[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID:
<TY3PR01MB99838D9B5B7A2E51058378EBD53AA@TY3PR01MB9983.jpnprd01.prod.outlook.com>
Date: Fri, 29 Aug 2025 10:21:45 +0000
From: "Kazuhiro Abe (Fujitsu)" <fj1078ii@...itsu.com>
To: 'Ilkka Koskinen' <ilkka@...amperecomputing.com>
CC: 'Lorenzo Pieralisi' <lpieralisi@...nel.org>, 'Hanjun Guo'
<guohanjun@...wei.com>, 'Sudeep Holla' <sudeep.holla@....com>, "'Rafael J.
Wysocki'" <rafael@...nel.org>, 'Len Brown' <lenb@...nel.org>,
"'linux-acpi@...r.kernel.org'" <linux-acpi@...r.kernel.org>,
"'linux-arm-kernel@...ts.infradead.org'"
<linux-arm-kernel@...ts.infradead.org>, "'linux-kernel@...r.kernel.org'"
<linux-kernel@...r.kernel.org>
Subject: RE: [PATCH] ACPI: AGDI: Add interrupt signaling mode support
Hi, Ilkka
> Hi, Ilkka
>
> > Hi Kazuhiro
> >
> > On Mon, 18 Aug 2025, Kazuhiro Abe wrote:
> > > AGDI has two types of signaling modes: SDEI and interrupt.
> > > Currently, the AGDI driver only supports SDEI.
> > > Therefore, add support for interrupt singaling mode The interrupt
> > > vector is retrieved from the AGDI table, and call panic function
> > > when an interrupt occurs.
> > > SDEI & Interrupt mode is not supported.
> > >
> > > Signed-off-by: Kazuhiro Abe <fj1078ii@...jp.fujitsu.com>
> > > ---
> > > drivers/acpi/arm64/agdi.c | 114
> > +++++++++++++++++++++++++++++++++++---
> > > include/acpi/actbl2.h | 4 +-
> > > 2 files changed, 110 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c
> > > index e0df3daa4abf0..c514bb874c5d3 100644
> > > --- a/drivers/acpi/arm64/agdi.c
> > > +++ b/drivers/acpi/arm64/agdi.c
> > > @@ -16,7 +16,11 @@
> > > #include "init.h"
> > >
> > > struct agdi_data {
> > > + unsigned char flags;
> > > int sdei_event;
> > > + unsigned int gsiv;
> > > + bool use_nmi;
> > > + int irq;
> > > };
> > >
> > > static int agdi_sdei_handler(u32 sdei_event, struct pt_regs *regs,
> > > void *arg) @@ -48,6 +52,55 @@ static int agdi_sdei_probe(struct
> > platform_device *pdev,
> > > return 0;
> > > }
> > >
> > > +static irqreturn_t agdi_interrupt_handler_nmi(int irq, void
> > > +*dev_id) {
> > > + nmi_panic(NULL, "Arm Generic Diagnostic Dump and Reset NMI
> > Interrupt event issued\n");
> > > + return IRQ_HANDLED;
> > > +}
> > > +
> > > +static irqreturn_t agdi_interrupt_handler_irq(int irq, void
> > > +*dev_id) {
> > > + panic("Arm Generic Diagnostic Dump and Reset Interrupt event
> > issued\n");
> > > + return IRQ_HANDLED;
> > > +}
> > > +
> > > +static int agdi_interrupt_probe(struct platform_device *pdev,
> > > + struct agdi_data *adata)
> > > +{
> > > + unsigned long irq_flags;
> > > + int ret;
> > > + int irq;
> > > +
> > > + irq = acpi_register_gsi(NULL, adata->gsiv, ACPI_EDGE_SENSITIVE,
> > ACPI_ACTIVE_HIGH);
> > > + if (irq < 0) {
> > > + dev_err(&pdev->dev, "cannot register GSI#%d (%d)\n",
> > adata->gsiv, irq);
> > > + return irq;
> > > + }
> > > +
> > > + irq_flags = IRQF_PERCPU | IRQF_NOBALANCING | IRQF_NO_AUTOEN |
> > > + IRQF_NO_THREAD;
> > > + /* try NMI first */
> > > + ret = request_nmi(irq, &agdi_interrupt_handler_nmi, irq_flags,
> > > + "agdi_interrupt_nmi", NULL);
> > > + if (ret) {
> > > + ret = request_irq(irq, &agdi_interrupt_handler_irq,
> > > + irq_flags, "agdi_interrupt_irq", NULL);
> > > + if (ret) {
> > > + dev_err(&pdev->dev, "cannot register IRQ %d\n", ret);
> > > + acpi_unregister_gsi(adata->gsiv);
> > > + return ret;
> > > + }
> > > + enable_irq(irq);
> > > + adata->irq = irq;
> > > + } else {
> > > + enable_nmi(irq);
> > > + adata->irq = irq;
> > > + adata->use_nmi = true;
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > static int agdi_probe(struct platform_device *pdev) {
> > > struct agdi_data *adata = dev_get_platdata(&pdev->dev); @@ -55,12
> > > +108,20 @@ static int agdi_probe(struct platform_device *pdev)
> > > if (!adata)
> > > return -EINVAL;
> > >
> > > - return agdi_sdei_probe(pdev, adata);
> > > + switch (adata->flags & ACPI_AGDI_SIGNALING_MODE_MASK) {
> > > + case ACPI_AGDI_SIGNALING_MODE_SDEI:
