[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <89265de7-eeff-4eea-838b-6a810c069a20@baylibre.com>
Date: Tue, 2 Sep 2025 09:29:04 -0500
From: David Lechner <dlechner@...libre.com>
To: Marilene Andrade Garcia <marilene.agarcia@...il.com>,
linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Cc: Kim Seer Paller <kimseer.paller@...log.com>,
Jonathan Cameron <jic23@...nel.org>, Nuno Sá
<nuno.sa@...log.com>, Andy Shevchenko <andy@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Marcelo Schmitt <marcelo.schmitt1@...il.com>,
Marcelo Schmitt <Marcelo.Schmitt@...log.com>,
Ceclan Dumitru <dumitru.ceclan@...log.com>,
Jonathan Santos <Jonathan.Santos@...log.com>,
Dragos Bogdan <dragos.bogdan@...log.com>
Subject: Re: [PATCH v10 1/2] dt-bindings: iio: adc: add max14001
On 9/2/25 8:15 AM, Marilene Andrade Garcia wrote:
> Add device-tree documentation for MAX14001/MAX14002 ADCs.
> The MAX14001/MAX14002 are isolated, single-channel analog-to-digital
> converters with programmable voltage comparators and inrush current
> control optimized for configurable binary input applications.
When there are multiple devices, DT maintainers like to know
what is the difference between the devices.
>
> Co-developed-by: Marilene Andrade Garcia <marilene.agarcia@...il.com>
> Signed-off-by: Marilene Andrade Garcia <marilene.agarcia@...il.com>
> Signed-off-by: Kim Seer Paller <kimseer.paller@...log.com>
Sine the patch is From: M.A.G., according to [1], this should be:
Co-developed-by: K.S.P.
Signed-off-by: K.S.P.
Signed-off-by: M.A.G.
(hopefully obvious, but don't use the abbreviations - I just did
that for brevity)
[1]: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#when-to-use-acked-by-cc-and-co-developed-by
> ---
> .../bindings/iio/adc/adi,max14001.yaml | 79 +++++++++++++++++++
> MAINTAINERS | 8 ++
> 2 files changed, 87 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml b/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml
> new file mode 100644
> index 000000000000..ff9a41f04300
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2023-2025 Analog Devices Inc.
> +# Copyright 2023 Kim Seer Paller
> +# Copyright 2025 Marilene Andrade Garcia
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/adi,max14001.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices MAX14001-MAX14002 ADC
> +
> +maintainers:
> + - Kim Seer Paller <kimseer.paller@...log.com>
> + - Marilene Andrade Garcia <marilene.agarcia@...il.com>
> +
> +description: |
> + Single channel 10 bit ADC with SPI interface.
> + Datasheet can be found here
> + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX14001-MAX14002.pdf
> +
> +$ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - adi,max14001
> + - adi,max14002
> +
> + reg:
> + maxItems: 1
> +
> + spi-max-frequency:
> + maximum: 5000000
> +
> + vdd-supply:
> + description:
> + Isolated DC-DC power supply input voltage.
> +
> + vddl-supply:
> + description:
> + Logic power supply.
> +
> + vrefin-supply:
The actual pin name is REFIN, so refin-supply would make more sense.
> + description:
> + ADC voltage reference supply.
> +
> + interrupts:
Likely needs `minItems: 1` in case only one interrupt is wired.
> + items:
> + - description: |
> + Interrupt for signaling when conversion results exceed the configured
> + upper threshold for ADC readings or fall below the lower threshold for
> + them. Interrupt source must be attached to COUT pin.
We could shorten these descriptions. The important part is which pin
it is connected to.
> + - description: |
> + Alert output that asserts low during a number of different error
> + conditions. The interrupt source must be attached to FAULT pin.
> +
And also `interrupt-names:` makes sense so we know which one is
is wired if only one is given.
> +required:
> + - compatible
> + - reg
> + - vdd-supply
> + - vddl-supply
> +
Powered by blists - more mailing lists