| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250905190931.27481-2-ghatto404@gmail.com>
Date: Fri, 5 Sep 2025 19:09:29 +0000
From: Eric Gonçalves <ghatto404@...il.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Eric Gonçalves <ghatto404@...il.com>
Subject: [PATCH v1 1/3] arm64: dts: qcom: sm8250-samsung-r8q: Move common parts to dtsi
Move common parts of the device tree to a separate dtsi in preparation for
adding other Samsung devices from the S20, Tab S7 or Note 20 families,
creating sm8250-samsung-common.dtsi. Also add support for UFS, USB and
GPIO keys.
Signed-off-by: Eric Gonçalves <ghatto404@...il.com>
---
.../boot/dts/qcom/sm8250-samsung-common.dtsi | 204 ++++++++++++++++++
.../boot/dts/qcom/sm8250-samsung-r8q.dts | 42 ++--
2 files changed, 217 insertions(+), 29 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
new file mode 100644
index 000000000000..96662bf9e527
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@...00000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0x9c000000 0x0 0x2300000>;
+ width = <1080>;
+ height = <2400>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vol_up_n>;
+
+ key-vol-up {
+ label = "Volume Up";
+ gpios = <&pm8150_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ reserved-memory {
+ cont_splash_mem: memory@...00000 {
+ reg = <0x0 0x9c000000 0x0 0x2300000>;
+ no-map;
+ };
+
+ ramoops@...00000 {
+ compatible = "ramoops";
+ reg = <0x0 0x9fa00000 0x0 0x100000>;
+ record-size = <0x4000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x40000>;
+ pmsg-size = <0x40000>;
+ no-map;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vreg_s4a_1p8: smps4 {
+ regulator-name = "vreg_s4a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2a_3p1: ldo2 {
+ regulator-name = "vreg_l2a_3p1";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a_0p88: ldo5 {
+ regulator-name = "vreg_l5a_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_1p2: ldo6 {
+ regulator-name = "vreg_l6a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a_1p2: ldo9 {
+ regulator-name = "vreg_l9a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_3p0: ldo17 {
+ regulator-name = "vreg_l17a_3p0";
+ regulator-min-microvolt = <2496000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&pm8150_gpios {
+ vol_up_n: vol-up-n-state {
+ pins = "gpio3";
+ function = "normal";
+ power-source = <0>;
+ input-enable;
+ bias-pull-up;
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <40 4>; /* I2C (Unused) */
+};
+
+&usb_1 {
+ /* Limit to USB 2.0 for now */
+ qcom,select-utmi-as-pipe-clk;
+
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+ /* Remove USB3 phy */
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&vreg_l5a_0p88>;
+ vdda18-supply = <&vreg_l12a_1p8>;
+ vdda33-supply = <&vreg_l2a_3p1>;
+
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ vcc-supply = <&vreg_l17a_3p0>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l6a_1p2>;
+ vccq-max-microamp = <800000>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+ vccq2-max-microamp = <800000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l5a_0p88>;
+ vdda-pll-supply = <&vreg_l9a_1p2>;
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts b/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
index 131d1edc2ad4..415119a14856 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
@@ -2,41 +2,25 @@
/dts-v1/;
-#include "sm8250.dtsi"
+#include "sm8250-samsung-common.dtsi"
/ {
model = "Samsung Galaxy S20 FE";
compatible = "samsung,r8q", "qcom,sm8250";
chassis-type = "handset";
+};
- chosen {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- framebuffer: framebuffer@...00000 {
- compatible = "simple-framebuffer";
- reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
- width = <1080>;
- height = <2400>;
- stride = <(1080 * 4)>;
- format = "a8r8g8b8";
- };
- };
+&adsp {
+ firmware-name = "qcom/sm8250/Samsung/r8q/adsp.mbn";
+ status = "okay";
+};
- reserved-memory {
- cont_splash_mem: memory@...00000 {
- reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
- no-map;
- };
+&cdsp {
+ firmware-name = "qcom/sm8250/Samsung/r8q/cdsp.mbn";
+ status = "okay";
+};
- pstore_mem: ramoops@...00000 {
- compatible = "ramoops";
- reg = <0x0 0x9fa00000 0x0 0x100000>;
- record-size = <0x4000>;
- console-size = <0x40000>;
- ftrace-size = <0x40000>;
- pmsg-size = <0x40000>;
- };
- };
+&slpi {
+ firmware-name = "qcom/sm8250/Samsung/r8q/slpi.mbn";
+ status = "okay";
};
--
2.50.1
Powered by blists - more mailing lists