[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3f563a3f-08ac-449c-9d55-2537f67cea7b@oss.qualcomm.com>
Date: Fri, 5 Sep 2025 14:02:24 +0800
From: Yijie Yang <yijie.yang@....qualcomm.com>
To: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
Cc: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley
<conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Subject: Re: [PATCH v9 2/3] arm64: dts: qcom: Add HAMOA-IOT-SOM platform
On 2025-09-04 21:52, Dmitry Baryshkov wrote:
> On Thu, Sep 04, 2025 at 03:48:33PM +0800, Yijie Yang wrote:
>> The HAMOA-IOT-SOM is a compact computing module that integrates a System
>> on Chip (SoC) — specifically the x1e80100 — along with essential
>> components optimized for IoT applications. It is designed to be mounted on
>> carrier boards, enabling the development of complete embedded systems.
>>
>> This change enables the following components:
>
> Documentation/process/submitting-patches.rst, "[This patch] makes xyzzy
> do frot".
Will update.
>
>> - Regulators on the SOM
>> - Reserved memory regions
>> - PCIe6a and its PHY
>> - PCIe4 and its PHY
>> - USB0 through USB6 and their PHYs
>> - ADSP, CDSP
>> - WLAN, Bluetooth (M.2 interface)
>
> No, you don't. WiFi and BT are not present on the SoM.
Will update.
>
>>
>> Written in collaboration with Yingying Tang (PCIe4 and WLAN)
>> <quic_yintang@...cinc.com>.
>
> Co-developed-by, Signed-off-by.
>
>>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
>> Signed-off-by: Yijie Yang <yijie.yang@....qualcomm.com>
>> ---
>> arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi | 609 ++++++++++++++++++++++++++++
>> 1 file changed, 609 insertions(+)
>
>> +
>> +&usb_1_ss0 {
>> + status = "okay";
>> +};
>> +
>> +&usb_1_ss0_dwc3 {
>> + dr_mode = "otg";
>> + usb-role-switch;
>
> Please check with Johan or any other X1E8 developers and make this into
> a platform default.
Sure.
>
>> +};
>> +
>> +&usb_1_ss0_hsphy {
>> + vdd-supply = <&vreg_l3j_0p8>;
>> + vdda12-supply = <&vreg_l2j_1p2>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&usb_1_ss0_qmpphy {
>> + vdda-phy-supply = <&vreg_l2j_1p2>;
>> + vdda-pll-supply = <&vreg_l1j_0p8>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&usb_1_ss1 {
>> + status = "okay";
>> +};
>> +
>> +&usb_1_ss1_dwc3 {
>> + dr_mode = "otg";
>> + usb-role-switch;
>> +};
>> +
>
> The same.
>
--
Best Regards,
Yijie
Powered by blists - more mailing lists