "ti,vip-clk-polarity")) {
> + syscon_pol = syscon_regmap_lookup_by_phandle(parent,
> + "ti,vip-clk-polarity");
> + if (IS_ERR(syscon_pol)) {
> + dev_err(&pdev->dev, "failed to get ti,vip-clk-polarity regmap\n");
> + return PTR_ERR(syscon_pol);
> + }
> +
> + if (of_property_read_u32_index(parent, "ti,vip-clk-polarity",
> + 1, &syscon_pol_offset)) {
> + dev_err(&pdev->dev, "failed to get ti,vip-clk-polarity offset\n");
> + return -EINVAL;
> + }
> + }
> +
> + for (p = 0; p < (VIP_NUM_PORTS * VIP_NUM_SLICES); p++) {
> + ep = fwnode_graph_get_next_endpoint_by_regs(of_fwnode_handle(parent),
> + p, 0);
> + if (!ep)
> + continue;
> +
> + switch (p) {
> + case 0:
> + slice_id = VIP_SLICE1; port_id = VIP_PORTA;
> + break;
> + case 1:
> + slice_id = VIP_SLICE2; port_id = VIP_PORTA;
> + break;
> + case 2:
> + slice_id = VIP_SLICE1; port_id = VIP_PORTB;
> + break;
> + case 3:
> + slice_id = VIP_SLICE2; port_id = VIP_PORTB;
> + break;
> + default:
> + dev_err(&pdev->dev, "Unknown port reg=<%d>\n", p);
> + continue;
> + }
> +
> + ret = alloc_port(shared->devs[slice_id], port_id);
> + if (ret < 0)
> + continue;
> +
> + dev = shared->devs[slice_id];
> + dev->syscon_pol = syscon_pol;
> + dev->syscon_pol_offset = syscon_pol_offset;
> + port = dev->ports[port_id];
> +
> + vip_register_subdev_notif(port, ep);
> + fwnode_handle_put(ep);
> + }
> + return 0;
> +}
> +
> +static int vip_probe_slice(struct platform_device *pdev, int slice, int instance_id)
> +{
> + struct vip_shared *shared = platform_get_drvdata(pdev);
> + struct vip_dev *dev;
> + struct vip_parser_data *parser;
> + u32 vin_id;
> + int ret;
> +
> + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> + if (!dev)
> + return -ENOMEM;
> +
> + dev->instance_id = instance_id;
> + vin_id = 1 + ((dev->instance_id - 1) * 2) + slice;
> + snprintf(dev->name, sizeof(dev->name), "vin%d", vin_id);
> +
> + dev->irq = platform_get_irq(pdev, slice);
> + if (dev->irq < 0)
> + return dev->irq;
> +
> + ret = devm_request_irq(&pdev->dev, dev->irq, vip_irq,
> + 0, dev->name, dev);
> + if (ret < 0)
> + return -ENOMEM;
> +
> + spin_lock_init(&dev->slock);
> + mutex_init(&dev->mutex);
> +
> + dev->slice_id = slice;
> + dev->pdev = pdev;
> + dev->res = shared->res;
> + dev->base = shared->base;
> + dev->v4l2_dev = &shared->v4l2_dev;
> +
> + dev->shared = shared;
> + shared->devs[slice] = dev;
> +
> + vip_top_reset(dev);
> + vip_set_slice_path(dev, VIP_MULTI_CHANNEL_DATA_SELECT, 1);
> +
> + parser = devm_kzalloc(&pdev->dev, sizeof(*dev->parser), GFP_KERNEL);
> + if (!parser)
> + return PTR_ERR(parser);
> +
> + parser->res = platform_get_resource_byname(pdev,
> + IORESOURCE_MEM,
> + (slice == 0) ?
> + "parser0" :
> + "parser1");
> + parser->base = devm_ioremap_resource(&pdev->dev, parser->res);
> + if (IS_ERR(parser->base))
> + return PTR_ERR(parser->base);
> +
> + parser->pdev = pdev;
> + dev->parser = parser;
> +
> + dev->sc_assigned = VIP_NOT_ASSIGNED;
> + dev->sc = sc_create(pdev, (slice == 0) ? "sc0" : "sc1");
> + if (IS_ERR(dev->sc))
> + return PTR_ERR(dev->sc);
> +
> + dev->csc_assigned = VIP_NOT_ASSIGNED;
> + dev->csc = csc_create(pdev, (slice == 0) ? "csc0" : "csc1");
> + if (IS_ERR(dev->sc))
> + return PTR_ERR(dev->sc);
> +
> + return 0;
> +}
> +
> +static int vip_probe(struct platform_device *pdev)
> +{
> + struct vip_shared *shared;
> + struct pinctrl *pinctrl;
> + int ret, slice = VIP_SLICE1;
> + int instance_id;
> + u32 tmp, pid;
> + const char *label;
> +
> + if (!of_property_read_string(pdev->dev.of_node, "label", &label)) {
> + if (strcmp(label, "vip1") == 0)
> + instance_id = 1;
> + else if (strcmp(label, "vip2") == 0)
> + instance_id = 2;
> + else if (strcmp(label, "vip3") == 0)
> + instance_id = 3;
> + } else {
> + dev_err(&pdev->dev, "%s: VIP instance id out of range...\n",
> + __func__);
> + return -ENODEV;
> + }
> +
> + /* If there are no endpoint defined there is nothing to do */
> + if (!vip_endpoint_scan(pdev)) {
> + dev_err(&pdev->dev, "%s: No sensor", __func__);
> + return -ENODEV;
> + }
> +
> + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> + if (ret) {
> + dev_err(&pdev->dev,
> + "32-bit consistent DMA enable failed\n");
> + return ret;
> + }
> +
> + shared = devm_kzalloc(&pdev->dev, sizeof(*shared), GFP_KERNEL);
> + if (!shared)
> + return -ENOMEM;
> +
> + shared->res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vip");
> + shared->base = devm_ioremap_resource(&pdev->dev, shared->res);
