| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<TY7PR01MB14818C811C01699A6469CA307CD0CA@TY7PR01MB14818.jpnprd01.prod.outlook.com>
Date: Mon, 8 Sep 2025 01:01:04 +0000
From: <nobuhiro.iwamatsu.x90@...l.toshiba>
To: <Frank.li@....com>
CC: <robh@...nel.org>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<lpieralisi@...nel.org>, <kwilczynski@...nel.org>, <mani@...nel.org>,
<bhelgaas@...gle.com>, <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-pci@...r.kernel.org>, <yuji2.ishikawa@...hiba.co.jp>
Subject: RE: [PATCH v2 1/2] arm64: dts: toshiba: Update SoC and PCIe ranges to
reflect hardware behavior
> -----Original Message-----
> From: Frank Li <Frank.li@....com>
> Sent: Wednesday, August 6, 2025 1:45 AM
> To: iwamatsu nobuhiro(岩松 信洋 □ＤＩＴＣ○ＣＰＴ)
> <nobuhiro1.iwamatsu@...hiba.co.jp>
> Cc: robh@...nel.org; krzk+dt@...nel.org; conor+dt@...nel.org;
> lpieralisi@...nel.org; kwilczynski@...nel.org; mani@...nel.org;
> bhelgaas@...gle.com; linux-arm-kernel@...ts.infradead.org;
> devicetree@...r.kernel.org; linux-kernel@...r.kernel.org;
> linux-pci@...r.kernel.org; ishikawa yuji(石川 悠司 □ＡＩＤＣ○ＥＡ開)
> <yuji2.ishikawa@...hiba.co.jp>
> Subject: Re: [PATCH v2 1/2] arm64: dts: toshiba: Update SoC and PCIe ranges
> to reflect hardware behavior
>
> On Tue, Aug 05, 2025 at 10:47:00AM +0900, Nobuhiro Iwamatsu wrote:
> > From: Frank Li <Frank.Li@....com>
> >
> > tmpv7708 trim address bit[31:30] in tmpv7708 before passing to the
> > PCIe controller. Since only PCIe controller needs to convert the
> > address range
> > 0x40000000 - 0x80000000, add a bus definition, describe the ranges in
> > it, and move the PCIe definition.
> >
> > Prepare for the removal of the driver’s cpu_addr_fixup().
> >
> > Signed-off-by: Frank Li <Frank.Li@....com>
> > Suggested-by: Yuji Ishikawa <yuji2.ishikawa@...hiba.co.jp>
> > Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@...hiba.co.jp>
> > ---
> > v2:
> > Update commit message.
> > Fix range.
> > Set true to use_parent_dt_ranges in pcie-visconti.c.
> > move pcie under the dedicated sub-bus.
> >
> > arch/arm64/boot/dts/toshiba/tmpv7708.dtsi | 75
> > +++++++++++++--------- drivers/pci/controller/dwc/pcie-visconti.c
> |
> > 2 +
> > 2 files changed, 47 insertions(+), 30 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
> > b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
> > index 39806f0ae5133..b754965a76ca6 100644
> > --- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
> > +++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
> > @@ -478,37 +478,52 @@ pwm: pwm@...c0000 {
> > status = "disabled";
> > };
> >
> > - pcie: pcie@...00000 {
> > - compatible = "toshiba,visconti-pcie";
> > - reg = <0x0 0x28400000 0x0 0x00400000>,
> > - <0x0 0x70000000 0x0 0x10000000>,
> > - <0x0 0x28050000 0x0 0x00010000>,
> > - <0x0 0x24200000 0x0 0x00002000>,
> > - <0x0 0x24162000 0x0 0x00001000>;
> > - reg-names = "dbi", "config", "ulreg", "smu", "mpu";
> > - device_type = "pci";
> > - bus-range = <0x00 0xff>;
> > - num-lanes = <2>;
> > - num-viewport = <8>;
> > -
> > - #address-cells = <3>;
> > + pcie_bus: bus@...00000 {
> > + compatible = "simple-bus";
