[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250905135547.934729-1-antonio.borneo@foss.st.com>
Date: Fri, 5 Sep 2025 15:55:38 +0200
From: Antonio Borneo <antonio.borneo@...s.st.com>
To: Linus Walleij <linus.walleij@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue
<alexandre.torgue@...s.st.com>,
Bartosz Golaszewski <brgl@...ev.pl>, <linux-gpio@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>
CC: Antonio Borneo <antonio.borneo@...s.st.com>,
Christophe Roullier
<christophe.roullier@...s.st.com>,
Fabien Dessenne
<fabien.dessenne@...s.st.com>,
Valentin Caron <valentin.caron@...s.st.com>
Subject: [PATCH v2 0/9] pinctrl: stm32: Support I/O synchronization
This v2 is a subset of the v1, split-out to simplify the review.
The old patches concerned in v1 where 05/14, 06/14 and 07/14.
This subset:
- introduces the generic pinctrl property "skew-delay-direction", as
suggested by Linus Walleij;
- applies some cleanup to STM32 pinctrl driver to simplify the following
commits in the series;
- adds support for the I/O synchronization in STM32 pinctrl driver and
bindings;
- updates the DT for STM32MP25 pinctrl to use the new properties.
Changes v1 -> v2 subset:
- rebased on v6.17-rc1;
- replace ST property "st,io-delay" with generic "skew-delay";
- replace ST property "st,io-delay-path" with generic "skew-delay-direction";
- collapse the other ST property in a single "st,io-sync";
- Link to v1: https://lore.kernel.org/lkml/20241022155658.1647350-1-antonio.borneo@foss.st.com/
Antonio Borneo (9):
pinctrl: pinconf-generic: Add property "skew-delay-direction"
dt-bindings: pincfg-node: Add property "skew-delay-direction"
pinctrl: stm32: Rework stm32_pconf_parse_conf()
pinctrl: stm32: Simplify handling of backup pin status
pinctrl: stm32: Drop useless spinlock save and restore
pinctrl: stm32: Avoid keeping a bool value in a u32 variable
pinctrl: stm32: Support I/O synchronization parameters
dt-bindings: pinctrl: stm32: Support I/O synchronization parameters
arm64: dts: st: Add I/O sync to eth2 pinctrl in stm32mp25-pinctrl.dtsi
.../bindings/pinctrl/pincfg-node.yaml | 13 +-
.../bindings/pinctrl/st,stm32-pinctrl.yaml | 92 +++++
arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 2 +
drivers/pinctrl/pinconf-generic.c | 2 +
drivers/pinctrl/stm32/pinctrl-stm32.c | 337 ++++++++++++++----
drivers/pinctrl/stm32/pinctrl-stm32.h | 1 +
drivers/pinctrl/stm32/pinctrl-stm32mp257.c | 2 +
include/linux/pinctrl/pinconf-generic.h | 6 +
8 files changed, 378 insertions(+), 77 deletions(-)
base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585
--
2.34.1
Powered by blists - more mailing lists