| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250827013539.903682-8-terry.bowman@amd.com>
Date: Tue, 26 Aug 2025 20:35:22 -0500
From: Terry Bowman <terry.bowman@....com>
To: <dave@...olabs.net>, <jonathan.cameron@...wei.com>,
<dave.jiang@...el.com>, <alison.schofield@...el.com>,
<dan.j.williams@...el.com>, <bhelgaas@...gle.com>, <shiju.jose@...wei.com>,
<ming.li@...omail.com>, <Smita.KoralahalliChannabasappa@....com>,
<rrichter@....com>, <dan.carpenter@...aro.org>,
<PradeepVineshReddy.Kodamati@....com>, <lukas@...ner.de>,
<Benjamin.Cheatham@....com>, <sathyanarayanan.kuppuswamy@...ux.intel.com>,
<linux-cxl@...r.kernel.org>, <alucerop@....com>, <ira.weiny@...el.com>
CC: <linux-kernel@...r.kernel.org>, <linux-pci@...r.kernel.org>
Subject: [PATCH v11 07/23] CXL/PCI: Move CXL DVSEC definitions into uapi/linux/pci_regs.h
The CXL DVSECs are currently defined in cxl/core/cxlpci.h. These are not
accessible to other subsystems.
Change DVSEC name formatting to follow the existing PCI format in
pci_regs.h. The current format uses CXL_DVSEC_XYZ. Change to be PCI_DVSEC_CXL_XYZ.
Update existing occurrences to match the name change.
Update the inline documentation to refer to latest CXL spec version.
Signed-off-by: Terry Bowman <terry.bowman@....com>
---
drivers/cxl/core/pci.c | 62 +++++++++++++++++------------------
drivers/cxl/core/regs.c | 12 +++----
drivers/cxl/cxlpci.h | 53 ------------------------------
drivers/cxl/pci.c | 2 +-
drivers/pci/pci.c | 18 +++++-----
include/uapi/linux/pci_regs.h | 60 ++++++++++++++++++++++++++++++---
6 files changed, 104 insertions(+), 103 deletions(-)
diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index a3aef78f903a..d677691f8a05 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -110,19 +110,19 @@ static int cxl_dvsec_mem_range_valid(struct cxl_dev_state *cxlds, int id)
int rc, i;
u32 temp;
- if (id > CXL_DVSEC_RANGE_MAX)
+ if (id > PCI_DVSEC_CXL_RANGE_MAX)
return -EINVAL;
/* Check MEM INFO VALID bit first, give up after 1s */
i = 1;
do {
rc = pci_read_config_dword(pdev,
- d + CXL_DVSEC_RANGE_SIZE_LOW(id),
+ d + PCI_DVSEC_CXL_RANGE_SIZE_LOW(id),
&temp);
if (rc)
return rc;
- valid = FIELD_GET(CXL_DVSEC_MEM_INFO_VALID, temp);
+ valid = FIELD_GET(PCI_DVSEC_CXL_MEM_INFO_VALID, temp);
if (valid)
break;
msleep(1000);
@@ -146,17 +146,17 @@ static int cxl_dvsec_mem_range_active(struct cxl_dev_state *cxlds, int id)
int rc, i;
u32 temp;
- if (id > CXL_DVSEC_RANGE_MAX)
+ if (id > PCI_DVSEC_CXL_RANGE_MAX)
return -EINVAL;
/* Check MEM ACTIVE bit, up to 60s timeout by default */
for (i = media_ready_timeout; i; i--) {
rc = pci_read_config_dword(
- pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(id), &temp);
+ pdev, d + PCI_DVSEC_CXL_RANGE_SIZE_LOW(id), &temp);
if (rc)
return rc;
- active = FIELD_GET(CXL_DVSEC_MEM_ACTIVE, temp);
+ active = FIELD_GET(PCI_DVSEC_CXL_MEM_ACTIVE, temp);
if (active)
break;
msleep(1000);
@@ -185,11 +185,11 @@ int cxl_await_media_ready(struct cxl_dev_state *cxlds)
u16 cap;
rc = pci_read_config_word(pdev,
- d + CXL_DVSEC_CAP_OFFSET, &cap);
+ d + PCI_DVSEC_CXL_CAP_OFFSET, &cap);
if (rc)
return rc;
- hdm_count = FIELD_GET(CXL_DVSEC_HDM_COUNT_MASK, cap);
+ hdm_count = FIELD_GET(PCI_DVSEC_CXL_HDM_COUNT_MASK, cap);
