lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250828095028.24503-4-balejk@matfyz.cz>
Date: Thu, 28 Aug 2025 11:49:04 +0200
From: Karel Balej <balejk@...fyz.cz>
To: linux-mmc@...r.kernel.org, ulf.hansson@...aro.org,
        Duje Mihanović <duje@...emihanovic.xyz>,
        Andrew Lunn <andrew@...n.ch>,
        Gregory Clement <gregory.clement@...tlin.com>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
        Karel Balej <balejk@...fyz.cz>
Subject: [PATCH v2 3/3] arm64: dts: samsung,coreprimevelte: add SDIO

Set some basic properties of the SDIO card of the samsung,coreprimevelte
smartphone.

The SDIO is used as an interface for WiFi, Bluetooth and FM radio
serviced by the Marvell 88W8777 (SD8777) chipset. Support for this
chipset is currently not in-tree because the firmware is not available
in linux-firmware, however it is possible to trivially run it
out-of-tree using the mwifiex and Marvell Bluetooth drivers with some
caveats.

Link: https://lore.kernel.org/r/20231029111807.19261-1-balejk@matfyz.cz/
Signed-off-by: Karel Balej <balejk@...fyz.cz>
---

Notes:
    v2:
    - Drop the sdh2 pinctrl configuration which was originally included by
      accident.
    - Drop broken-cd on the node as it's ignored with non-removable (thank
      you to Duje for pointing this out).

 .../mmp/pxa1908-samsung-coreprimevelte.dts    | 72 +++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
index 0ac1a24dc410..81806f655c88 100644
--- a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts
@@ -10,6 +10,7 @@ / {
 	aliases {
 		mmc0 = &sdh2; /* eMMC */
 		mmc1 = &sdh0; /* SD card */
+		mmc2 = &sdh1; /* SDIO */
 		serial0 = &uart0;
 	};
 
@@ -286,6 +287,69 @@ sdh0_pins_2: sdh0-pins-2 {
 		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
 		pinctrl-single,low-power-mode = <0x208 0x388>;
 	};
+
+	sdh1_pins_0: sdh1-pins-0 {
+		pinctrl-single,pins = <
+			0x170 1
+			0x174 1
+			0x178 1
+			0x17c 1
+			0x180 1>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh1_pins_1: sdh1-pins-1 {
+		pinctrl-single,pins = <0x184 1>;
+		pinctrl-single,drive-strength = <0 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+
+	sdh1_pins_2: sdh1-pins-2 {
+		pinctrl-single,pins = <0xec 0>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh1_fast_pins_0: sdh1-fast-pins-0 {
+		pinctrl-single,pins = <
+			0x170 1
+			0x174 1
+			0x178 1
+			0x17c 1
+			0x180 1
+		>;
+		pinctrl-single,drive-strength = <0x1800 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh1_fast_pins_1: sdh1-fast-pins-1 {
+		pinctrl-single,pins = <
+			0x184 1
+		>;
+		pinctrl-single,drive-strength = <0x1800 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
 };
 
 &uart0 {
@@ -367,3 +431,11 @@ &sdh0 {
 	vmmc-supply = <&ldo14>;
 	vqmmc-supply = <&ldo6>;
 };
+
+&sdh1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&sdh1_pins_0 &sdh1_pins_1 &sdh1_pins_2>;
+	pinctrl-1 = <&sdh1_fast_pins_0 &sdh1_fast_pins_1 &sdh1_pins_2>;
+	bus-width = <4>;
+	non-removable;
+};
-- 
2.51.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