[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aMGdH7Ab+9t/v3CB@lizhi-Precision-Tower-5810>
Date: Wed, 10 Sep 2025 11:45:35 -0400
From: Frank Li <Frank.li@....com>
To: Andreas Kemnade <akemnade@...nel.org>
Cc: Lee Jones <lee@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Alistair Francis <alistair@...stair23.me>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 1/3] dt-bindings: mfd: sy7636a: Add missing gpio pins
and supply
On Tue, Sep 09, 2025 at 10:33:02PM +0200, Andreas Kemnade wrote:
> To be able to fully describe how the SY7636A is connected to the system,
> add properties for the EN and VCOM_EN pins. To squeeze out every bit
> of unused current, in many devices it is possible to power off the
> complete chip. Add an input regulator to allow that.
>
> Signed-off-by: Andreas Kemnade <akemnade@...nel.org>
> ---
> .../devicetree/bindings/mfd/silergy,sy7636a.yaml | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
> index ee0be32ac0204..054b97dd0c5c7 100644
> --- a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
> +++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
> @@ -32,6 +32,22 @@ properties:
> Specifying the power good GPIOs.
> maxItems: 1
>
> + enable-gpios:
> + description:
> + If EN pin is not hardwired, specify it here to have it set up.
Need descript function of enabel-gpios, you can ref data sheet sy7636a.
"enable-gpios" is good self documented by property name, needn't
description at all.
> + maxItems: 1
> +
> + vcom-en-gpios:
> + description:
> + If VCOM_EN pin is not hardwired, specify it here to have it set up.
> + maxItems: 1
> +
> + vin-supply:
> + description:
> + Supply for the chip. Some vendor kernels and devicetrees declare this
> + as a GPIO named "pwrall" which does not exist in the datasheet,
> + disabling it makes the chip disappear on the bus.
> +
The same here, descript function. such as power supply for whole chip.
Frank
> regulators:
> type: object
>
>
> --
> 2.39.5
>
Powered by blists - more mailing lists