for (i = 0; i < hdm_count; i++) {
rc = cxl_dvsec_mem_range_valid(cxlds, i);
if (rc)
@@ -217,16 +217,16 @@ static int cxl_set_mem_enable(struct cxl_dev_state *cxlds, u16 val)
u16 ctrl;
int rc;
- rc = pci_read_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, &ctrl);
+ rc = pci_read_config_word(pdev, d + PCI_DVSEC_CXL_CTRL_OFFSET, &ctrl);
if (rc < 0)
return rc;
- if ((ctrl & CXL_DVSEC_MEM_ENABLE) == val)
+ if ((ctrl & PCI_DVSEC_CXL_MEM_ENABLE) == val)
return 1;
- ctrl &= ~CXL_DVSEC_MEM_ENABLE;
+ ctrl &= ~PCI_DVSEC_CXL_MEM_ENABLE;
ctrl |= val;
- rc = pci_write_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, ctrl);
+ rc = pci_write_config_word(pdev, d + PCI_DVSEC_CXL_CTRL_OFFSET, ctrl);
if (rc < 0)
return rc;
@@ -242,7 +242,7 @@ static int devm_cxl_enable_mem(struct device *host, struct cxl_dev_state *cxlds)
{
int rc;
- rc = cxl_set_mem_enable(cxlds, CXL_DVSEC_MEM_ENABLE);
+ rc = cxl_set_mem_enable(cxlds, PCI_DVSEC_CXL_MEM_ENABLE);
if (rc < 0)
return rc;
if (rc > 0)
@@ -304,11 +304,11 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
return -ENXIO;
}
- rc = pci_read_config_word(pdev, d + CXL_DVSEC_CAP_OFFSET, &cap);
+ rc = pci_read_config_word(pdev, d + PCI_DVSEC_CXL_CAP_OFFSET, &cap);
if (rc)
return rc;
- if (!(cap & CXL_DVSEC_MEM_CAPABLE)) {
+ if (!(cap & PCI_DVSEC_CXL_MEM_CAPABLE)) {
dev_dbg(dev, "Not MEM Capable\n");
return -ENXIO;
}
@@ -319,7 +319,7 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
* driver is for a spec defined class code which must be CXL.mem
* capable, there is no point in continuing to enable CXL.mem.
*/
- hdm_count = FIELD_GET(CXL_DVSEC_HDM_COUNT_MASK, cap);
+ hdm_count = FIELD_GET(PCI_DVSEC_CXL_HDM_COUNT_MASK, cap);
if (!hdm_count || hdm_count > 2)
return -EINVAL;
@@ -328,11 +328,11 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
* disabled, and they will remain moot after the HDM Decoder
* capability is enabled.
*/
- rc = pci_read_config_word(pdev, d + CXL_DVSEC_CTRL_OFFSET, &ctrl);
+ rc = pci_read_config_word(pdev, d + PCI_DVSEC_CXL_CTRL_OFFSET, &ctrl);
if (rc)
return rc;
- info->mem_enabled = FIELD_GET(CXL_DVSEC_MEM_ENABLE, ctrl);
+ info->mem_enabled = FIELD_GET(PCI_DVSEC_CXL_MEM_ENABLE, ctrl);
if (!info->mem_enabled)
return 0;
@@ -345,35 +345,35 @@ int cxl_dvsec_rr_decode(struct cxl_dev_state *cxlds,
return rc;
rc = pci_read_config_dword(
- pdev, d + CXL_DVSEC_RANGE_SIZE_HIGH(i), &temp);
+ pdev, d + PCI_DVSEC_CXL_RANGE_SIZE_HIGH(i), &temp);
if (rc)
return rc;
size = (u64)temp << 32;
rc = pci_read_config_dword(
- pdev, d + CXL_DVSEC_RANGE_SIZE_LOW(i), &temp);
+ pdev, d + PCI_DVSEC_CXL_RANGE_SIZE_LOW(i), &temp);
if (rc)
return rc;
- size |= temp & CXL_DVSEC_MEM_SIZE_LOW_MASK;
+ size |= temp & PCI_DVSEC_CXL_MEM_SIZE_LOW_MASK;
if (!size) {
continue;
}
rc = pci_read_config_dword(
- pdev, d + CXL_DVSEC_RANGE_BASE_HIGH(i), &temp);
+ pdev, d + PCI_DVSEC_CXL_RANGE_BASE_HIGH(i), &temp);
if (rc)
return rc;
base = (u64)temp << 32;
rc = pci_read_config_dword(
- pdev, d + CXL_DVSEC_RANGE_BASE_LOW(i), &temp);
+ pdev, d + PCI_DVSEC_CXL_RANGE_BASE_LOW(i), &temp);
if (rc)
return rc;
- base |= temp & CXL_DVSEC_MEM_BASE_LOW_MASK;
+ base |= temp & PCI_DVSEC_CXL_MEM_BASE_LOW_MASK;
info->dvsec_range[ranges++] = (struct range) {
