linux-kernel - [PATCH v2 1/5] drm/rockchip: vop2: Check bpc before switching DCLK source

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250825-rk3588-10bpc-v2-1-955622d16985@collabora.com>
Date: Mon, 25 Aug 2025 13:08:32 +0300
From: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
To: Sandy Huang <hjc@...k-chips.com>, 
 Heiko Stübner <heiko@...ech.de>, 
 Andy Yan <andy.yan@...k-chips.com>, 
 Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, 
 Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>, 
 David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>, 
 Andrzej Hajda <andrzej.hajda@...el.com>, 
 Neil Armstrong <neil.armstrong@...aro.org>, Robert Foss <rfoss@...nel.org>, 
 Laurent Pinchart <Laurent.pinchart@...asonboard.com>, 
 Jonas Karlman <jonas@...boo.se>, Jernej Skrabec <jernej.skrabec@...il.com>
Cc: kernel@...labora.com, dri-devel@...ts.freedesktop.org, 
 linux-arm-kernel@...ts.infradead.org, linux-rockchip@...ts.infradead.org, 
 linux-kernel@...r.kernel.org
Subject: [PATCH v2 1/5] drm/rockchip: vop2: Check bpc before switching DCLK
 source

When making use of the HDMI PHY PLL as a VOP2 DCLK source, it's output
rate does normally match the mode clock.  But this is only applicable
for default color depth of 8 bpc.  For higher depths, the output clock
is further divided by the hardware according to the formula:

  output rate = PHY PLL rate * 8 / bpc

Hence there is no need for VOP2 to compensate for bpc when adjusting
DCLK, but it is required to do so when computing its maximum operating
frequency.

Take color depth into consideration before deciding to switch DCLK
source.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 60 +++++++++++++++++-----------
 1 file changed, 36 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
index b50927a824b4020a7ffd57974070ed202cd8b838..977ccbf163448bc1a0423b8af707e9b2cf9b4be6 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
@@ -101,7 +101,7 @@ enum vop2_afbc_format {
 	VOP2_AFBC_FMT_INVALID = -1,
 };
 
-#define VOP2_MAX_DCLK_RATE		600000000
+#define VOP2_MAX_DCLK_RATE		600000000UL
 
 /*
  * bus-format types.
@@ -1737,36 +1737,48 @@ static void vop2_crtc_atomic_enable(struct drm_crtc *crtc,
 	 * Switch to HDMI PHY PLL as DCLK source for display modes up
 	 * to 4K@...z, if available, otherwise keep using the system CRU.
 	 */
-	if ((vop2->pll_hdmiphy0 || vop2->pll_hdmiphy1) && clock <= VOP2_MAX_DCLK_RATE) {
-		drm_for_each_encoder_mask(encoder, crtc->dev, crtc_state->encoder_mask) {
-			struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder);
+	if (vop2->pll_hdmiphy0 || vop2->pll_hdmiphy1) {
+		unsigned long max_dclk;
 
-			if (rkencoder->crtc_endpoint_id == ROCKCHIP_VOP2_EP_HDMI0) {
-				if (!vop2->pll_hdmiphy0)
-					break;
+		if (vcstate->output_bpc > 8)
+			max_dclk = DIV_ROUND_CLOSEST_ULL(VOP2_MAX_DCLK_RATE * 8,
+							 vcstate->output_bpc);
+		else
+			max_dclk = VOP2_MAX_DCLK_RATE;
 
-				if (!vp->dclk_src)
-					vp->dclk_src = clk_get_parent(vp->dclk);
+		if (clock <= max_dclk) {
+			drm_for_each_encoder_mask(encoder, crtc->dev, crtc_state->encoder_mask) {
+				struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder);
 
-				ret = clk_set_parent(vp->dclk, vop2->pll_hdmiphy0);
-				if (ret < 0)
-					drm_warn(vop2->drm,
-						 "Could not switch to HDMI0 PHY PLL: %d\n", ret);
-				break;
-			}
+				if (rkencoder->crtc_endpoint_id == ROCKCHIP_VOP2_EP_HDMI0) {
+					if (!vop2->pll_hdmiphy0)
+						break;
+
+					if (!vp->dclk_src)
+						vp->dclk_src = clk_get_parent(vp->dclk);
 
-			if (rkencoder->crtc_endpoint_id == ROCKCHIP_VOP2_EP_HDMI1) {
-				if (!vop2->pll_hdmiphy1)
+					ret = clk_set_parent(vp->dclk, vop2->pll_hdmiphy0);
+					if (ret < 0)
+						drm_warn(vop2->drm,
+							 "Could not switch to HDMI0 PHY PLL: %d\n",
+							 ret);
 					break;
+				}
 
-				if (!vp->dclk_src)
-					vp->dclk_src = clk_get_parent(vp->dclk);
+				if (rkencoder->crtc_endpoint_id == ROCKCHIP_VOP2_EP_HDMI1) {
+					if (!vop2->pll_hdmiphy1)
+						break;
 
-				ret = clk_set_parent(vp->dclk, vop2->pll_hdmiphy1);
-				if (ret < 0)
-					drm_warn(vop2->drm,
-						 "Could not switch to HDMI1 PHY PLL: %d\n", ret);
-				break;
+					if (!vp->dclk_src)
+						vp->dclk_src = clk_get_parent(vp->dclk);
+
+					ret = clk_set_parent(vp->dclk, vop2->pll_hdmiphy1);
+					if (ret < 0)
+						drm_warn(vop2->drm,
+							 "Could not switch to HDMI1 PHY PLL: %d\n",
+							 ret);
+					break;
+				}
 			}
 		}
 	}

-- 
2.50.1