> + if (IS_ERR(shared->base))
> + return PTR_ERR(shared->base);
> +
> + vip_init_format_info(&pdev->dev);
> +
> + pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
> +
> + pm_runtime_enable(&pdev->dev);
> +
> + ret = pm_runtime_get_sync(&pdev->dev);
> + if (ret)
> + goto err_runtime_disable;
> +
> + /* Make sure H/W module has the right functionality */
> + pid = reg_read(shared, VIP_PID);
> + tmp = get_field(pid, VIP_PID_FUNC_MASK, VIP_PID_FUNC_SHIFT);
> +
> + if (tmp != VIP_PID_FUNC) {
> + dev_info(&pdev->dev, "vip: unexpected PID function: 0x%x\n",
> + tmp);
> + ret = -ENODEV;
> + goto err_runtime_put;
> + }
> +
> + ret = v4l2_device_register(&pdev->dev, &shared->v4l2_dev);
> + if (ret)
> + goto err_runtime_put;
> +
> + /* enable clocks, so the firmware will load properly */
> + vip_shared_set_clock_enable(shared, 1);
> + vip_top_vpdma_reset(shared);
> +
> + platform_set_drvdata(pdev, shared);
> +
> + v4l2_ctrl_handler_init(&shared->ctrl_handler, 11);
> + shared->v4l2_dev.ctrl_handler = &shared->ctrl_handler;
> +
> + for (slice = VIP_SLICE1; slice < VIP_NUM_SLICES; slice++) {
> + ret = vip_probe_slice(pdev, slice, instance_id);
> + if (ret) {
> + dev_err(&pdev->dev, "Creating slice failed");
> + goto err_dev_unreg;
> + }
> + }
> +
> + shared->vpdma = &shared->vpdma_data;
> + ret = vpdma_create(pdev, shared->vpdma, vip_vpdma_fw_cb);
> + if (ret) {
> + dev_err(&pdev->dev, "Creating VPDMA failed");
> + goto err_dev_unreg;
> + }
> +
> + return 0;
> +
> +err_dev_unreg:
> + v4l2_ctrl_handler_free(&shared->ctrl_handler);
> + v4l2_device_unregister(&shared->v4l2_dev);
> +err_runtime_put:
> + pm_runtime_put_sync(&pdev->dev);
> +err_runtime_disable:
> + pm_runtime_disable(&pdev->dev);
> +
> + return ret;
> +}
> +
> +static void vip_remove(struct platform_device *pdev)
> +{
> + struct vip_shared *shared = platform_get_drvdata(pdev);
> + struct vip_dev *dev;
> + int slice;
> +
> + for (slice = 0; slice < VIP_NUM_SLICES; slice++) {
> + dev = shared->devs[slice];
> + if (!dev)
> + continue;
> +
> + free_port(dev->ports[VIP_PORTA]);
> + free_port(dev->ports[VIP_PORTB]);
> + }
> +
> + v4l2_ctrl_handler_free(&shared->ctrl_handler);
> +
> + pm_runtime_put_sync(&pdev->dev);
> + pm_runtime_disable(&pdev->dev);
> +}
> +
> +#if defined(CONFIG_OF)
> +static const struct of_device_id vip_of_match[] = {
> + {
> + .compatible = "ti,dra7-vip",
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, vip_of_match);
> +#endif
> +
> +static struct platform_driver vip_pdrv = {
> + .probe = vip_probe,
> + .remove = vip_remove,
> + .driver = {
> + .name = VIP_MODULE_NAME,
> + .of_match_table = of_match_ptr(vip_of_match),
> + },
> +};
> +
> +module_platform_driver(vip_pdrv);
> +
> +MODULE_DESCRIPTION("TI VIP driver");
> +MODULE_AUTHOR("Texas Instruments");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/ti/vpe/vip.h b/drivers/media/platform/ti/vpe/vip.h
> new file mode 100644
> index 000000000000..e790de0881f7
> --- /dev/null
> +++ b/drivers/media/platform/ti/vpe/vip.h
> @@ -0,0 +1,719 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * TI VIP capture driver
> + *
> + * Copyright (C) 2025 Texas Instruments Incorpated - http://www.ti.com/
> + * David Griego, <dagriego@...lakesoftware.com>
> + * Dale Farnsworth, <dale@...nsworth.org>
> + * Yemike Abhilash Chandra, <y-abhilashchandra@...com>
> + */
> +
> +#ifndef __TI_VIP_H
> +#define __TI_VIP_H
> +
> +#include <linux/videodev2.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/videobuf2-core.h>
> +#include <media/videobuf2-dma-contig.h>
> +#include <media/videobuf2-memops.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-async.h>
> +
> +#include "vpdma.h"
> +#include "vpdma_priv.h"
> +#include "sc.h"
> +#include "csc.h"
> +
> +#define VIP_INSTANCE1 1
> +#define VIP_INSTANCE2 2
> +#define VIP_INSTANCE3 3
> +
> +#define VIP_SLICE1 0
> +#define VIP_SLICE2 1
> +#define VIP_NUM_SLICES 2
> +
> +/*
> + * Additional client identifiers used for VPDMA configuration descriptors
> + */
> +#define VIP_SLICE1_CFD_SC_CLIENT 7
> +#define VIP_SLICE2_CFD_SC_CLIENT 8
> +
> +#define VIP_PORTA 0
> +#define VIP_PORTB 1
> +#define VIP_NUM_PORTS 2
> +
> +#define VIP_MAX_PLANES 2
> +#define VIP_LUMA 0
> +#define VIP_CHROMA 1
> +
> +#define VIP_CAP_STREAMS_PER_PORT 16
> +#define VIP_VBI_STREAMS_PER_PORT 16
> +
> +#define VIP_MAX_SUBDEV 5
> +/*
> + * This value needs to be at least as large as the number of entry in
> + * vip_formats[].