.start = base,
@@ -781,7 +781,7 @@ u16 cxl_gpf_get_dvsec(struct device *dev)
is_port = false;
dvsec = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_CXL,
- is_port ? CXL_DVSEC_PORT_GPF : CXL_DVSEC_DEVICE_GPF);
+ is_port ? PCI_DVSEC_CXL_PORT_GPF : PCI_DVSEC_CXL_DEVICE_GPF);
if (!dvsec)
dev_warn(dev, "%s GPF DVSEC not present\n",
is_port ? "Port" : "Device");
@@ -797,14 +797,14 @@ static int update_gpf_port_dvsec(struct pci_dev *pdev, int dvsec, int phase)
switch (phase) {
case 1:
- offset = CXL_DVSEC_PORT_GPF_PHASE_1_CONTROL_OFFSET;
- base = CXL_DVSEC_PORT_GPF_PHASE_1_TMO_BASE_MASK;
- scale = CXL_DVSEC_PORT_GPF_PHASE_1_TMO_SCALE_MASK;
+ offset = PCI_DVSEC_CXL_PORT_GPF_PHASE_1_CONTROL_OFFSET;
+ base = PCI_DVSEC_CXL_PORT_GPF_PHASE_1_TMO_BASE_MASK;
+ scale = PCI_DVSEC_CXL_PORT_GPF_PHASE_1_TMO_SCALE_MASK;
break;
case 2:
- offset = CXL_DVSEC_PORT_GPF_PHASE_2_CONTROL_OFFSET;
- base = CXL_DVSEC_PORT_GPF_PHASE_2_TMO_BASE_MASK;
- scale = CXL_DVSEC_PORT_GPF_PHASE_2_TMO_SCALE_MASK;
+ offset = PCI_DVSEC_CXL_PORT_GPF_PHASE_2_CONTROL_OFFSET;
+ base = PCI_DVSEC_CXL_PORT_GPF_PHASE_2_TMO_BASE_MASK;
+ scale = PCI_DVSEC_CXL_PORT_GPF_PHASE_2_TMO_SCALE_MASK;
break;
default:
return -EINVAL;
diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index 5ca7b0eed568..fb70ffbba72d 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -271,10 +271,10 @@ EXPORT_SYMBOL_NS_GPL(cxl_map_device_regs, "CXL");
static bool cxl_decode_regblock(struct pci_dev *pdev, u32 reg_lo, u32 reg_hi,
struct cxl_register_map *map)
{
- u8 reg_type = FIELD_GET(CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK, reg_lo);
- int bar = FIELD_GET(CXL_DVSEC_REG_LOCATOR_BIR_MASK, reg_lo);
+ u8 reg_type = FIELD_GET(PCI_DVSEC_CXL_REG_LOCATOR_BLOCK_ID_MASK, reg_lo);
+ int bar = FIELD_GET(PCI_DVSEC_CXL_REG_LOCATOR_BIR_MASK, reg_lo);
u64 offset = ((u64)reg_hi << 32) |
- (reg_lo & CXL_DVSEC_REG_LOCATOR_BLOCK_OFF_LOW_MASK);
+ (reg_lo & PCI_DVSEC_CXL_REG_LOCATOR_BLOCK_OFF_LOW_MASK);
if (offset > pci_resource_len(pdev, bar)) {
dev_warn(&pdev->dev,
@@ -311,15 +311,15 @@ static int __cxl_find_regblock_instance(struct pci_dev *pdev, enum cxl_regloc_ty
};
regloc = pci_find_dvsec_capability(pdev, PCI_VENDOR_ID_CXL,
- CXL_DVSEC_REG_LOCATOR);
+ PCI_DVSEC_CXL_REG_LOCATOR);
if (!regloc)
return -ENXIO;
pci_read_config_dword(pdev, regloc + PCI_DVSEC_HEADER1, ®loc_size);
regloc_size = FIELD_GET(PCI_DVSEC_HEADER1_LENGTH_MASK, regloc_size);
- regloc += CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET;
- regblocks = (regloc_size - CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET) / 8;
+ regloc += PCI_DVSEC_CXL_REG_LOCATOR_BLOCK1_OFFSET;
+ regblocks = (regloc_size - PCI_DVSEC_CXL_REG_LOCATOR_BLOCK1_OFFSET) / 8;
for (i = 0; i < regblocks; i++, regloc += 8) {
u32 reg_lo, reg_hi;
diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h
index 3959fa7e2ead..ad24d81e9eaa 100644
--- a/drivers/cxl/cxlpci.h
+++ b/drivers/cxl/cxlpci.h
@@ -7,59 +7,6 @@
#define CXL_MEMORY_PROGIF 0x10
-/*
- * See section 8.1 Configuration Space Registers in the CXL 2.0
- * Specification. Names are taken straight from the specification with "CXL" and
- * "DVSEC" redundancies removed. When obvious, abbreviations may be used.
