linux-kernel - [PATCH v1 2/2] riscv: dts: starfive: jh7110-common: drop mmc post-power-on-delay-ms

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250903101346.861076-3-e@freeshell.de>
Date: Wed,  3 Sep 2025 03:13:36 -0700
From: E Shattow <e@...eshell.de>
To: Conor Dooley <conor@...nel.org>,
	Emil Renner Berthing <kernel@...il.dk>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Paul Walmsley <paul.walmsley@...ive.com>,
	Palmer Dabbelt <palmer@...belt.com>,
	Albert Ou <aou@...s.berkeley.edu>,
	Alexandre Ghiti <alex@...ti.fr>
Cc: linux-kernel@...r.kernel.org,
	linux-riscv@...ts.infradead.org,
	devicetree@...r.kernel.org,
	E Shattow <e@...eshell.de>,
	Hal Feng <hal.feng@...rfivetech.com>
Subject: [PATCH v1 2/2] riscv: dts: starfive: jh7110-common: drop mmc post-power-on-delay-ms

Drop post-power-on-delay-ms from mmc0 mmc1 interfaces. There is no
known reason for these properties to continue, testing appears to be fine
without them [1].

1: https://lore.kernel.org/lkml/NT0PR01MB1312E0D9EE9F158A57B77700E63D2@NT0PR01MB1312.CHNPR01.prod.partner.outlook.cn/

Signed-off-by: E Shattow <e@...eshell.de>
Tested-by: Hal Feng <hal.feng@...rfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index 4fa77ffd54e3..5dc15e48b74b 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -285,7 +285,6 @@ &mmc0 {
 	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	cap-mmc-hw-reset;
-	post-power-on-delay-ms = <200>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&vcc_3v3>;
@@ -302,7 +301,6 @@ &mmc1 {
 	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	cap-sd-highspeed;
-	post-power-on-delay-ms = <200>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	status = "okay";
-- 
2.50.0