| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250910204309.20751-1-james.morse@arm.com>
Date: Wed, 10 Sep 2025 20:42:40 +0000
From: James Morse <james.morse@....com>
To: linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-acpi@...r.kernel.org
Cc: James Morse <james.morse@....com>,
D Scott Phillips OS <scott@...amperecomputing.com>,
carl@...amperecomputing.com,
lcherian@...vell.com,
bobo.shaobowang@...wei.com,
tan.shaopeng@...itsu.com,
baolin.wang@...ux.alibaba.com,
Jamie Iles <quic_jiles@...cinc.com>,
Xin Hao <xhao@...ux.alibaba.com>,
peternewman@...gle.com,
dfustini@...libre.com,
amitsinght@...vell.com,
David Hildenbrand <david@...hat.com>,
Dave Martin <dave.martin@....com>,
Koba Ko <kobak@...dia.com>,
Shanker Donthineni <sdonthineni@...dia.com>,
fenghuay@...dia.com,
baisheng.gao@...soc.com,
Jonathan Cameron <jonathan.cameron@...wei.com>,
Rob Herring <robh@...nel.org>,
Rohit Mathew <rohit.mathew@....com>,
Rafael Wysocki <rafael@...nel.org>,
Len Brown <lenb@...nel.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Hanjun Guo <guohanjun@...wei.com>,
Sudeep Holla <sudeep.holla@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Danilo Krummrich <dakr@...nel.org>
Subject: [PATCH v2 00/29] arm_mpam: Add basic mpam driver
Hello,
The major changes since v1 are:
* DT got ripped out - see below.
* The mon_sel locking was simplified - but that will come back.
Otherwise the myriad of changes are noted on each patch.
~
This is just enough MPAM driver for ACPI. DT got ripped out. If you need DT
support - please share your DTS so the DT folk know the binding is what is
needed.
This doesn't contain any of the resctrl code, meaning you can't actually drive it
from user-space yet. Becuase of that, its hidden behind CONFIG_EXPERT.
This will change once the user interface is connected up.
This is the initial group of patches that allows the resctrl code to be built
on top. Including that will increase the number of trees that may need to
coordinate, so breaking it up make sense.
The locking got simplified, but is still strange - this is because of the 'mpam-fb'
firmware interface specification that is still alpha. That thing needs to wait for
an interrupt after every system register write, which significantly impacts the
driver. Some features just won't work, e.g. reading the monitor registers via
perf.
I've not found a platform that can test all the behaviours around the monitors,
so this is where I'd expect the most bugs.
The MPAM spec that describes all the system and MMIO registers can be found here:
https://developer.arm.com/documentation/ddi0598/db/?lang=en
(Ignored the 'RETIRED' warning - that is just arm moving the documentation around.
This document has the best overview)
The expectation is this will go via the arm64 tree.
This series is based on v6.17-rc4, and can be retrieved from:
https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git mpam/driver/v2
The rest of the driver can be found here:
https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git mpam/snapshot/v6.17-rc4
What is MPAM? Set your time-machine to 2020:
https://lore.kernel.org/lkml/20201030161120.227225-1-james.morse@arm.com/
This series was previously posted here:
[v1] lore.kernel.org/r/20250822153048.2287-1-james.morse@....com
[RFC] lore.kernel.org/r/20250711183648.30766-2-james.morse@....com
Bugs welcome,
Thanks,
James Morse (27):
ACPI / PPTT: Add a helper to fill a cpumask from a processor container
ACPI / PPTT: Stop acpi_count_levels() expecting callers to clear
levels
ACPI / PPTT: Find cache level by cache-id
ACPI / PPTT: Add a helper to fill a cpumask from a cache_id
arm64: kconfig: Add Kconfig entry for MPAM
ACPI / MPAM: Parse the MPAM table
arm_mpam: Add probe/remove for mpam msc driver and kbuild boiler plate
arm_mpam: Add the class and component structures for firmware
described ris
arm_mpam: Add MPAM MSC register layout definitions
arm_mpam: Add cpuhp callbacks to probe MSC hardware
arm_mpam: Probe hardware to find the supported partid/pmg values
arm_mpam: Add helpers for managing the locking around the mon_sel
registers
arm_mpam: Probe the hardware features resctrl supports
arm_mpam: Merge supported features during mpam_enable() into
mpam_class
arm_mpam: Reset MSC controls from cpu hp callbacks
arm_mpam: Add a helper to touch an MSC from any CPU
arm_mpam: Extend reset logic to allow devices to be reset any time
arm_mpam: Register and enable IRQs
arm_mpam: Use a static key to indicate when mpam is enabled
arm_mpam: Allow configuration to be applied and restored during cpu
online
arm_mpam: Probe and reset the rest of the features
arm_mpam: Add helpers to allocate monitors
arm_mpam: Add mpam_msmon_read() to read monitor value
arm_mpam: Track bandwidth counter state for overflow and power
management
arm_mpam: Add helper to reset saved mbwu state
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add kunit tests for props_mismatch()
Rohit Mathew (2):
arm_mpam: Probe for long/lwd mbwu counters
arm_mpam: Use long MBWU counters if supported
arch/arm64/Kconfig | 25 +
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/acpi/arm64/Kconfig | 3 +
drivers/acpi/arm64/Makefile | 1 +
drivers/acpi/arm64/mpam.c | 361 ++++
drivers/acpi/pptt.c | 224 ++-
drivers/acpi/tables.c | 2 +-
drivers/resctrl/Kconfig | 24 +
drivers/resctrl/Makefile | 4 +
drivers/resctrl/mpam_devices.c | 2668 +++++++++++++++++++++++++++
drivers/resctrl/mpam_internal.h | 676 +++++++
drivers/resctrl/test_mpam_devices.c | 389 ++++
include/linux/acpi.h | 26 +
include/linux/arm_mpam.h | 58 +
15 files changed, 4455 insertions(+), 9 deletions(-)
create mode 100644 drivers/acpi/arm64/mpam.c
create mode 100644 drivers/resctrl/Kconfig
create mode 100644 drivers/resctrl/Makefile
create mode 100644 drivers/resctrl/mpam_devices.c
create mode 100644 drivers/resctrl/mpam_internal.h
create mode 100644 drivers/resctrl/test_mpam_devices.c
create mode 100644 include/linux/arm_mpam.h
--
2.39.5
Powered by blists - more mailing lists