> + * When vip_formats[] is modified make sure to adjust this value also.
> + */
> +#define VIP_MAX_ACTIVE_FMT 16
> +/*
> + * Colorspace conversion unit can be in one of 3 modes:
> + * NA - Not Available on this port
> + * Y2R - Needed for YUV to RGB on this port
> + * R2Y - Needed for RGB to YUV on this port
> + */
> +enum vip_csc_state {
> + VIP_CSC_NA = 0,
> + VIP_CSC_Y2R,
> + VIP_CSC_R2Y,
> +};
> +
> +/* buffer for one video frame */
> +struct vip_buffer {
> + /* common v4l buffer stuff */
> + struct vb2_v4l2_buffer vb;
> + struct list_head list;
> + bool drop;
> +};
> +
> +/*
> + * struct vip_fmt - VIP media bus format information
> + * @fourcc: V4L2 pixel format FCC identifier
> + * @code: V4L2 media bus format code
> + * @colorspace: V4L2 colorspace identifier
> + * @coplanar: 1 if unpacked Luma and Chroma, 0 otherwise (packed/interleaved)
> + * @vpdma_fmt: VPDMA data format per plane.
> + * @finfo: Cache v4l2_format_info for associated fourcc
> + */
> +struct vip_fmt {
> + u32 fourcc;
> + u32 code;
> + u32 colorspace;
> + u8 coplanar;
> + const struct vpdma_data_format *vpdma_fmt[VIP_MAX_PLANES];
> + const struct v4l2_format_info *finfo;
> +};
> +
> +/*
> + * The vip_parser_data structures contains the memory mapped
> + * info to access the parser registers.
> + */
> +struct vip_parser_data {
> + void __iomem *base;
> + struct resource *res;
> +
> + struct platform_device *pdev;
> +};
> +
> +/*
> + * The vip_shared structure contains data that is shared by both
> + * the VIP1 and VIP2 slices.
> + */
> +struct vip_shared {
> + struct list_head list;
> + struct resource *res;
> + void __iomem *base;
> + struct vpdma_data vpdma_data;
> + struct vpdma_data *vpdma;
> + struct v4l2_device v4l2_dev;
> + struct vip_dev *devs[VIP_NUM_SLICES];
> + struct v4l2_ctrl_handler ctrl_handler;
> +};
> +
> +/*
> + * The vip_bt656_bus structure contains vip specific bt656 bus data.
> + */
> +struct vip_bt656_bus {
> + unsigned char num_channels;
> + unsigned char pixmux;
> + unsigned char channels[16];
> +};
> +
> +/*
> + * There are two vip_dev structure, one for each vip slice: VIP1 & VIP2.
> + */
> +struct vip_dev {
> + struct v4l2_device *v4l2_dev;
> + struct platform_device *pdev;
> + struct vip_shared *shared;
> + struct resource *res;
> + struct regmap *syscon_pol;
> + u32 syscon_pol_offset;
> + int instance_id;
> + int slice_id;
> + int num_ports; /* count of open ports */
> + struct mutex mutex;
> + /* protects access to stream buffer queues */
> + spinlock_t slock;
> +
> + int irq;
> + void __iomem *base;
> +
> + struct vip_port *ports[VIP_NUM_PORTS];
> +
> + char name[16];
> + /* parser data handle */
> + struct vip_parser_data *parser;
> + /* scaler data handle */
> + struct sc_data *sc;
> + /* scaler port assignation */
> + int sc_assigned;
> + /* csc data handle */
> + struct csc_data *csc;
> + /* csc port assignation */
> + int csc_assigned;
> +};
> +
> +/*
> + * There are two vip_port structures for each vip_dev, one for port A
> + * and one for port B.
> + */
> +struct vip_port {
> + struct vip_dev *dev;
> + int port_id;
> +
> + unsigned int flags;
> + struct v4l2_rect c_rect; /* crop rectangle */
> + struct v4l2_mbus_framefmt mbus_framefmt;
> + struct v4l2_mbus_framefmt try_mbus_framefmt;
> +
> + char name[16];
> + struct vip_fmt *fmt; /* current format info */
> + /* Number of channels/streams configured */
> + int num_streams_configured;
> + int num_streams; /* count of open streams */
> + struct vip_stream *cap_streams[VIP_CAP_STREAMS_PER_PORT];
> +
> + struct v4l2_async_notifier notifier;
> + struct v4l2_subdev *subdev;
> + struct v4l2_fwnode_endpoint endpoint;
> + struct vip_bt656_bus bt656_endpoint;
> + struct vip_fmt *active_fmt[VIP_MAX_ACTIVE_FMT];
> + int num_active_fmt;
> + /* have new shadow reg values */
> + bool load_mmrs;
> + /* shadow reg addr/data block */
> + struct vpdma_buf mmr_adb;
> + /* h coeff buffer */
> + struct vpdma_buf sc_coeff_h;
> + /* v coeff buffer */
> + struct vpdma_buf sc_coeff_v;
> + /* Show if scaler resource is available on this port */
> + bool scaler;
> + /* Show the csc resource state on this port */
> + enum vip_csc_state csc;
> +};
> +
> +/*
> + * When handling multiplexed video, there can be multiple streams for each
> + * port. The vip_stream structure holds per-stream data.
