[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <46842d4cf2c1149bd64188f94c60ce5e4f3b2beb.1757001160.git.Jonathan.Santos@analog.com>
Date: Fri, 5 Sep 2025 06:49:11 -0300
From: Jonathan Santos <Jonathan.Santos@...log.com>
To: <linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: Jonathan Santos <Jonathan.Santos@...log.com>, <lars@...afoo.de>,
<jic23@...nel.org>, <dlechner@...libre.com>, <nuno.sa@...log.com>,
<andy@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <marcelo.schmitt1@...il.com>,
<jonath4nns@...il.com>
Subject: [PATCH v3 1/4] dt-bindings: iio: adc: ad7768-1: add new supported parts
Add compatibles for supported parts in the ad7768-1 family:
ADAQ7767-1, ADAQ7768-1 and ADAQ7769-1
Add property and checks for AFF gain, supported by ADAQ7767-1
and ADAQ7769-1 parts:
adi,aaf-gain-bp
Signed-off-by: Jonathan Santos <Jonathan.Santos@...log.com>
---
v3 Changes:
* Renamed adi,gain-milli to adi,aaf-gain-bp. Now it represents basis points
(one hundredth of a percent) as suggested by Krzysztof. Description was
adjusted.
Note: permille (1/1000) was also suggested as unit for this property.
v2 Changes:
* adi,aaf-gain property renamed to adi,gain-milli. Description was
simplified.
* default value add to adi,gain-milli.
---
.../bindings/iio/adc/adi,ad7768-1.yaml | 44 +++++++++++++++++--
1 file changed, 40 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
index c06d0fc791d3..c2ad8e585586 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -4,18 +4,26 @@
$id: http://devicetree.org/schemas/iio/adc/adi,ad7768-1.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Analog Devices AD7768-1 ADC device driver
+title: Analog Devices AD7768-1 ADC family
maintainers:
- Michael Hennerich <michael.hennerich@...log.com>
description: |
- Datasheet at:
- https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf
+ Analog Devices AD7768-1 24-Bit Single Channel Low Power sigma-delta ADC family
+
+ https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/adaq7767-1.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/adaq7768-1.pdf
+ https://www.analog.com/media/en/technical-documentation/data-sheets/adaq7769-1.pdf
properties:
compatible:
- const: adi,ad7768-1
+ enum:
+ - adi,ad7768-1
+ - adi,adaq7767-1
+ - adi,adaq7768-1
+ - adi,adaq7769-1
reg:
maxItems: 1
@@ -58,6 +66,19 @@ properties:
description:
ADC reference voltage supply
+ adi,aaf-gain-bp:
+ description: |
+ Specifies the gain applied by the Analog Anti-Aliasing Filter (AAF)
+ to the ADC input in basis points (one hundredth of a percent).
+ The hardware gain is determined by which input pin(s) the signal goes
+ through into the AAF. The possible connections are:
+ * For the ADAQ7767-1: Input connected to IN1±, IN2± or IN3±.
+ * For the ADAQ7769-1: OUT_PGA pin connected to IN1_AAF+, IN2_AAF+,
+ or IN3_AAF+.
+ $ref: /schemas/types.yaml#/definitions/uint16
+ enum: [1430, 3640, 10000]
+ default: 10000
+
adi,sync-in-gpios:
maxItems: 1
description:
@@ -147,6 +168,21 @@ patternProperties:
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
+ # AAF Gain property only applies to ADAQ7767-1 and ADAQ7769-1 devices
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,adaq7767-1
+ - adi,adaq7769-1
+ then:
+ required:
+ - adi,aaf-gain-bp
+ else:
+ properties:
+ adi,aaf-gain-bp: false
+
unevaluatedProperties: false
examples:
--
2.34.1
Powered by blists - more mailing lists