[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3a9201dc1c8e$affa1c10$0fee5430$@samsung.com>
Date: Wed, 3 Sep 2025 10:23:25 +0530
From: "Alim Akhtar" <alim.akhtar@...sung.com>
To: "'Ram Kumar Dwivedi'" <quic_rdwivedi@...cinc.com>,
<avri.altman@....com>, <bvanassche@....org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>, <mani@...nel.org>,
<James.Bottomley@...senPartnership.com>, <martin.petersen@...cle.com>
Cc: <linux-scsi@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>
Subject: RE: [PATCH V5 2/4] ufs: ufs-qcom: Remove redundant re-assignment to
hs_rate
> -----Original Message-----
> From: Ram Kumar Dwivedi <quic_rdwivedi@...cinc.com>
> Sent: Tuesday, September 2, 2025 10:19 PM
> To: alim.akhtar@...sung.com; avri.altman@....com;
> bvanassche@....org; robh@...nel.org; krzk+dt@...nel.org;
> conor+dt@...nel.org; mani@...nel.org;
> James.Bottomley@...senPartnership.com; martin.petersen@...cle.com
> Cc: linux-scsi@...r.kernel.org; devicetree@...r.kernel.org; linux-
> kernel@...r.kernel.org; linux-arm-msm@...r.kernel.org
> Subject: [PATCH V5 2/4] ufs: ufs-qcom: Remove redundant re-assignment to
> hs_rate
>
> Remove the redundant else block that assigns PA_HS_MODE_B to hs_rate,
> as it is already assigned in ufshcd_init_host_params(). This avoids
> unnecessary reassignment and prevents overwriting hs_rate when it is
> explicitly set to a different value.
>
> Signed-off-by: Ram Kumar Dwivedi <quic_rdwivedi@...cinc.com>
> ---
Better to send non-dependent patches separately.
Feel free to add:
Reviewed-by: Alim Akhtar <alim.akhtar@...sung.com>
> drivers/ufs/host/ufs-qcom.c | 8 ++------
> 1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index
> 9574fdc2bb0f..1a93351fb70e 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -494,12 +494,8 @@ static int ufs_qcom_power_up_sequence(struct
> ufs_hba *hba)
> * If the HS-G5 PHY gear is used, update host_params->hs_rate to
> Rate-A,
> * so that the subsequent power mode change shall stick to Rate-A.
> */
> - if (host->hw_ver.major == 0x5) {
> - if (host->phy_gear == UFS_HS_G5)
> - host_params->hs_rate = PA_HS_MODE_A;
> - else
> - host_params->hs_rate = PA_HS_MODE_B;
> - }
> + if (host->hw_ver.major == 0x5 && host->phy_gear == UFS_HS_G5)
> + host_params->hs_rate = PA_HS_MODE_A;
>
> mode = host_params->hs_rate == PA_HS_MODE_B ?
> PHY_MODE_UFS_HS_B : PHY_MODE_UFS_HS_A;
>
> --
> 2.50.1
Powered by blists - more mailing lists