- */
-#define PCI_DVSEC_HEADER1_LENGTH_MASK GENMASK(31, 20)
-
-/* CXL 2.0 8.1.3: PCIe DVSEC for CXL Device */
-#define CXL_DVSEC_PCIE_DEVICE 0
-#define CXL_DVSEC_CAP_OFFSET 0xA
-#define CXL_DVSEC_MEM_CAPABLE BIT(2)
-#define CXL_DVSEC_HDM_COUNT_MASK GENMASK(5, 4)
-#define CXL_DVSEC_CTRL_OFFSET 0xC
-#define CXL_DVSEC_MEM_ENABLE BIT(2)
-#define CXL_DVSEC_RANGE_SIZE_HIGH(i) (0x18 + (i * 0x10))
-#define CXL_DVSEC_RANGE_SIZE_LOW(i) (0x1C + (i * 0x10))
-#define CXL_DVSEC_MEM_INFO_VALID BIT(0)
-#define CXL_DVSEC_MEM_ACTIVE BIT(1)
-#define CXL_DVSEC_MEM_SIZE_LOW_MASK GENMASK(31, 28)
-#define CXL_DVSEC_RANGE_BASE_HIGH(i) (0x20 + (i * 0x10))
-#define CXL_DVSEC_RANGE_BASE_LOW(i) (0x24 + (i * 0x10))
-#define CXL_DVSEC_MEM_BASE_LOW_MASK GENMASK(31, 28)
-
-#define CXL_DVSEC_RANGE_MAX 2
-
-/* CXL 2.0 8.1.4: Non-CXL Function Map DVSEC */
-#define CXL_DVSEC_FUNCTION_MAP 2
-
-/* CXL 2.0 8.1.5: CXL 2.0 Extensions DVSEC for Ports */
-#define CXL_DVSEC_PORT_EXTENSIONS 3
-
-/* CXL 2.0 8.1.6: GPF DVSEC for CXL Port */
-#define CXL_DVSEC_PORT_GPF 4
-#define CXL_DVSEC_PORT_GPF_PHASE_1_CONTROL_OFFSET 0x0C
-#define CXL_DVSEC_PORT_GPF_PHASE_1_TMO_BASE_MASK GENMASK(3, 0)
-#define CXL_DVSEC_PORT_GPF_PHASE_1_TMO_SCALE_MASK GENMASK(11, 8)
-#define CXL_DVSEC_PORT_GPF_PHASE_2_CONTROL_OFFSET 0xE
-#define CXL_DVSEC_PORT_GPF_PHASE_2_TMO_BASE_MASK GENMASK(3, 0)
-#define CXL_DVSEC_PORT_GPF_PHASE_2_TMO_SCALE_MASK GENMASK(11, 8)
-
-/* CXL 2.0 8.1.7: GPF DVSEC for CXL Device */
-#define CXL_DVSEC_DEVICE_GPF 5
-
-/* CXL 2.0 8.1.8: PCIe DVSEC for Flex Bus Port */
-#define CXL_DVSEC_PCIE_FLEXBUS_PORT 7
-
-/* CXL 2.0 8.1.9: Register Locator DVSEC */
-#define CXL_DVSEC_REG_LOCATOR 8
-#define CXL_DVSEC_REG_LOCATOR_BLOCK1_OFFSET 0xC
-#define CXL_DVSEC_REG_LOCATOR_BIR_MASK GENMASK(2, 0)
-#define CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK GENMASK(15, 8)
-#define CXL_DVSEC_REG_LOCATOR_BLOCK_OFF_LOW_MASK GENMASK(31, 16)
-
/*
* NOTE: Currently all the functions which are enabled for CXL require their
* vectors to be in the first 16. Use this as the default max.
