[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c85a94ee-59e1-47d6-8200-813bb434caf2@prolan.hu>
Date: Wed, 3 Sep 2025 09:43:14 +0200
From: Csókás Bence <csokas.bence@...lan.hu>
To: Ahmad Fatoum <a.fatoum@...gutronix.de>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>, Fabio Estevam
<festevam@...il.com>
CC: <devicetree@...r.kernel.org>, <imx@...ts.linux.dev>, Csaba Buday
<buday.csaba@...lan.hu>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH] ARM: dts: imx6ul-tx6ul: Switch away from deprecated
`phy-reset-gpios`
Hi,
On 2025. 09. 03. 9:28, Ahmad Fatoum wrote:
> Hello,
>
> On 15.08.25 17:17, Bence Csókás wrote:
>> The Ethernet PHY's reset GPIO should be specified in the node of the PHY
>> itself, instead of the MAC (`fec`). The latter is deprecated, and was an
>> i.MX-specific extension, incompatible with the new reset controller
>> subsystem.
>
> One reason to do it this way is that the PHY is in reset when the OS starts
> and the external phy-reset-gpios allows MAC probe to get the PHY out of
> reset, so it can be probed after reading its vendor/device IDs.
>
> Does switching to this new binding address this scenario? If so, it should
> be noted in the commit message.
Yes, but after it has been reset, if the platform supports Power
Management, the PHY's clock will be turned off, which some PHYs (in our
case the LAN8710) don't tolerate. This has been reported many times,
just search LKML for "lan8710 reset".
So we want a more general solution [1] where the PHY subsystem resets
them before enumerating. However, if the MAC driver claims the GPIO,
then it can't be used by the PHY.
I will clarify the commit msg with this in mind.
[1]
https://lore.kernel.org/lkml/20250709133222.48802-4-buday.csaba@prolan.hu/
>>
>> Co-developed-by: Csaba Buday <buday.csaba@...lan.hu>
>> Signed-off-by: Csaba Buday <buday.csaba@...lan.hu>lan8710 reset
>> Signed-off-by: Bence Csókás <csokas.bence@...lan.hu>
>> ---
>> arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi | 8 +++++++-
>> 1 file changed, 7 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
>> index f053358bc9317f8447d65013a18670cb470106b2..0a5e90704ea481b0716d6ff6bc6d2110914d4f31 100644
>> --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
>> +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
>> @@ -246,7 +246,6 @@ &fec1 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
>> phy-mode = "rmii";
>> - phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
>> phy-supply = <®_3v3_etn>;
>> phy-handle = <&etnphy0>;
>> status = "okay";
>> @@ -262,6 +261,13 @@ etnphy0: ethernet-phy@0 {
>> pinctrl-0 = <&pinctrl_etnphy0_int>;
>> interrupt-parent = <&gpio5>;
>> interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
>> + /* Reset SHOULD be a PHY property */
>
> Comment belongs into commit message.
Agreed.
>> + reset-names = "phy";
>> + reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
>> + reset-assert-us = <100>;
>> + reset-deassert-us = <25000>;
>> + /* Energy detect sometimes causes link failures */
>> + smsc,disable-energy-detect;
>
> Unrelated change not described in the commit message.
Oh, this has accidentally made it into here from our DT. Thanks for
spotting it!
> Cheers,
> Ahmad
>
>> status = "okay";
>> };
>>
>>
>> ---
>> base-commit: 0cc53520e68bea7fb80fdc6bdf8d226d1b6a98d9
>> change-id: 20250815-b4-tx6ul-dt-phy-rst-7afc190a6907
>>
>> Best regards,
>
>
Bence
Powered by blists - more mailing lists