| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250827-add-display-support-for-qcs615-platform-v7-2-917c3de8f9ca@oss.qualcomm.com>
Date: Wed, 27 Aug 2025 21:08:39 +0800
From: Fange Zhang <fange.zhang@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, xiangxu.yin@....qualcomm.com,
tingwei.zhang@....qualcomm.com, Li Liu <li.liu@....qualcomm.com>,
Fange Zhang <fange.zhang@....qualcomm.com>,
Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
Subject: [PATCH v7 2/2] arm64: dts: qcom: Add display support for QCS615
RIDE board
From: Li Liu <li.liu@....qualcomm.com>
Add display MDSS and DSI configuration for QCS615 RIDE board.
QCS615 has a DP port, and DP support will be added in a later patch.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
Signed-off-by: Li Liu <li.liu@....qualcomm.com>
Signed-off-by: Fange Zhang <fange.zhang@....qualcomm.com>
---
arch/arm64/boot/dts/qcom/qcs615-ride.dts | 150 +++++++++++++++++++++++++++++++
1 file changed, 150 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index e663343df75d59481786192cde647017a83c4191..f6e0c82cf85459d8989332497ded8b6ea3670c76 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -39,6 +39,76 @@ xo_board_clk: xo-board-clk {
};
};
+ dp-dsi0-connector {
+ compatible = "dp-connector";
+ label = "DSI0";
+ type = "mini";
+
+ port {
+ dp_dsi0_connector_in: endpoint {
+ remote-endpoint = <&dsi2dp_bridge_out>;
+ };
+ };
+ };
+
+ vreg_12p0: vreg-12p0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_12P0";
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vreg_5p0: vreg-5p0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_5P0";
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&vreg_12p0>;
+ };
+
+ vreg_1p8: vreg-1p8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_1P8";
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ vin-supply = <&vreg_5p0>;
+ };
+
+ vreg_1p0: vreg-1p0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_1P0";
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ vin-supply = <&vreg_1p8>;
+ };
+
+ vreg_3p0: vreg-3p0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VREG_3P0";
+
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ vin-supply = <&vreg_12p0>;
+ };
+
vreg_conn_1p8: regulator-conn-1p8 {
compatible = "regulator-fixed";
regulator-name = "vreg_conn_1p8";
@@ -288,6 +358,86 @@ vreg_l17a: ldo17 {
};
};
+&i2c2 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ io_expander: pinctrl@3e {
+ compatible = "semtech,sx1509q";
+ reg = <0x3e>;
+ interrupts-extended = <&tlmm 58 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ semtech,probe-reset;
+ };
+
+ i2c-mux@77 {
+ compatible = "nxp,pca9542";
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@58 {
+ compatible = "analogix,anx7625";
+ reg = <0x58>;
+ interrupts-extended = <&io_expander 0 IRQ_TYPE_EDGE_FALLING>;
+ enable-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+ vdd10-supply = <&vreg_1p0>;
+ vdd18-supply = <&vreg_1p8>;
+ vdd33-supply = <&vreg_3p0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dsi2dp_bridge_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dsi2dp_bridge_out: endpoint {
+ remote-endpoint = <&dp_dsi0_connector_in>;
+ };
+ };
+ };
+ };
+ };
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l11a>;
+ status = "okay";
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&dsi2dp_bridge_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vcca-supply = <&vreg_l5a>;
+ status = "okay";
+};
+
&pcie {
perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
--
2.34.1
Powered by blists - more mailing lists