linux-kernel - [PATCH v7 08/12] i2c: rtl9300: do not set read mode on every transfer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250831100457.3114-9-jelonek.jonas@gmail.com>
Date: Sun, 31 Aug 2025 10:04:53 +0000
From: Jonas Jelonek <jelonek.jonas@...il.com>
To: Chris Packham <chris.packham@...iedtelesis.co.nz>,
	Andi Shyti <andi.shyti@...nel.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>
Cc: linux-i2c@...r.kernel.org,
	Conor Dooley <conor+dt@...nel.org>,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	Markus Stockhausen <markus.stockhausen@....de>,
	Sven Eckelmann <sven@...fation.org>,
	Harshal Gohel <hg@...onwunderlich.de>,
	Wolfram Sang <wsa+renesas@...g-engineering.com>,
	Jonas Jelonek <jelonek.jonas@...il.com>
Subject: [PATCH v7 08/12] i2c: rtl9300: do not set read mode on every transfer

Move the operation to set the read mode from config_xfer to probe.

The I2C controller of RTL9300 and RTL9310 support a legacy message mode
for READs with 'Read Address Data' instead of the standard format 'Write
Address ; Read Data'. There is no way to pass that via smbus_xfer, thus
there is no point in supported this in the driver and moreover no point
in setting this on every transaction. Setting this once in the probe
call is sufficient.

Signed-off-by: Jonas Jelonek <jelonek.jonas@...il.com>
Tested-by: Sven Eckelmann <sven@...fation.org>
Reviewed-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@...iedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@....de>
---
 drivers/i2c/busses/i2c-rtl9300.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-rtl9300.c b/drivers/i2c/busses/i2c-rtl9300.c
index 4177cfb77094..9e3517b09b3d 100644
--- a/drivers/i2c/busses/i2c-rtl9300.c
+++ b/drivers/i2c/busses/i2c-rtl9300.c
@@ -130,11 +130,7 @@ static int rtl9300_i2c_config_xfer(struct rtl9300_i2c *i2c, struct rtl9300_i2c_c
 	if (ret)
 		return ret;
 
-	ret = regmap_field_write(i2c->fields[F_DATA_WIDTH], (len - 1) & 0xf);
-	if (ret)
-		return ret;
-
-	return regmap_field_write(i2c->fields[F_RD_MODE], 0);
+	return regmap_field_write(i2c->fields[F_DATA_WIDTH], (len - 1) & 0xf);
 }
 
 static int rtl9300_i2c_read(struct rtl9300_i2c *i2c, u8 *buf, int len)
@@ -455,6 +451,11 @@ static int rtl9300_i2c_probe(struct platform_device *pdev)
 	}
 	i2c->sda_num = 0xff;
 
+	/* only use standard read format */
+	ret = regmap_field_write(i2c->fields[F_RD_MODE], 0);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
-- 
2.48.1