> > > + return agdi_sdei_probe(pdev, adata);
> > > +
> > > + case ACPI_AGDI_SIGNALING_MODE_INTERRUPT:
> > > + return agdi_interrupt_probe(pdev, adata);
> > > + }
> > > +
> > > + return 0;
> > > }
> > >
> > > -static void agdi_remove(struct platform_device *pdev)
> > > +static void agdi_sdei_remove(struct platform_device *pdev,
> > > + struct agdi_data *adata)
> > > {
> > > - struct agdi_data *adata = dev_get_platdata(&pdev->dev);
> > > int err, i;
> > >
> > > err = sdei_event_disable(adata->sdei_event);
> > > @@ -83,6 +144,34 @@ static void agdi_remove(struct platform_device
> *pdev)
> > > adata->sdei_event, ERR_PTR(err)); }
> > >
> > > +static void agdi_interrupt_remove(struct platform_device *pdev,
> > > + struct agdi_data *adata)
> > > +{
> > > + if (adata->irq != -1) {
> > > + if (adata->use_nmi)
> > > + free_nmi(adata->irq, NULL);
> > > + else
> > > + free_irq(adata->irq, NULL);
> > > +
> > > + acpi_unregister_gsi(adata->gsiv);
> > > + }
> > > +}
> > > +
> > > +static void agdi_remove(struct platform_device *pdev) {
> > > + struct agdi_data *adata = dev_get_platdata(&pdev->dev);
> > > +
> > > + switch (adata->flags & ACPI_AGDI_SIGNALING_MODE_MASK) {
> > > + case ACPI_AGDI_SIGNALING_MODE_SDEI:
> > > + agdi_sdei_remove(pdev, adata);
> > > + break;
> > > +
> > > + case ACPI_AGDI_SIGNALING_MODE_INTERRUPT:
> > > + agdi_interrupt_remove(pdev, adata);
> > > + break;
> > > + }
> > > +}
> > > +
> > > static struct platform_driver agdi_driver = {
> > > .driver = {
> > > .name = "agdi",
> > > @@ -94,7 +183,7 @@ static struct platform_driver agdi_driver = {
> > > void __init acpi_agdi_init(void) {
> > > struct acpi_table_agdi *agdi_table;
> > > - struct agdi_data pdata;
> > > + struct agdi_data pdata = {0};
> > > struct platform_device *pdev;
> > > acpi_status status;
> > >
> > > @@ -103,12 +192,23 @@ void __init acpi_agdi_init(void)
> > > if (ACPI_FAILURE(status))
> > > return;
> > >
> > > - if (agdi_table->flags & ACPI_AGDI_SIGNALING_MODE) {
> > > - pr_warn("Interrupt signaling is not supported");
> > > + switch (agdi_table->flags & ACPI_AGDI_SIGNALING_MODE_MASK) {
> > > + case ACPI_AGDI_SIGNALING_MODE_SDEI:
> > > + pdata.sdei_event = agdi_table->sdei_event;
> > > + break;
> > > +
> > > + case ACPI_AGDI_SIGNALING_MODE_INTERRUPT:
> > > + pdata.gsiv = agdi_table->gsiv;
> > > + break;
> > > +
> > > + default:
> > > + pr_warn("Signaling mode(%d) is not supported",
> > > + agdi_table->flags &
> > ACPI_AGDI_SIGNALING_MODE_MASK);
> > > goto err_put_table;
> > > }
> > >
> > > - pdata.sdei_event = agdi_table->sdei_event;
> > > + pdata.irq = -1;
> > > + pdata.flags = agdi_table->flags;
> > >
> > > pdev = platform_device_register_data(NULL, "agdi", 0, &pdata,
> > sizeof(pdata));
> > > if (IS_ERR(pdev))
> > > diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h index
> > > 048f5f47f8b88..9ddbdd772f139 100644
> > > --- a/include/acpi/actbl2.h
> > > +++ b/include/acpi/actbl2.h
> > > @@ -339,7 +339,9 @@ struct acpi_table_agdi {
> > >
> > > /* Mask for Flags field above */
> > >
> > > -#define ACPI_AGDI_SIGNALING_MODE (1)
> > > +#define ACPI_AGDI_SIGNALING_MODE_MASK (3) #define
> > > +ACPI_AGDI_SIGNALING_MODE_SDEI (0) #define
> > > +ACPI_AGDI_SIGNALING_MODE_INTERRUPT (1)
> > >
> > > /*******************************************************************
> > > **
> > > **********
> > > *
> >
> > Like Hanjun mentioned, these should go through ACPICA project. When
> > you do that could you also add the SDEI flag to the other places,
> > which are needed for iasl to be able to decode AGDI tables. You can
> > find them if you take a look at my patch in ACPICA project.
>
> Thanks for your comment. I found your patch.
> I will send a patch to ACPICA first. Once it is merged, I will send v2.
After reconsidering, I decided that the acpica code fix was unnecessary,
so I posted v2 patch without the acpica fix.
Best Regards,
Kazuhiro Abe
>
> Best Regards,
> Kazuhiro Abe
>
> >
> > Cheers, Ilkka
> >
> > > --
> > > 2.43.0
> > >
> > >
> > >
Powered by blists - more mailing lists