lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20250905094325.472473-1-h-shenoy@ti.com>
Date: Fri, 5 Sep 2025 15:13:25 +0530
From: Harikrishna Shenoy <h-shenoy@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
        <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <devarsht@...com>, <u-kumar1@...com>,
        <s-jain1@...com>
Subject: [PATCH v3] arm64: dts: ti: k3-j721e-main: Add DSI and DPHY-TX

From: Rahul T R <r-ravikumar@...com>

TI's J721E SoC supports a DPI to DSI video signal conversion bridge on
it's platform bus. The IP is from Cadence, and it has a custom TI
wrapper around it to facilitate integration.

This IP takes the DPI video signals from DSS and alongwith the DPHY IP,
it transmits DSI video signals out of the SoC.

Add support for DSI bridge and the DPHY-TX.

Signed-off-by: Rahul T R <r-ravikumar@...com>
Signed-off-by: Jayesh Choudhary <j-choudhary@...com>
Signed-off-by: Harikrishna Shenoy <h-shenoy@...com>
---
Changelog v2 -> v3:
-Add dsi ports.
-Revert to phy lablels used in v1.

Link to v1- https://lore.kernel.org/all/20250822124622.1424473-1-h-shenoy@ti.com/
Link to v2- https://lore.kernel.org/all/20250904105915.3043773-1-h-shenoy@ti.com/
 
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 39 +++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index ab3666ff4297..78fde982aff0 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1887,6 +1887,45 @@ port@4 {
 		};
 	};
 
+	dphy2: phy@...0000 {
+		compatible = "ti,j721e-dphy";
+		reg = <0x00 0x04480000 0x00 0x1000>;
+		clocks = <&k3_clks 296 1>, <&k3_clks 296 3>;
+		clock-names = "psm", "pll_ref";
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 296 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 296 3>;
+		assigned-clock-parents = <&k3_clks 296 4>;
+		assigned-clock-rates = <19200000>;
+		status = "disabled";
+	};
+
+	dsi0: dsi@...0000 {
+		compatible = "ti,j721e-dsi";
+		reg = <0x00 0x04800000 0x00 0x100000>, <0x00 0x04710000 0x00 0x100>;
+		clocks = <&k3_clks 150 1>, <&k3_clks 150 5>;
+		clock-names = "dsi_p_clk", "dsi_sys_clk";
+		power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&dphy2>;
+		phy-names = "dphy";
+		status = "disabled";
+
+		dsi0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	dss: dss@...0000 {
 		compatible = "ti,j721e-dss";
 		reg =
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