[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250901194742.11599-5-petre.rodan@subdimension.ro>
Date: Mon, 1 Sep 2025 22:47:30 +0300
From: Petre Rodan <petre.rodan@...dimension.ro>
To: linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Petre Rodan <petre.rodan@...dimension.ro>,
Jonathan Cameron <jic23@...nel.org>,
David Lechner <dlechner@...libre.com>,
Nuno Sá <nuno.sa@...log.com>,
Andy Shevchenko <andy@...nel.org>
Subject: [PATCH 04/10] iio: accel: BMA220 add i2c module
Add i2c module.
Note that the kernel module transparently shifts all register addresses
1 bit to the left, so all functions will operate based on the SPI memory
map.
Signed-off-by: Petre Rodan <petre.rodan@...dimension.ro>
---
drivers/iio/accel/Kconfig | 9 ++++-
drivers/iio/accel/Makefile | 1 +
drivers/iio/accel/bma220.h | 1 +
drivers/iio/accel/bma220_core.c | 19 ++++++++++
drivers/iio/accel/bma220_i2c.c | 62 +++++++++++++++++++++++++++++++++
5 files changed, 91 insertions(+), 1 deletion(-)
create mode 100644 drivers/iio/accel/bma220_i2c.c
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 9b6c35b75948..b3c5b0b7a406 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -221,6 +221,7 @@ config BMA220
select REGMAP
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
+ select BMA220_I2C if I2C
select BMA220_SPI if SPI
help
Say yes here to add support for the Bosch BMA220 triaxial
@@ -228,7 +229,13 @@ config BMA220
To compile this driver as a module, choose M here: the
module will be called bma220_core and you will also get
- bma220_spi if SPI is enabled.
+ bma220_i2c if I2C is enabled and bma220_spi if SPI is
+ enabled.
+
+config BMA220_I2C
+ tristate
+ select REGMAP_I2C
+ depends on BMA220
config BMA220_SPI
tristate
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 56a9f848f7f9..fa440a859283 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_ADXL380_I2C) += adxl380_i2c.o
obj-$(CONFIG_ADXL380_SPI) += adxl380_spi.o
obj-$(CONFIG_BMA180) += bma180.o
obj-$(CONFIG_BMA220) += bma220_core.o
+obj-$(CONFIG_BMA220_I2C) += bma220_i2c.o
obj-$(CONFIG_BMA220_SPI) += bma220_spi.o
obj-$(CONFIG_BMA400) += bma400_core.o
obj-$(CONFIG_BMA400_I2C) += bma400_i2c.o
diff --git a/drivers/iio/accel/bma220.h b/drivers/iio/accel/bma220.h
index 5eefa9749d33..ae4b74514629 100644
--- a/drivers/iio/accel/bma220.h
+++ b/drivers/iio/accel/bma220.h
@@ -13,6 +13,7 @@
#include <linux/iio/iio.h>
extern const struct regmap_config bma220_spi_regmap_config;
+extern const struct regmap_config bma220_i2c_regmap_config;
extern const struct dev_pm_ops bma220_pm_ops;
int bma220_common_probe(struct device *dev, struct regmap *regmap, int irq);
diff --git a/drivers/iio/accel/bma220_core.c b/drivers/iio/accel/bma220_core.c
index e6dac2e1cf4d..fae84823d52b 100644
--- a/drivers/iio/accel/bma220_core.c
+++ b/drivers/iio/accel/bma220_core.c
@@ -225,6 +225,25 @@ const struct regmap_config bma220_spi_regmap_config = {
};
EXPORT_SYMBOL_NS(bma220_spi_regmap_config, "IIO_BOSCH_BMA220");
+/*
+ * Based on the datasheet the memory map differs between the SPI and the I2C
+ * implementations. I2C register addresses are simply shifted to the left
+ * by 1 bit yet the register size remains unchanged.
+ * This driver employs the SPI memory map to correlate register names to
+ * addresses regardless of the bus type.
+ */
+
+const struct regmap_config bma220_i2c_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .reg_shift = -1,
+ .max_register = BMA220_REG_SOFTRESET,
+ .cache_type = REGCACHE_MAPLE,
+ .writeable_reg = bma220_is_writable_reg,
+ .volatile_reg = bma220_is_volatile_reg,
+};
+EXPORT_SYMBOL_NS(bma220_i2c_regmap_config, "IIO_BOSCH_BMA220");
+
static int bma220_data_rdy_trigger_set_state(struct iio_trigger *trig,
bool state)
{
diff --git a/drivers/iio/accel/bma220_i2c.c b/drivers/iio/accel/bma220_i2c.c
new file mode 100644
index 000000000000..8a1644aac287
--- /dev/null
+++ b/drivers/iio/accel/bma220_i2c.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Bosch triaxial acceleration sensor
+ *
+ * Copyright (c) 2025 Petre Rodan <petre.rodan@...dimension.ro>
+ *
+ * Datasheet: https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA220.pdf
+ * I2C address is either 0x0b or 0x0a depending on CSB (pin 10)
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#include <linux/iio/iio.h>
+
+#include "bma220.h"
+
+static int bma220_i2c_probe(struct i2c_client *client)
+{
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_i2c(client, &bma220_i2c_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "failed to create regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ return bma220_common_probe(&client->dev, regmap, client->irq);
+}
+
+static const struct of_device_id bma220_i2c_match[] = {
+ { .compatible = "bosch,bma220" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bma220_i2c_match);
+
+static const struct i2c_device_id bma220_i2c_id[] = {
+ { "bma220" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, bma220_i2c_id);
+
+static struct i2c_driver bma220_i2c_driver = {
+ .driver = {
+ .name = "bma220_i2c",
+ .pm = pm_sleep_ptr(&bma220_pm_ops),
+ .of_match_table = bma220_i2c_match,
+ },
+ .probe = bma220_i2c_probe,
+ .id_table = bma220_i2c_id,
+};
+module_i2c_driver(bma220_i2c_driver);
+
+MODULE_AUTHOR("Petre Rodan <petre.rodan@...dimension.ro>");
+MODULE_DESCRIPTION("Bosch triaxial acceleration sensor i2c driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("IIO_BOSCH_BMA220");
--
2.49.1
Powered by blists - more mailing lists