> + */
> +struct vip_stream {
> + struct video_device *vfd;
> + struct vip_port *port;
> + int stream_id;
> + int list_num;
> + int vfl_type;
> + char name[16];
> + struct work_struct recovery_work;
> + int num_recovery;
> + enum v4l2_field field; /* current field */
> + unsigned int sequence; /* current frame/field seq */
> + enum v4l2_field sup_field; /* supported field value */
> + unsigned int width; /* frame width */
> + unsigned int height; /* frame height */
> + unsigned int bytesperline; /* bytes per line in memory */
> + unsigned int sizeimage; /* image size in memory */
> + struct list_head vidq; /* incoming vip_bufs queue */
> + struct list_head dropq; /* drop vip_bufs queue */
> + struct list_head post_bufs; /* vip_bufs to be DMAed */
> + /* Maintain a list of used channels - Needed for VPDMA cleanup */
> + int vpdma_channels[VPDMA_MAX_CHANNELS];
> + int vpdma_channels_to_abort[VPDMA_MAX_CHANNELS];
> + struct vpdma_desc_list desc_list; /* DMA descriptor list */
> + struct vpdma_dtd *write_desc;
> + /* next unused desc_list addr */
> + void *desc_next;
> + struct vb2_queue vb_vidq;
> +};
> +
> +/*
> + * VIP Enumerations
> + */
> +enum data_path_select {
> + ALL_FIELDS_DATA_SELECT = 0,
> + VIP_CSC_SRC_DATA_SELECT,
> + VIP_SC_SRC_DATA_SELECT,
> + VIP_RGB_SRC_DATA_SELECT,
> + VIP_RGB_OUT_LO_DATA_SELECT,
> + VIP_RGB_OUT_HI_DATA_SELECT,
> + VIP_CHR_DS_1_SRC_DATA_SELECT,
> + VIP_CHR_DS_2_SRC_DATA_SELECT,
> + VIP_MULTI_CHANNEL_DATA_SELECT,
> + VIP_CHR_DS_1_DATA_BYPASS,
> + VIP_CHR_DS_2_DATA_BYPASS,
> +};
> +
> +enum data_interface_modes {
> + SINGLE_24B_INTERFACE = 0,
> + SINGLE_16B_INTERFACE = 1,
> + DUAL_8B_INTERFACE = 2,
> +};
> +
> +enum sync_types {
> + EMBEDDED_SYNC_SINGLE_YUV422 = 0,
> + EMBEDDED_SYNC_2X_MULTIPLEXED_YUV422 = 1,
> + EMBEDDED_SYNC_4X_MULTIPLEXED_YUV422 = 2,
> + EMBEDDED_SYNC_LINE_MULTIPLEXED_YUV422 = 3,
> + DISCRETE_SYNC_SINGLE_YUV422 = 4,
> + EMBEDDED_SYNC_SINGLE_RGB_OR_YUV444 = 5,
> + DISCRETE_SYNC_SINGLE_RGB_24B = 10,
> +};
> +
> +#define VIP_NOT_ASSIGNED -1
> +
> +/*
> + * Register offsets and field selectors
> + */
> +#define VIP_PID_FUNC 0xf02
> +
> +#define VIP_PID 0x0000
> +#define VIP_PID_MINOR_MASK 0x3f
> +#define VIP_PID_MINOR_SHIFT 0
> +#define VIP_PID_CUSTOM_MASK 0x03
> +#define VIP_PID_CUSTOM_SHIFT 6
> +#define VIP_PID_MAJOR_MASK 0x07
> +#define VIP_PID_MAJOR_SHIFT 8
> +#define VIP_PID_RTL_MASK 0x1f
> +#define VIP_PID_RTL_SHIFT 11
> +#define VIP_PID_FUNC_MASK 0xfff
> +#define VIP_PID_FUNC_SHIFT 16
> +#define VIP_PID_SCHEME_MASK 0x03
> +#define VIP_PID_SCHEME_SHIFT 30
> +
> +#define VIP_SYSCONFIG 0x0010
> +#define VIP_SYSCONFIG_IDLE_MASK 0x03
> +#define VIP_SYSCONFIG_IDLE_SHIFT 2
> +#define VIP_SYSCONFIG_STANDBY_MASK 0x03
> +#define VIP_SYSCONFIG_STANDBY_SHIFT 4
> +#define VIP_FORCE_IDLE_MODE 0
> +#define VIP_NO_IDLE_MODE 1
> +#define VIP_SMART_IDLE_MODE 2
> +#define VIP_SMART_IDLE_WAKEUP_MODE 3
> +#define VIP_FORCE_STANDBY_MODE 0
> +#define VIP_NO_STANDBY_MODE 1
> +#define VIP_SMART_STANDBY_MODE 2
> +#define VIP_SMART_STANDBY_WAKEUP_MODE 3
> +
> +#define VIP_INTC_INTX_OFFSET 0x0020
> +
> +#define VIP_INT0_STATUS0_RAW_SET 0x0020
> +#define VIP_INT0_STATUS0_RAW VIP_INT0_STATUS0_RAW_SET
> +#define VIP_INT0_STATUS0_CLR 0x0028
> +#define VIP_INT0_STATUS0 VIP_INT0_STATUS0_CLR
> +#define VIP_INT0_ENABLE0_SET 0x0030
> +#define VIP_INT0_ENABLE0 VIP_INT0_ENABLE0_SET
> +#define VIP_INT0_ENABLE0_CLR 0x0038