> > + #address-cells = <2>;
> > #size-cells = <2>;
> > - #interrupt-cells = <1>;
> > - ranges = <0x81000000 0 0x40000000 0 0x40000000 0
> 0x00010000
> > - 0x82000000 0 0x50000000 0 0x50000000 0
> 0x20000000>;
> > - interrupts = <GIC_SPI 211
> IRQ_TYPE_LEVEL_HIGH>,
> > - <GIC_SPI 215
> IRQ_TYPE_LEVEL_HIGH>;
> > - interrupt-names = "msi", "intr";
> > - interrupt-map-mask = <0 0 0 7>;
> > - interrupt-map =
> > - <0 0 0 1 &gic GIC_SPI 215
> IRQ_TYPE_LEVEL_HIGH
> > - 0 0 0 2 &gic GIC_SPI 215
> IRQ_TYPE_LEVEL_HIGH
> > - 0 0 0 3 &gic GIC_SPI 215
> IRQ_TYPE_LEVEL_HIGH
> > - 0 0 0 4 &gic GIC_SPI 215
> IRQ_TYPE_LEVEL_HIGH>;
> > - max-link-speed = <2>;
> > - clocks = <&extclk100mhz>, <&pismu
> TMPV770X_CLK_PCIE_MSTR>, <&pismu TMPV770X_CLK_PCIE_AUX>;
> > - clock-names = "ref", "core", "aux";
> > - status = "disabled";
> > + ranges = /* register 1:1 map */
> > + <0x0 0x24000000 0x0 0x24000000 0x0
> 0x0C000000>,
> > + /*
> > + * bus fabric mask address bit 30 and 31 to 0
> > + * before send to PCIe controller.
> > + *
> > + * PCIe map address 0 to cpu's 0x40000000
> > + */
> > + <0x0 0x00000000 0x0 0x40000000 0x0
> 0x40000000>;
> > +
> > + pcie: pcie@...00000 {
> > + compatible = "toshiba,visconti-pcie";
> > + reg = <0x0 0x28400000 0x0 0x00400000>,
> > + <0x0 0x30000000 0x0 0x10000000>,
> > + <0x0 0x28050000 0x0 0x00010000>,
> > + <0x0 0x24200000 0x0 0x00002000>,
> > + <0x0 0x24162000 0x0 0x00001000>;
> > + reg-names = "dbi", "config", "ulreg", "smu",
> "mpu";
> > + device_type = "pci";
> > + bus-range = <0x00 0xff>;
> > + num-lanes = <2>;
> > + num-viewport = <8>;
> > +
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + #interrupt-cells = <1>;
> > + ranges = <0x81000000 0 0x00000000 0
> 0x00000000 0 0x00010000
> > + 0x82000000 0 0x10000000 0
> 0x10000000 0 0x20000000>;
> > + interrupts = <GIC_SPI 211
> IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 215
> IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "msi", "intr";
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map =
> > + <0 0 0 1 &gic GIC_SPI 215
> IRQ_TYPE_LEVEL_HIGH
> > + 0 0 0 2 &gic GIC_SPI 215
> IRQ_TYPE_LEVEL_HIGH
> > + 0 0 0 3 &gic GIC_SPI 215
> IRQ_TYPE_LEVEL_HIGH
> > + 0 0 0 4 &gic GIC_SPI 215
> IRQ_TYPE_LEVEL_HIGH>;
> > + max-link-speed = <2>;
> > + clocks = <&extclk100mhz>, <&pismu
> TMPV770X_CLK_PCIE_MSTR>, <&pismu TMPV770X_CLK_PCIE_AUX>;
> > + clock-names = "ref", "core", "aux";
> > + status = "disabled";
> > + };
> > };
> > };
> > };
> > diff --git a/drivers/pci/controller/dwc/pcie-visconti.c
> > b/drivers/pci/controller/dwc/pcie-visconti.c
> > index cdeac6177143c..2a724ab587f78 100644
> > --- a/drivers/pci/controller/dwc/pcie-visconti.c
> > +++ b/drivers/pci/controller/dwc/pcie-visconti.c
> > @@ -310,6 +310,8 @@ static int visconti_pcie_probe(struct
> > platform_device *pdev)
> >
> > platform_set_drvdata(pdev, pcie);
> >
> > + pci->use_parent_dt_ranges = true;
> > +
>
> This change belong to PATCH 2. It still works with old driver after add pci-bus
> in dts, just a warning will print.
Thanks for your review.
I see. I will fix and resed.
>
> Frank
Best regards,
Nobuhiro
Powered by blists - more mailing lists