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index bd100ac31672..bd95be1f3d5c 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -933,7 +933,7 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
cxlds->rcd = is_cxl_restricted(pdev);
cxlds->serial = pci_get_dsn(pdev);
cxlds->cxl_dvsec = pci_find_dvsec_capability(
- pdev, PCI_VENDOR_ID_CXL, CXL_DVSEC_PCIE_DEVICE);
+ pdev, PCI_VENDOR_ID_CXL, PCI_DVSEC_CXL_DEVICE);
if (!cxlds->cxl_dvsec)
dev_warn(&pdev->dev,
"Device DVSEC not present, skip CXL.mem init\n");
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 9e42090fb108..d775ed37a79b 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -5031,7 +5031,7 @@ static int pci_dev_reset_slot_function(struct pci_dev *dev, bool probe)
static u16 cxl_port_dvsec(struct pci_dev *dev)
{
return pci_find_dvsec_capability(dev, PCI_VENDOR_ID_CXL,
- PCI_DVSEC_CXL_PORT);
+ PCI_DVSEC_CXL_PORT_EXT);
}
static bool cxl_sbr_masked(struct pci_dev *dev)
@@ -5043,7 +5043,9 @@ static bool cxl_sbr_masked(struct pci_dev *dev)
if (!dvsec)
return false;
- rc = pci_read_config_word(dev, dvsec + PCI_DVSEC_CXL_PORT_CTL, ®);
+ rc = pci_read_config_word(dev,
+ dvsec + PCI_DVSEC_CXL_PORT_EXT_CTL_OFFSET,
+ ®);
if (rc || PCI_POSSIBLE_ERROR(reg))
return false;
@@ -5052,7 +5054,7 @@ static bool cxl_sbr_masked(struct pci_dev *dev)
* bit in Bridge Control has no effect. When 1, the Port generates
* hot reset when the SBR bit is set to 1.
*/
- if (reg & PCI_DVSEC_CXL_PORT_CTL_UNMASK_SBR)
+ if (reg & PCI_DVSEC_CXL_PORT_EXT_CTL_UNMASK_SBR)
return false;
return true;
@@ -5097,22 +5099,22 @@ static int cxl_reset_bus_function(struct pci_dev *dev, bool probe)
if (probe)
return 0;
- rc = pci_read_config_word(bridge, dvsec + PCI_DVSEC_CXL_PORT_CTL, ®);
+ rc = pci_read_config_word(bridge, dvsec + PCI_DVSEC_CXL_PORT_EXT_CTL_OFFSET, ®);
if (rc)
return -ENOTTY;
- if (reg & PCI_DVSEC_CXL_PORT_CTL_UNMASK_SBR) {
+ if (reg & PCI_DVSEC_CXL_PORT_EXT_CTL_UNMASK_SBR) {
val = reg;
} else {
- val = reg | PCI_DVSEC_CXL_PORT_CTL_UNMASK_SBR;
- pci_write_config_word(bridge, dvsec + PCI_DVSEC_CXL_PORT_CTL,
+ val = reg | PCI_DVSEC_CXL_PORT_EXT_CTL_UNMASK_SBR;
+ pci_write_config_word(bridge, dvsec + PCI_DVSEC_CXL_PORT_EXT_CTL_OFFSET,
val);
}
rc = pci_reset_bus_function(dev, probe);
if (reg != val)
- pci_write_config_word(bridge, dvsec + PCI_DVSEC_CXL_PORT_CTL,
+ pci_write_config_word(bridge, dvsec + PCI_DVSEC_CXL_PORT_EXT_CTL_OFFSET,
reg);
return rc;
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index a3a3e942dedf..b03244d55aea 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -1225,9 +1225,61 @@
/* Deprecated old name, replaced with PCI_DOE_DATA_OBJECT_DISC_RSP_3_TYPE */
#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL PCI_DOE_DATA_OBJECT_DISC_RSP_3_TYPE
-/* Compute Express Link (CXL r3.1, sec 8.1.5) */
-#define PCI_DVSEC_CXL_PORT 3
-#define PCI_DVSEC_CXL_PORT_CTL 0x0c
-#define PCI_DVSEC_CXL_PORT_CTL_UNMASK_SBR 0x00000001
+/* Compute Express Link (CXL r3.2, sec 8.1)
+ *
+ * Note that CXL DVSEC id 3 and 7 to be ignored when the CXL link state
+ * is "disconnected" (CXL r3.2, sec 9.12.3). Re-enumerate these
+ * registers on downstream link-up events.