> +#define VIP_INT0_LIST0_COMPLETE BIT(0)
> +#define VIP_INT0_LIST0_NOTIFY BIT(1)
> +#define VIP_INT0_LIST1_COMPLETE BIT(2)
> +#define VIP_INT0_LIST1_NOTIFY BIT(3)
> +#define VIP_INT0_LIST2_COMPLETE BIT(4)
> +#define VIP_INT0_LIST2_NOTIFY BIT(5)
> +#define VIP_INT0_LIST3_COMPLETE BIT(6)
> +#define VIP_INT0_LIST3_NOTIFY BIT(7)
> +#define VIP_INT0_LIST4_COMPLETE BIT(8)
> +#define VIP_INT0_LIST4_NOTIFY BIT(9)
> +#define VIP_INT0_LIST5_COMPLETE BIT(10)
> +#define VIP_INT0_LIST5_NOTIFY BIT(11)
> +#define VIP_INT0_LIST6_COMPLETE BIT(12)
> +#define VIP_INT0_LIST6_NOTIFY BIT(13)
> +#define VIP_INT0_LIST7_COMPLETE BIT(14)
> +#define VIP_INT0_LIST7_NOTIFY BIT(15)
> +#define VIP_INT0_DESCRIPTOR BIT(16)
> +#define VIP_VIP1_PARSER_INT BIT(20)
> +#define VIP_VIP2_PARSER_INT BIT(21)
> +
> +#define VIP_INT0_STATUS1_RAW_SET 0x0024
> +#define VIP_INT0_STATUS1_RAW VIP_INT0_STATUS0_RAW_SET
> +#define VIP_INT0_STATUS1_CLR 0x002c
> +#define VIP_INT0_STATUS1 VIP_INT0_STATUS0_CLR
> +#define VIP_INT0_ENABLE1_SET 0x0034
> +#define VIP_INT0_ENABLE1 VIP_INT0_ENABLE0_SET
> +#define VIP_INT0_ENABLE1_CLR 0x003c
> +#define VIP_INT0_ENABLE1_STAT 0x004c
> +#define VIP_INT0_CHANNEL_GROUP0 BIT(0)
> +#define VIP_INT0_CHANNEL_GROUP1 BIT(1)
> +#define VIP_INT0_CHANNEL_GROUP2 BIT(2)
> +#define VIP_INT0_CHANNEL_GROUP3 BIT(3)
> +#define VIP_INT0_CHANNEL_GROUP4 BIT(4)
> +#define VIP_INT0_CHANNEL_GROUP5 BIT(5)
> +#define VIP_INT0_CLIENT BIT(7)
> +#define VIP_VIP1_DS1_UV_ERROR_INT BIT(22)
> +#define VIP_VIP1_DS2_UV_ERROR_INT BIT(23)
> +#define VIP_VIP2_DS1_UV_ERROR_INT BIT(24)
> +#define VIP_VIP2_DS2_UV_ERROR_INT BIT(25)
> +
> +#define VIP_INTC_E0I 0x00a0
> +
> +#define VIP_CLK_ENABLE 0x0100
> +#define VIP_VPDMA_CLK_ENABLE BIT(0)
> +#define VIP_VIP1_DATA_PATH_CLK_ENABLE BIT(16)
> +#define VIP_VIP2_DATA_PATH_CLK_ENABLE BIT(17)
> +
> +#define VIP_CLK_RESET 0x0104
> +#define VIP_VPDMA_RESET BIT(0)
> +#define VIP_VPDMA_CLK_RESET_MASK 0x1
> +#define VIP_VPDMA_CLK_RESET_SHIFT 0
> +#define VIP_DATA_PATH_CLK_RESET_MASK 0x1
> +#define VIP_VIP1_DATA_PATH_RESET_SHIFT 16
> +#define VIP_VIP2_DATA_PATH_RESET_SHIFT 17
> +#define VIP_VIP1_DATA_PATH_RESET BIT(16)
> +#define VIP_VIP2_DATA_PATH_RESET BIT(17)
> +#define VIP_VIP1_PARSER_RESET BIT(18)
> +#define VIP_VIP2_PARSER_RESET BIT(19)
> +#define VIP_VIP1_CSC_RESET BIT(20)
> +#define VIP_VIP2_CSC_RESET BIT(21)
> +#define VIP_VIP1_SC_RESET BIT(22)
> +#define VIP_VIP2_SC_RESET BIT(23)
> +#define VIP_VIP1_DS1_RESET BIT(25)
> +#define VIP_VIP2_DS1_RESET BIT(26)
> +#define VIP_VIP1_DS2_RESET BIT(27)
> +#define VIP_VIP2_DS2_RESET BIT(28)
> +#define VIP_MAIN_RESET BIT(31)
> +
> +#define VIP_VIP1_DATA_PATH_SELECT 0x010c
> +#define VIP_VIP2_DATA_PATH_SELECT 0x0110
> +#define VIP_CSC_SRC_SELECT_MASK 0x07
> +#define VIP_CSC_SRC_SELECT_SHFT 0
> +#define VIP_SC_SRC_SELECT_MASK 0x07
> +#define VIP_SC_SRC_SELECT_SHFT 3
> +#define VIP_RGB_SRC_SELECT BIT(6)
> +#define VIP_RGB_OUT_LO_SRC_SELECT BIT(7)
> +#define VIP_RGB_OUT_HI_SRC_SELECT BIT(8)
> +#define VIP_DS1_SRC_SELECT_MASK 0x07
> +#define VIP_DS1_SRC_SELECT_SHFT 9
> +#define VIP_DS2_SRC_SELECT_MASK 0x07
> +#define VIP_DS2_SRC_SELECT_SHFT 12
> +#define VIP_MULTI_CHANNEL_SELECT BIT(15)
> +#define VIP_DS1_BYPASS BIT(16)
> +#define VIP_DS2_BYPASS BIT(17)
> +#define VIP_TESTPORT_B_SELECT BIT(26)
> +#define VIP_TESTPORT_A_SELECT BIT(27)
> +#define VIP_DATAPATH_SELECT_MASK 0x0f
> +#define VIP_DATAPATH_SELECT_SHFT 28
