linux-kernel - [PATCH 5/6] i2c: spacemit: ensure SDA is released after bus reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250827-k1-i2c-atomic-v1-5-e59bea02d680@linux.spacemit.com>
Date: Wed, 27 Aug 2025 15:39:12 +0800
From: Troy Mitchell <troy.mitchell@...ux.spacemit.com>
To: Andi Shyti <andi.shyti@...nel.org>, Yixun Lan <dlan@...too.org>, 
 Alex Elder <elder@...cstar.com>, Troy Mitchell <troymitchell988@...il.com>
Cc: linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-riscv@...ts.infradead.org, spacemit@...ts.linux.dev, 
 Troy Mitchell <troy.mitchell@...ux.spacemit.com>
Subject: [PATCH 5/6] i2c: spacemit: ensure SDA is released after bus reset

After performing a conditional bus reset, the controller must ensure
that the SDA line is actually released.

Previously, the reset routine only performed a single check,
which could leave the bus in a locked state in some situations.

This patch introduces a loop that toggles the reset cycle and issues
a reset request up to SPACEMIT_BUS_RESET_CLK_CNT_MAX times, checking
SDA after each attempt. If SDA is released before the maximum count,
the function returns early. Otherwise, a warning is emitted.

This change improves bus recovery reliability.

Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Troy Mitchell <troy.mitchell@...ux.spacemit.com>
---
 drivers/i2c/busses/i2c-k1.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-k1.c b/drivers/i2c/busses/i2c-k1.c
index 4d78ee7b6929ee43771e500d4f85d9e55e68b221..d2c0d20d19ba73baa8b2e9a6acb02b2cc3b7243f 100644
--- a/drivers/i2c/busses/i2c-k1.c
+++ b/drivers/i2c/busses/i2c-k1.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2024-2025 Troy Mitchell <troymitchell988@...il.com>
  */
 
+#include <linux/bitfield.h>
  #include <linux/clk.h>
  #include <linux/i2c.h>
  #include <linux/iopoll.h>
@@ -26,7 +27,8 @@
 #define SPACEMIT_CR_MODE_FAST    BIT(8)		/* bus mode (master operation) */
 /* Bit 9 is reserved */
 #define SPACEMIT_CR_UR           BIT(10)	/* unit reset */
-/* Bits 11-12 are reserved */
+#define SPACEMIT_CR_RSTREQ	 BIT(11)	/* i2c bus reset request */
+/* Bit 12 is reserved */
 #define SPACEMIT_CR_SCLE         BIT(13)	/* master clock enable */
 #define SPACEMIT_CR_IUE          BIT(14)	/* unit enable */
 /* Bits 15-17 are reserved */
@@ -78,6 +80,7 @@
 					SPACEMIT_SR_ALD)
 
 #define SPACEMIT_RCR_SDA_GLITCH_NOFIX		BIT(7)		/* bypass the SDA glitch fix */
+#define SPACEMIT_RCR_FIELD_RST_CYC		GENMASK(3, 0)	/* bypass the SDA glitch fix */
 
 /* SPACEMIT_IBMR register fields */
 #define SPACEMIT_BMR_SDA         BIT(0)		/* SDA line level */
@@ -91,6 +94,8 @@
 
 #define SPACEMIT_SR_ERR	(SPACEMIT_SR_BED | SPACEMIT_SR_RXOV | SPACEMIT_SR_ALD)
 
+#define SPACEMIT_BUS_RESET_CLK_CNT_MAX		9
+
 enum spacemit_i2c_state {
 	SPACEMIT_STATE_IDLE,
 	SPACEMIT_STATE_START,
@@ -163,6 +168,7 @@ static int spacemit_i2c_handle_err(struct spacemit_i2c_dev *i2c)
 static void spacemit_i2c_conditionally_reset_bus(struct spacemit_i2c_dev *i2c)
 {
 	u32 status;
+	u8 clk_cnt;
 
 	/* if bus is locked, reset unit. 0: locked */
 	status = readl(i2c->base + SPACEMIT_IBMR);
@@ -172,6 +178,21 @@ static void spacemit_i2c_conditionally_reset_bus(struct spacemit_i2c_dev *i2c)
 	spacemit_i2c_reset(i2c);
 	usleep_range(10, 20);
 
+	for (clk_cnt = 0; clk_cnt < SPACEMIT_BUS_RESET_CLK_CNT_MAX; clk_cnt++) {
+		status = readl(i2c->base + SPACEMIT_IBMR);
+		if (status & SPACEMIT_BMR_SDA)
+			break;
+
+		/* There's nothing left to save here, we are about to exit */
+		writel(FIELD_PREP(SPACEMIT_RCR_FIELD_RST_CYC, 1),
+		       i2c->base + SPACEMIT_IRCR);
+		writel(SPACEMIT_CR_RSTREQ, i2c->base + SPACEMIT_ICR);
+		usleep_range(20, 30);
+	}
+
+	if (clk_cnt < SPACEMIT_BUS_RESET_CLK_CNT_MAX)
+		return;
+
 	/* check sda again here */
 	status = readl(i2c->base + SPACEMIT_IBMR);
 	if (!(status & SPACEMIT_BMR_SDA))

-- 
2.50.1