+ */
+
+#define PCI_DVSEC_HEADER1_LENGTH_MASK GENMASK(31, 20)
+
+/* CXL 3.2 8.1.3: PCIe DVSEC for CXL Device */
+#define PCI_DVSEC_CXL_DEVICE 0
+#define PCI_DVSEC_CXL_CAP_OFFSET 0xA
+#define PCI_DVSEC_CXL_MEM_CAPABLE BIT(2)
+#define PCI_DVSEC_CXL_HDM_COUNT_MASK GENMASK(5, 4)
+#define PCI_DVSEC_CXL_CTRL_OFFSET 0xC
+#define PCI_DVSEC_CXL_MEM_ENABLE BIT(2)
+#define PCI_DVSEC_CXL_RANGE_SIZE_HIGH(i) (0x18 + (i * 0x10))
+#define PCI_DVSEC_CXL_RANGE_SIZE_LOW(i) (0x1C + (i * 0x10))
+#define PCI_DVSEC_CXL_MEM_INFO_VALID BIT(0)
+#define PCI_DVSEC_CXL_MEM_ACTIVE BIT(1)
+#define PCI_DVSEC_CXL_MEM_SIZE_LOW_MASK GENMASK(31, 28)
+#define PCI_DVSEC_CXL_RANGE_BASE_HIGH(i) (0x20 + (i * 0x10))
+#define PCI_DVSEC_CXL_RANGE_BASE_LOW(i) (0x24 + (i * 0x10))
+#define PCI_DVSEC_CXL_MEM_BASE_LOW_MASK GENMASK(31, 28)
+
+#define PCI_DVSEC_CXL_RANGE_MAX 2
+
+/* CXL 3.2 8.1.4: Non-CXL Function Map DVSEC */
+#define PCI_DVSEC_CXL_FUNCTION_MAP 2
+
+/* CXL 3.2 8.1.5: Extensions DVSEC for Ports */
+#define PCI_DVSEC_CXL_PORT_EXT 3
+#define PCI_DVSEC_CXL_PORT_EXT_CTL_OFFSET 0x0c
+#define PCI_DVSEC_CXL_PORT_EXT_CTL_UNMASK_SBR 0x00000001
+
+/* CXL 3.2 8.1.6: GPF DVSEC for CXL Port */
+#define PCI_DVSEC_CXL_PORT_GPF 4
+#define PCI_DVSEC_CXL_PORT_GPF_PHASE_1_CONTROL_OFFSET 0x0C
+#define PCI_DVSEC_CXL_PORT_GPF_PHASE_1_TMO_BASE_MASK GENMASK(3, 0)
+#define PCI_DVSEC_CXL_PORT_GPF_PHASE_1_TMO_SCALE_MASK GENMASK(11, 8)
+#define PCI_DVSEC_CXL_PORT_GPF_PHASE_2_CONTROL_OFFSET 0xE
+#define PCI_DVSEC_CXL_PORT_GPF_PHASE_2_TMO_BASE_MASK GENMASK(3, 0)
+#define PCI_DVSEC_CXL_PORT_GPF_PHASE_2_TMO_SCALE_MASK GENMASK(11, 8)
+
+/* CXL 3.2 8.1.7: GPF DVSEC for CXL Device */
+#define PCI_DVSEC_CXL_DEVICE_GPF 5
+
+/* CXL 3.2 8.1.8: PCIe DVSEC for Flex Bus Port */
+#define PCI_DVSEC_CXL_FLEXBUS_PORT 7
+
+/* CXL 3.2 8.1.9: Register Locator DVSEC */
+#define PCI_DVSEC_CXL_REG_LOCATOR 8
+#define PCI_DVSEC_CXL_REG_LOCATOR_BLOCK1_OFFSET 0xC
+#define PCI_DVSEC_CXL_REG_LOCATOR_BIR_MASK GENMASK(2, 0)
+#define PCI_DVSEC_CXL_REG_LOCATOR_BLOCK_ID_MASK GENMASK(15, 8)
+#define PCI_DVSEC_CXL_REG_LOCATOR_BLOCK_OFF_LOW_MASK GENMASK(31, 16)
#endif /* LINUX_PCI_REGS_H */
--
2.51.0.rc2.21.ge5ab6b3e5a
Powered by blists - more mailing lists