> +
> +#define VIP1_PARSER_REG_OFFSET 0x5500
> +#define VIP2_PARSER_REG_OFFSET 0x5a00
> +
> +#define VIP_PARSER_MAIN_CFG 0x0000
> +#define VIP_DATA_INTERFACE_MODE_MASK 0x03
> +#define VIP_DATA_INTERFACE_MODE_SHFT 0
> +#define VIP_CLIP_BLANK BIT(4)
> +#define VIP_CLIP_ACTIVE BIT(5)
> +
> +#define VIP_PARSER_PORTA_0 0x0004
> +#define VIP_PARSER_PORTB_0 0x000c
> +#define VIP_SYNC_TYPE_MASK 0x0f
> +#define VIP_SYNC_TYPE_SHFT 0
> +#define VIP_CTRL_CHANNEL_SEL_MASK 0x03
> +#define VIP_CTRL_CHANNEL_SEL_SHFT 4
> +#define VIP_ASYNC_FIFO_WR BIT(6)
> +#define VIP_ASYNC_FIFO_RD BIT(7)
> +#define VIP_PORT_ENABLE BIT(8)
> +#define VIP_FID_POLARITY BIT(9)
> +#define VIP_PIXCLK_EDGE_POLARITY BIT(10)
> +#define VIP_HSYNC_POLARITY BIT(11)
> +#define VIP_VSYNC_POLARITY BIT(12)
> +#define VIP_ACTVID_POLARITY BIT(13)
> +#define VIP_FID_DETECT_MODE BIT(14)
> +#define VIP_USE_ACTVID_HSYNC_ONLY BIT(15)
> +#define VIP_FID_SKEW_PRECOUNT_MASK 0x3f
> +#define VIP_FID_SKEW_PRECOUNT_SHFT 16
> +#define VIP_DISCRETE_BASIC_MODE BIT(22)
> +#define VIP_SW_RESET BIT(23)
> +#define VIP_FID_SKEW_POSTCOUNT_MASK 0x3f
> +#define VIP_FID_SKEW_POSTCOUNT_SHFT 24
> +#define VIP_ANALYZER_2X4X_SRCNUM_POS BIT(30)
> +#define VIP_ANALYZER_FVH_ERR_COR_EN BIT(31)
> +
> +#define VIP_PARSER_PORTA_1 0x0008
> +#define VIP_PARSER_PORTB_1 0x0010
> +#define VIP_SRC0_NUMLINES_MASK 0x0fff
> +#define VIP_SRC0_NUMLINES_SHFT 0
> +#define VIP_ANC_CHAN_SEL_8B_MASK 0x03
> +#define VIP_ANC_CHAN_SEL_8B_SHFT 13
> +#define VIP_SRC0_NUMPIX_MASK 0x0fff
> +#define VIP_SRC0_NUMPIX_SHFT 16
> +#define VIP_REPACK_SEL_MASK 0x07
> +#define VIP_REPACK_SEL_SHFT 28
> +
> +#define VIP_PARSER_FIQ_MASK 0x0014
> +#define VIP_PARSER_FIQ_CLR 0x0018
> +#define VIP_PARSER_FIQ_STATUS 0x001c
> +#define VIP_PORTA_VDET BIT(0)
> +#define VIP_PORTB_VDET BIT(1)
> +#define VIP_PORTA_ASYNC_FIFO_OF BIT(2)
> +#define VIP_PORTB_ASYNC_FIFO_OF BIT(3)
> +#define VIP_PORTA_OUTPUT_FIFO_YUV BIT(4)
> +#define VIP_PORTA_OUTPUT_FIFO_ANC BIT(6)
> +#define VIP_PORTB_OUTPUT_FIFO_YUV BIT(7)
> +#define VIP_PORTB_OUTPUT_FIFO_ANC BIT(9)
> +#define VIP_PORTA_CONN BIT(10)
> +#define VIP_PORTA_DISCONN BIT(11)
> +#define VIP_PORTB_CONN BIT(12)
> +#define VIP_PORTB_DISCONN BIT(13)
> +#define VIP_PORTA_SRC0_SIZE BIT(14)
> +#define VIP_PORTB_SRC0_SIZE BIT(15)
> +#define VIP_PORTA_YUV_PROTO_VIOLATION BIT(16)
> +#define VIP_PORTA_ANC_PROTO_VIOLATION BIT(17)
> +#define VIP_PORTB_YUV_PROTO_VIOLATION BIT(18)
> +#define VIP_PORTB_ANC_PROTO_VIOLATION BIT(19)
> +#define VIP_PORTA_CFG_DISABLE_COMPLETE BIT(20)
> +#define VIP_PORTB_CFG_DISABLE_COMPLETE BIT(21)
> +
> +#define VIP_PARSER_PORTA_SOURCE_FID 0x0020
> +#define VIP_PARSER_PORTA_ENCODER_FID 0x0024
> +#define VIP_PARSER_PORTB_SOURCE_FID 0x0028
> +#define VIP_PARSER_PORTB_ENCODER_FID 0x002c
> +
> +#define VIP_PARSER_PORTA_SRC0_SIZE 0x0030
> +#define VIP_PARSER_PORTB_SRC0_SIZE 0x0070
> +#define VIP_SOURCE_HEIGHT_MASK 0x0fff
> +#define VIP_SOURCE_HEIGHT_SHFT 0
> +#define VIP_SOURCE_WIDTH_MASK 0x0fff
> +#define VIP_SOURCE_WIDTH_SHFT 16
> +
> +#define VIP_PARSER_PORTA_VDET_VEC 0x00b0
> +#define VIP_PARSER_PORTB_VDET_VEC 0x00b4
> +
> +#define VIP_PARSER_PORTA_EXTRA2 0x00b8
> +#define VIP_PARSER_PORTB_EXTRA2 0x00c8
> +#define VIP_ANC_SKIP_NUMPIX_MASK 0x0fff
> +#define VIP_ANC_SKIP_NUMPIX_SHFT 0
> +#define VIP_ANC_BYPASS BIT(15)
> +#define VIP_ANC_USE_NUMPIX_MASK 0x0fff
> +#define VIP_ANC_USE_NUMPIX_SHFT 16
