| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250902140018.247209-2-krzysztof.kozlowski@linaro.org>
Date: Tue, 2 Sep 2025 16:00:19 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [RESEND PATCH v3] arm64: dts: qcom: sm8750-mtp: Add WiFi and Bluetooth
MTP8750 rev 2.0 (power grid v8) boards come as two different variants
with different WiFi chips: WCN7850 and WCN786x. WCN7850 is already
supported by the kernel, but WCN786x is not. Both of the board variants
are considered newest revisions and the difference is only in MCN
numbers and internal codenames.
Add WCN7850 WiFi and Bluetooth to the MTP8750, stating that this DTS
represents the WCN7850 variant. The S4D and S5F regulators should
operate at 0.85 V, thus adjust lower constraint and regulator name.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Changes in v3:
1. Add also PCIe nodes, because they were not planned to be sent
separately.
2. Drop pieces of comments as discussed with Dmitry.
v2: https://lore.kernel.org/all/20250811131055.154233-2-krzysztof.kozlowski@linaro.org/
Changes in v2:
1. Add missing &qupv3_2 enable, so Bluetooth works.
2. Adjust also S4D regulator constraint.
No dependencies, can be merged.
---
arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 147 +++++++++++++++++++++++-
1 file changed, 143 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 946ba53fe63a..3bbb53b7c71f 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -201,6 +201,74 @@ vph_pwr: vph-pwr-regulator {
regulator-always-on;
regulator-boot-on;
};
+
+ /*
+ * MTPs rev 2.0 (power grid v8) come with two different WiFi chips:
+ * WCN7850 and WCN786x.
+ * Device nodes here for the PMU, WiFi and Bluetooth describe the MTP
+ * variant with WCN7850.
+ */
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_en>, <&bt_default>;
+
+ wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+ bt-enable-gpios = <&pm8550ve_f_gpios 3 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <&vreg_s5f_0p85>;
+ vddio-supply = <&vreg_l3f_1p8>;
+ vddio1p2-supply = <&vreg_l2f_1p2>;
+ vddaon-supply = <&vreg_s4d_0p85>;
+ vdddig-supply = <&vreg_s1d_0p97>;
+ vddrfa1p2-supply = <&vreg_s7i_1p2>;
+ vddrfa1p8-supply = <&vreg_s3g_1p8>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
};
&apps_rsc {
@@ -426,7 +494,7 @@ vreg_s3d_1p2: smps3 {
vreg_s4d_0p85: smps4 {
regulator-name = "vreg_s4d_0p85";
- regulator-min-microvolt = <500000>;
+ regulator-min-microvolt = <852000>;
regulator-max-microvolt = <1036000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -472,9 +540,9 @@ regulators-2 {
qcom,pmic-id = "f";
- vreg_s5f_0p5: smps5 {
- regulator-name = "vreg_s5f_0p5";
- regulator-min-microvolt = <500000>;
+ vreg_s5f_0p85: smps5 {
+ regulator-name = "vreg_s5f_0p85";
+ regulator-min-microvolt = <852000>;
regulator-max-microvolt = <1000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -891,6 +959,40 @@ &pon_resin {
status = "okay";
};
+&pcie0 {
+ wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+ perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l1f_0p88>;
+ vdda-pll-supply = <&vreg_l3g_1p2>;
+
+ status = "okay";
+};
+
+&pcieport0 {
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
&pmih0108_eusb2_repeater {
status = "okay";
@@ -902,6 +1004,10 @@ &qupv3_1 {
status = "okay";
};
+&qupv3_2 {
+ status = "okay";
+};
+
&remoteproc_adsp {
firmware-name = "qcom/sm8750/adsp.mbn",
"qcom/sm8750/adsp_dtb.mbn";
@@ -1035,6 +1141,14 @@ spkr_1_sd_n_active: spkr-1-sd-n-active-state {
};
&tlmm {
+ bt_default: bt-default-state {
+ sw-ctrl-pins {
+ pins = "gpio18";
+ function = "gpio";
+ bias-pull-down;
+ };
+ };
+
wcd_default: wcd-reset-n-active-state {
pins = "gpio101";
function = "gpio";
@@ -1042,6 +1156,31 @@ wcd_default: wcd-reset-n-active-state {
bias-disable;
output-low;
};
+
+ wlan_en: wlan-en-state {
+ pins = "gpio16";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+};
+
+&uart14 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+ max-speed = <3200000>;
+ };
};
&ufs_mem_phy {
--
2.48.1
Powered by blists - more mailing lists