| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250829-can-v3-3-3b2f34094f59@nxp.com>
Date: Fri, 29 Aug 2025 15:08:58 +0800
From: Peng Fan <peng.fan@....com>
To: Marc Kleine-Budde <mkl@...gutronix.de>,
Vincent Mailhol <mailhol.vincent@...adoo.fr>, Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Aswath Govindraju <a-govindraju@...com>,
Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, Frank Li <frank.li@....com>,
Haibo Chen <haibo.chen@....com>
Cc: linux-can@...r.kernel.org, linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
Peng Fan <peng.fan@....com>
Subject: [PATCH v3 3/6] phy: phy-can-transceiver: Add dual channel support
for TJA1048
- Introduce new flag CAN_TRANSCEIVER_DUAL_CH to indicate the phy has two
channels.
- Alloc a phy for each channel
- Support TJA1048 which is a dual high-speed CAN transceiver with sleep
mode supported.
- Add can_transceiver_phy_xlate for parsing phy
Signed-off-by: Peng Fan <peng.fan@....com>
---
drivers/phy/phy-can-transceiver.c | 91 ++++++++++++++++++++++++++++-----------
1 file changed, 65 insertions(+), 26 deletions(-)
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index 6415c6af0e8414a6cc8d15958a17ee749a3f28e9..f06b1df76ada023f432dce892c3346f45397ab54 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -17,6 +17,7 @@ struct can_transceiver_data {
u32 flags;
#define CAN_TRANSCEIVER_STB_PRESENT BIT(0)
#define CAN_TRANSCEIVER_EN_PRESENT BIT(1)
+#define CAN_TRANSCEIVER_DUAL_CH BIT(2)
};
struct can_transceiver_phy {
@@ -29,6 +30,7 @@ struct can_transceiver_phy {
struct can_transceiver_priv {
struct can_transceiver_phy *can_transceiver_phy;
struct mux_state *mux_state;
+ int num_ch;
};
/* Power on function */
@@ -81,6 +83,10 @@ static const struct can_transceiver_data tcan1043_drvdata = {
.flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_EN_PRESENT,
};
+static const struct can_transceiver_data tja1048_drvdata = {
+ .flags = CAN_TRANSCEIVER_STB_PRESENT | CAN_TRANSCEIVER_DUAL_CH,
+};
+
static const struct of_device_id can_transceiver_phy_ids[] = {
{
.compatible = "ti,tcan1042",
@@ -90,6 +96,10 @@ static const struct of_device_id can_transceiver_phy_ids[] = {
.compatible = "ti,tcan1043",
.data = &tcan1043_drvdata
},
+ {
+ .compatible = "nxp,tja1048",
+ .data = &tja1048_drvdata
+ },
{
.compatible = "nxp,tjr1443",
.data = &tcan1043_drvdata
@@ -108,6 +118,25 @@ devm_mux_state_get_optional(struct device *dev, const char *mux_name)
return devm_mux_state_get(dev, mux_name);
}
+static struct phy *can_transceiver_phy_xlate(struct device *dev,
+ const struct of_phandle_args *args)
+{
+ struct can_transceiver_priv *priv = dev_get_drvdata(dev);
+ u32 idx;
+
+ if (priv->num_ch == 1)
+ return priv->can_transceiver_phy[0].generic_phy;
+
+ if (args->args_count != 1)
+ return ERR_PTR(-EINVAL);
+
+ idx = args->args[0];
+ if (idx >= priv->num_ch)
+ return ERR_PTR(-EINVAL);
+
+ return priv->can_transceiver_phy[idx].generic_phy;
+}
+
static int can_transceiver_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
@@ -120,7 +149,8 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
struct gpio_desc *enable_gpio;
struct mux_state *mux_state;
u32 max_bitrate = 0;
- int err;
+ int num_ch = 1;
+ int err, i;
match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
drvdata = match->data;
@@ -131,7 +161,11 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, priv);
- priv->can_transceiver_phy = devm_kzalloc(dev, sizeof(struct can_transceiver_phy),
+ if (drvdata->flags & CAN_TRANSCEIVER_DUAL_CH)
+ num_ch = 2;
+
+ priv->num_ch = num_ch;
+ priv->can_transceiver_phy = devm_kcalloc(dev, num_ch, sizeof(struct can_transceiver_phy),
GFP_KERNEL);
if (!priv->can_transceiver_phy)
return -ENOMEM;
@@ -142,38 +176,43 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
priv->mux_state = mux_state;
- phy = devm_phy_create(dev, dev->of_node,
- &can_transceiver_phy_ops);
- if (IS_ERR(phy)) {
- dev_err(dev, "failed to create can transceiver phy\n");
- return PTR_ERR(phy);
- }
-
err = device_property_read_u32(dev, "max-bitrate", &max_bitrate);
if ((err != -EINVAL) && !max_bitrate)
dev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit\n");
- phy->attrs.max_link_rate = max_bitrate;
- priv->can_transceiver_phy->generic_phy = phy;
- priv->can_transceiver_phy->priv = priv;
+ for (i = 0; i < num_ch; i++) {
+ phy = devm_phy_create(dev, dev->of_node, &can_transceiver_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create can transceiver phy\n");
+ return PTR_ERR(phy);
+ }
- if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) {
- standby_gpio = devm_gpiod_get_optional(dev, "standby", GPIOD_OUT_HIGH);
- if (IS_ERR(standby_gpio))
- return PTR_ERR(standby_gpio);
- priv->can_transceiver_phy->standby_gpio = standby_gpio;
- }
+ phy->attrs.max_link_rate = max_bitrate;
- if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) {
- enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
- if (IS_ERR(enable_gpio))
- return PTR_ERR(enable_gpio);
- priv->can_transceiver_phy->enable_gpio = enable_gpio;
- }
+ priv->can_transceiver_phy[i].generic_phy = phy;
+ priv->can_transceiver_phy[i].priv = priv;
- phy_set_drvdata(priv->can_transceiver_phy->generic_phy, priv->can_transceiver_phy);
+ if (drvdata->flags & CAN_TRANSCEIVER_STB_PRESENT) {
+ standby_gpio = devm_gpiod_get_index_optional(dev, "standby", i,
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(standby_gpio))
+ return PTR_ERR(standby_gpio);
+ priv->can_transceiver_phy[i].standby_gpio = standby_gpio;
+ }
+
+ if (drvdata->flags & CAN_TRANSCEIVER_EN_PRESENT) {
+ enable_gpio = devm_gpiod_get_index_optional(dev, "enable", i,
+ GPIOD_OUT_LOW);
+ if (IS_ERR(enable_gpio))
+ return PTR_ERR(enable_gpio);
+ priv->can_transceiver_phy[i].enable_gpio = enable_gpio;
+ }
+
+ phy_set_drvdata(priv->can_transceiver_phy[i].generic_phy,
+ &priv->can_transceiver_phy[i]);
+ }
- phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ phy_provider = devm_of_phy_provider_register(dev, can_transceiver_phy_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
--
2.37.1
Powered by blists - more mailing lists