> +#define VIP_ANC_TARGET_SRCNUM_MASK 0x0f
> +#define VIP_ANC_TARGET_SRCNUM_SHFT 28
> +
> +#define VIP_PARSER_PORTA_EXTRA3 0x00bc
> +#define VIP_PARSER_PORTB_EXTRA3 0x00cc
> +#define VIP_ANC_SKIP_NUMLINES_MASK 0x0fff
> +#define VIP_ANC_SKIP_NUMLINES_SHFT 0
> +#define VIP_ANC_USE_NUMLINES_MASK 0x0fff
> +#define VIP_ANC_USE_NUMLINES_SHFT 16
> +
> +#define VIP_PARSER_PORTA_EXTRA4 0x00c0
> +#define VIP_PARSER_PORTB_EXTRA4 0x00d0
> +#define VIP_ACT_SKIP_NUMPIX_MASK 0x0fff
> +#define VIP_ACT_SKIP_NUMPIX_SHFT 0
> +#define VIP_ACT_BYPASS BIT(15)
> +#define VIP_ACT_USE_NUMPIX_MASK 0x0fff
> +#define VIP_ACT_USE_NUMPIX_SHFT 16
> +#define VIP_ACT_TARGET_SRCNUM_MASK 0x0f
> +#define VIP_ACT_TARGET_SRCNUM_SHFT 28
> +
> +#define VIP_PARSER_PORTA_EXTRA5 0x00c4
> +#define VIP_PARSER_PORTB_EXTRA5 0x00d4
> +#define VIP_ACT_SKIP_NUMLINES_MASK 0x0fff
> +#define VIP_ACT_SKIP_NUMLINES_SHFT 0
> +#define VIP_ACT_USE_NUMLINES_MASK 0x0fff
> +#define VIP_ACT_USE_NUMLINES_SHFT 16
> +
> +#define VIP_PARSER_PORTA_EXTRA6 0x00d8
> +#define VIP_PARSER_PORTB_EXTRA6 0x00dc
> +#define VIP_ANC_SRCNUM_STOP_IMM_SHFT 0
> +#define VIP_YUV_SRCNUM_STOP_IMM_SHFT 16
> +
> +#define VIP_CSC_CSC00 0x0200
> +#define VIP_CSC_A0_MASK 0x1fff
> +#define VIP_CSC_A0_SHFT 0
> +#define VIP_CSC_B0_MASK 0x1fff
> +#define VIP_CSC_B0_SHFT 16
> +
> +#define VIP_CSC_CSC01 0x0204
> +#define VIP_CSC_C0_MASK 0x1fff
> +#define VIP_CSC_C0_SHFT 0
> +#define VIP_CSC_A1_MASK 0x1fff
> +#define VIP_CSC_A1_SHFT 16
> +
> +#define VIP_CSC_CSC02 0x0208
> +#define VIP_CSC_B1_MASK 0x1fff
> +#define VIP_CSC_B1_SHFT 0
> +#define VIP_CSC_C1_MASK 0x1fff
> +#define VIP_CSC_C1_SHFT 16
> +
> +#define VIP_CSC_CSC03 0x020c
> +#define VIP_CSC_A2_MASK 0x1fff
> +#define VIP_CSC_A2_SHFT 0
> +#define VIP_CSC_B2_MASK 0x1fff
> +#define VIP_CSC_B2_SHFT 16
> +
> +#define VIP_CSC_CSC04 0x0210
> +#define VIP_CSC_C2_MASK 0x1fff
> +#define VIP_CSC_C2_SHFT 0
> +#define VIP_CSC_D0_MASK 0x0fff
> +#define VIP_CSC_D0_SHFT 16
> +
> +#define VIP_CSC_CSC05 0x0214
> +#define VIP_CSC_D1_MASK 0x0fff
> +#define VIP_CSC_D1_SHFT 0
> +#define VIP_CSC_D2_MASK 0x0fff
> +#define VIP_CSC_D2_SHFT 16
> +#define VIP_CSC_BYPASS BIT(28)
> +
> +#define VIP_SC_MP_SC0 0x0300
> +#define VIP_INTERLACE_O BIT(0)
> +#define VIP_LINEAR BIT(1)
> +#define VIP_SC_BYPASS BIT(2)
> +#define VIP_INVT_FID BIT(3)
> +#define VIP_USE_RAV BIT(4)
> +#define VIP_ENABLE_EV BIT(5)
> +#define VIP_AUTH_HS BIT(6)
> +#define VIP_DCM_2X BIT(7)
> +#define VIP_DCM_4X BIT(8)
> +#define VIP_HP_BYPASS BIT(9)
> +#define VIP_INTERLACE_I BIT(10)
> +#define VIP_ENABLE_SIN2_VER_INTP BIT(11)
> +#define VIP_Y_PK_EN BIT(14)
> +#define VIP_TRIM BIT(15)
> +#define VIP_SELFGEN_FID BIT(16)
> +
> +#define VIP_SC_MP_SC1 0x0304
> +#define VIP_ROW_ACC_INC_MASK 0x07ffffff
> +#define VIP_ROW_ACC_INC_SHFT 0
> +
> +#define VIP_SC_MP_SC2 0x0308
> +#define VIP_ROW_ACC_OFFSET_MASK 0x0fffffff
> +#define VIP_ROW_ACC_OFFSET_SHFT 0
> +
> +#define VIP_SC_MP_SC3 0x030c
> +#define VIP_ROW_ACC_OFFSET_B_MASK 0x0fffffff
> +#define VIP_ROW_ACC_OFFSET_B_SHFT 0
> +
> +#define VIP_SC_MP_SC4 0x0310
> +#define VIP_TAR_H_MASK 0x07ff
> +#define VIP_TAR_H_SHFT 0
> +#define VIP_TAR_W_MASK 0x07ff
> +#define VIP_TAR_W_SHFT 12
> +#define VIP_LIN_ACC_INC_U_MASK 0x07
> +#define VIP_LIN_ACC_INC_U_SHFT 24
> +#define VIP_NLIN_ACC_INIT_U_MASK 0x07
> +#define VIP_NLIN_ACC_INIT_U_SHFT 28
> +
> +#define VIP_SC_MP_SC5 0x0314
> +#define VIP_SRC_H_MASK 0x03ff
