[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <lcyori44rm5p35wykk2rb54zbrrpft5c7uibi376jihemkb67w@px3nj72a5hx4>
Date: Thu, 4 Sep 2025 05:21:57 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: syyang <syyang@...tium.com>
Cc: robh@...nel.org, krzk+dt@...nel.org, conor+dt@...nel.org,
andrzej.hajda@...el.com, neil.armstrong@...aro.org, rfoss@...nel.org,
Laurent.pinchart@...asonboard.com, jonas@...boo.se,
jernej.skrabec@...il.com, devicetree@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
yangsunyun1993@...il.com
Subject: Re: [PATCH v1 1/2] This patch adds a new device tree binding
documentation.
On Wed, Sep 03, 2025 at 05:38:24AM -0700, syyang wrote:
> - New device tree binding documentation at
> Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml
>
> Signed-off-by: syyang <syyang@...tium.com>
Please fix your Git setup and use your full name in SoB tag and author
metadata.
> ---
> .../display/bridge/lontium,lt9611c.yaml | 123 ++++++++++++++++++
> 1 file changed, 123 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml
> new file mode 100644
> index 000000000000..e8f204c71a95
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611c.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Lontium LT9611C 2 Port MIPI to HDMI Bridge
> +
> +maintainers:
> + - Rob Herring <robh@...nel.org>
Are you sure?
> +
> +description: |
> + The LT9611C are bridge devices which convert DSI to HDMI
Can't you extend the existing lontium,lt9611.yaml?
> +
> +properties:
> + compatible:
> + enum:
> + - lontium,lt9611c
> + - lontium,lt9611uxd
> +
> + reg:
> + maxItems: 1
> +
> + "#sound-dai-cells":
> + const: 0
> +
> + interrupts:
> + maxItems: 1
> +
> + reset-gpios:
> + maxItems: 1
> + description: GPIO connected to active high RESET pin.
> +
> + vdd-supply:
> + description: Regulator for 1.2V MIPI phy power.
> +
> + vcc-supply:
> + description: Regulator for 3.3V IO power.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Primary MIPI port-1 for MIPI input
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Additional MIPI port-2 for MIPI input, used in combination
> + with primary MIPI port-1 to drive higher resolution displays
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + HDMI port for HDMI output
> +
> + required:
> + - port@0
> + - port@2
All of this totally looks like lontium,lt9611.yaml, except the
vdd-supply voltage difference.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - vdd-supply
> + - vcc-supply
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + i2c10 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + hdmi-bridge@41 {
> + compatible = "lontium,lt9611c";
> + reg = <0x41>;
> + #sound-dai-cells = <0>;
> + interrupts-extended = <&pio 128 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&pio 127 GPIO_ACTIVE_HIGH>;
> + vdd-supply = <<9611_1v2>;
> + vcc-supply = <<9611_3v3>;
> + dsi-lanes = <4>;
> + status = "okay";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + lt9611_a: endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + lt9611_b: endpoint {
> + remote-endpoint = <&dsi1_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> + lt9611_out: endpoint {
> + remote-endpoint = <&hdmi_con>;
> + };
> + };
> + };
> + };
> + };
> +
> +...
> +
> --
> 2.25.1
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists