[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <3bdc9ef0-d5a6-4836-b3b1-c0114aa330f6@ti.com>
Date: Tue, 26 Aug 2025 14:19:57 +0530
From: Yemike Abhilash Chandra <y-abhilashchandra@...com>
To: Hans Verkuil <hverkuil+cisco@...nel.org>, <mchehab@...nel.org>,
<robh@...nel.org>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <linux@...linux.org.uk>, <ardb@...nel.org>, <ebiggers@...nel.org>,
<geert+renesas@...der.be>, <claudiu.beznea@...on.dev>,
<bparrot@...com>, <andre.draszik@...aro.org>,
<kuninori.morimoto.gx@...esas.com>,
<prabhakar.mahadev-lad.rj@...renesas.com>,
<heikki.krogerus@...ux.intel.com>, <kory.maincent@...tlin.com>,
<florian.fainelli@...adcom.com>, <lumag@...nel.org>,
<dale@...nsworth.org>, <sbellary@...libre.com>,
<linux-media@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<dagriego@...lakesoftware.com>, <u-kumar1@...com>
Subject: Re: [PATCH V2 0/4] Add support for VIP
Hi Hans,
Thanks for the review.
On 25/08/25 20:04, Hans Verkuil wrote:
> Hi Yemike,
>
> On 16/07/2025 13:19, Yemike Abhilash Chandra wrote:
>> This patch series add support for the TI VIP video capture engine.
>> VIP stands for Video Input Port, it can be found on devices such as
>> DRA7xx and provides a parallel interface to a video source such as
>> a sensor or TV decoder.
>>
>> Each VIP can support two inputs (slices) and a SoC can be configured
>> with a variable number of VIP's. Each slice can support two ports
>> each connected to its own sub-device.
>>
>> The first patch in this series updates the outdated MAINTAINERS entry
>> for the TI VPE and CAL drivers. The subsequent three patches introduce
>> support for the TI VIP (Video Input Port) driver.
>
> I'll pick up the MAINTAINERS patch, but the others need more work, so
> v3 is needed for that.
>
Thanks, I am working on v3. I plan to incorporate the additional
feedback you provided on the driver before submitting the v3.
>>
>> Link for v1: https://lore.kernel.org/all/20200522225412.29440-1-bparrot@ti.com/
>> The v1 patch series was posted in the year 2020. This v2 series resumes the
>> effort to upstream VIP support by addressing all previous review comments
>>
>> Changelog:
>> Changes in v2:
>> - Remove array and just use hsync: true in bindings (Patch 3/5)
>> - Remove array and use enum for bus width in bindings (Patch 3/5)
>> - Use pattern properties since properties across ports are same (Patch 3/5)
>> - Remove vip_dbg, vip_info, vip_err aliases and just use v4l2_dbg, v4l2_info
>> and v4l2_err instead (Patch 4/5)
>> - Remove color space information from vip_formats struct (Patch 4/5)
>> - Use g_std instead of g_std_output (Patch 4/5)
>> - Do not touch pix.priv (Patch 4/5)
>> - Remove all comments with just register values (Patch 4/5)
>> - Remove support for vidioc_default ioctl (Patch 4/5)
>> - In case of any error while streaming, push all pending buffers to vb2 (Patch 4/5)
>> - Address some minor comments made by Hans throughout the driver (Patch 4/5)
>> - Update copyright year at various places
>>
>> v4l2-compliance output: https://gist.github.com/Yemike-Abhilash-Chandra/b0791cb465fadc11d4c995197cb22f29
>
> Also run v4l2-compliance with the -s option to check compliance while streaming.
>
Thanks for pointing this out. Will run as part of v3.
Thanks and Regards,
Yemike Abhilash Chandra
> Regards,
>
> Hans
>
>>
>> v4l2-compliance cropping and composing tests are failing likely
>> due to OV10635 sensor supporting several discrete frame sizes,
>> fail: v4l2-test-formats.cpp(1560): node->frmsizes_count[pixfmt] > 1
>>
>> Test logs: https://gist.github.com/Yemike-Abhilash-Chandra/98504ab56416aef38b851036aef5eeb1
>>
>> Dale Farnsworth (2):
>> dt-bindings: media: ti: vpe: Add bindings for Video Input Port
>> media: ti-vpe: Add the VIP driver
>>
>> Yemike Abhilash Chandra (2):
>> MAINTAINERS: Update maintainers of TI VPE and CAL
>> Revert "media: platform: ti: Remove unused vpdma_update_dma_addr"
>>
>> .../devicetree/bindings/media/ti,vip.yaml | 211 +
>> MAINTAINERS | 3 +-
>> drivers/media/platform/ti/Kconfig | 13 +
>> drivers/media/platform/ti/vpe/Makefile | 2 +
>> drivers/media/platform/ti/vpe/vip.c | 3824 +++++++++++++++++
>> drivers/media/platform/ti/vpe/vip.h | 719 ++++
>> drivers/media/platform/ti/vpe/vpdma.c | 32 +
>> drivers/media/platform/ti/vpe/vpdma.h | 3 +
>> 8 files changed, 4806 insertions(+), 1 deletion(-)
>> create mode 100644 Documentation/devicetree/bindings/media/ti,vip.yaml
>> create mode 100644 drivers/media/platform/ti/vpe/vip.c
>> create mode 100644 drivers/media/platform/ti/vpe/vip.h
>>
>
Powered by blists - more mailing lists