> +#define VIP_SRC_H_SHFT 0
> +#define VIP_SRC_W_MASK 0x07ff
> +#define VIP_SRC_W_SHFT 12
> +#define VIP_NLIN_ACC_INC_U_MASK 0x07
> +#define VIP_NLIN_ACC_INC_U_SHFT 24
> +
> +#define VIP_SC_MP_SC6 0x0318
> +#define VIP_ROW_ACC_INIT_RAV_MASK 0x03ff
> +#define VIP_ROW_ACC_INIT_RAV_SHFT 0
> +#define VIP_ROW_ACC_INIT_RAV_B_MASK 0x03ff
> +#define VIP_ROW_ACC_INIT_RAV_B_SHFT 10
> +
> +#define VIP_SC_MP_SC8 0x0320
> +#define VIP_NLIN_LEFT_MASK 0x07ff
> +#define VIP_NLIN_LEFT_SHFT 0
> +#define VIP_NLIN_RIGHT_MASK 0x07ff
> +#define VIP_NLIN_RIGHT_SHFT 12
> +
> +#define VIP_SC_MP_SC9 0x0324
> +#define VIP_LIN_ACC_INC VIP_SC_MP_SC9
> +
> +#define VIP_SC_MP_SC10 0x0328
> +#define VIP_NLIN_ACC_INIT VIP_SC_MP_SC10
> +
> +#define VIP_SC_MP_SC11 0x032c
> +#define VIP_NLIN_ACC_INC VIP_SC_MP_SC11
> +
> +#define VIP_SC_MP_SC12 0x0330
> +#define VIP_COL_ACC_OFFSET_MASK 0x01ffffff
> +#define VIP_COL_ACC_OFFSET_SHFT 0
> +
> +#define VIP_SC_MP_SC13 0x0334
> +#define VIP_SC_FACTOR_RAV_MASK 0x03ff
> +#define VIP_SC_FACTOR_RAV_SHFT 0
> +#define VIP_CHROMA_INTP_THR_MASK 0x03ff
> +#define VIP_CHROMA_INTP_THR_SHFT 12
> +#define VIP_DELTA_CHROMA_THR_MASK 0x0f
> +#define VIP_DELTA_CHROMA_THR_SHFT 24
> +
> +#define VIP_SC_MP_SC17 0x0344
> +#define VIP_EV_THR_MASK 0x03ff
> +#define VIP_EV_THR_SHFT 12
> +#define VIP_DELTA_LUMA_THR_MASK 0x0f
> +#define VIP_DELTA_LUMA_THR_SHFT 24
> +#define VIP_DELTA_EV_THR_MASK 0x0f
> +#define VIP_DELTA_EV_THR_SHFT 28
> +
> +#define VIP_SC_MP_SC18 0x0348
> +#define VIP_HS_FACTOR_MASK 0x03ff
> +#define VIP_HS_FACTOR_SHFT 0
> +#define VIP_CONF_DEFAULT_MASK 0x01ff
> +#define VIP_CONF_DEFAULT_SHFT 16
> +
> +#define VIP_SC_MP_SC19 0x034c
> +#define VIP_HPF_COEFF0_MASK 0xff
> +#define VIP_HPF_COEFF0_SHFT 0
> +#define VIP_HPF_COEFF1_MASK 0xff
> +#define VIP_HPF_COEFF1_SHFT 8
> +#define VIP_HPF_COEFF2_MASK 0xff
> +#define VIP_HPF_COEFF2_SHFT 16
> +#define VIP_HPF_COEFF3_MASK 0xff
> +#define VIP_HPF_COEFF3_SHFT 23
> +
> +#define VIP_SC_MP_SC20 0x0350
> +#define VIP_HPF_COEFF4_MASK 0xff
> +#define VIP_HPF_COEFF4_SHFT 0
> +#define VIP_HPF_COEFF5_MASK 0xff
> +#define VIP_HPF_COEFF5_SHFT 8
> +#define VIP_HPF_NORM_SHFT_MASK 0x07
> +#define VIP_HPF_NORM_SHFT_SHFT 16
> +#define VIP_NL_LIMIT_MASK 0x1ff
> +#define VIP_NL_LIMIT_SHFT 20
> +
> +#define VIP_SC_MP_SC21 0x0354
> +#define VIP_NL_LO_THR_MASK 0x01ff
> +#define VIP_NL_LO_THR_SHFT 0
> +#define VIP_NL_LO_SLOPE_MASK 0xff
> +#define VIP_NL_LO_SLOPE_SHFT 16
> +
> +#define VIP_SC_MP_SC22 0x0358
> +#define VIP_NL_HI_THR_MASK 0x01ff
> +#define VIP_NL_HI_THR_SHFT 0
> +#define VIP_NL_HI_SLOPE_SH_MASK 0x07
> +#define VIP_NL_HI_SLOPE_SH_SHFT 16
> +
> +#define VIP_SC_MP_SC23 0x035c
> +#define VIP_GRADIENT_THR_MASK 0x07ff
> +#define VIP_GRADIENT_THR_SHFT 0
> +#define VIP_GRADIENT_THR_RANGE_MASK 0x0f
> +#define VIP_GRADIENT_THR_RANGE_SHFT 12
> +#define VIP_MIN_GY_THR_MASK 0xff
> +#define VIP_MIN_GY_THR_SHFT 16
> +#define VIP_MIN_GY_THR_RANGE_MASK 0x0f
> +#define VIP_MIN_GY_THR_RANGE_SHFT 28
> +
> +#define VIP_SC_MP_SC24 0x0360
> +#define VIP_ORG_H_MASK 0x07ff
> +#define VIP_ORG_H_SHFT 0
> +#define VIP_ORG_W_MASK 0x07ff
> +#define VIP_ORG_W_SHFT 16
> +
> +#define VIP_SC_MP_SC25 0x0364
> +#define VIP_OFF_H_MASK 0x07ff
> +#define VIP_OFF_H_SHFT 0
> +#define VIP_OFF_W_MASK 0x07ff
> +#define VIP_OFF_W_SHFT 16
> +
> +#define VIP_VPDMA_REG_OFFSET 0xd000
> +
> +#endif
Regards,
Hans
Powered by blists - more mailing lists