linux-kernel - Re: [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <3731e13f-d601-4fe4-a3d2-6dd3289b6396@tuxon.dev>
Date: Fri, 29 Aug 2025 15:17:22 +0300
From: claudiu beznea <claudiu.beznea@...on.dev>
To: Wolfram Sang <wsa+renesas@...g-engineering.com>
Cc: vkoul@...nel.org, kishon@...nel.org, robh@...nel.org, krzk+dt@...nel.org,
 conor+dt@...nel.org, p.zabel@...gutronix.de, geert+renesas@...der.be,
 magnus.damm@...il.com, yoshihiro.shimoda.uh@...esas.com,
 biju.das.jz@...renesas.com, linux-phy@...ts.infradead.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 linux-renesas-soc@...r.kernel.org
Subject: Re: [PATCH v5 0/7] Add initial USB support for the Renesas RZ/G3S SoC



On 8/29/25 14:51, Wolfram Sang wrote:
> 
>>> Yes, I added it and it made the error go away, but still no USB. I
>>
>> The drivers are not probed or you see no activity when connecting USB devices?
> 
> Sigh, I was so sure to have checked OHCI/EHCI but only EHCI was enabled :(
> 
> Checking with the schematics, I get it that only the rightmost USB-A
> connectors on the carrier board are routed. Those two work fine now.
> 
> If that is to be expected, then for the whole series:

Yes, only those 2 are routed on RZ SMARC Carrier II + RZ/G3S SMARC Module.

> 
> Tested-by: Wolfram Sang <wsa+renesas@...g-engineering.com>
> 

Thank you for doing this,
Claudiu