linux-kernel - [PATCH] drm/amd/display: Only restore backlight after amdgpu_dm_init or dm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250910212753.3167295-1-matthew.schwartz@linux.dev>
Date: Wed, 10 Sep 2025 14:27:53 -0700
From: Matthew Schwartz <matthew.schwartz@...ux.dev>
To: chiahsuan.chung@....com,
	alexander.deucher@....com,
	harry.wentland@....com,
	simona@...ll.ch,
	airlied@...il.com,
	sunpeng.li@....com
Cc: amd-gfx@...ts.freedesktop.org,
	zaeem.mohamed@....com,
	mario.limonciello@....com,
	misyl@...ggi.es,
	linux-kernel@...r.kernel.org,
	Matthew Schwartz <matthew.schwartz@...ux.dev>
Subject: [PATCH] drm/amd/display: Only restore backlight after amdgpu_dm_init or dm_resume

On clients that utilize AMD_PRIVATE_COLOR properties for HDR support,
brightness sliders can include a hardware controlled portion and a
gamma-based portion. This is the case on the Steam Deck OLED when using
gamescope with Steam as a client.

When a user sets a brightness level while HDR is active, the gamma-based
portion and/or hardware portion are adjusted to achieve the desired
brightness. However, when a modeset takes place while the gamma-based
portion is in-use, restoring the hardware brightness level overrides the
user's overall brightness level and results in a mismatch between what
the slider reports and the display's current brightness.

To avoid overriding gamma-based brightness, only restore HW backlight
level after boot or resume. This ensures that the backlight level is
set correctly after the DC layer resets it while avoiding interference
with subsequent modesets.

Fixes: 7875afafba84 ("drm/amd/display: Fix brightness level not retained over reboot")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4551
Signed-off-by: Matthew Schwartz <matthew.schwartz@...ux.dev>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 11 +++++++++--
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h |  7 +++++++
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 7808a647a306c..3651315760759 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -2037,6 +2037,8 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 
 	dc_hardware_init(adev->dm.dc);
 
+	adev->dm.restore_backlight = true;
+
 	adev->dm.hpd_rx_offload_wq = hpd_rx_irq_create_workqueue(adev);
 	if (!adev->dm.hpd_rx_offload_wq) {
 		drm_err(adev_to_drm(adev), "failed to create hpd rx offload workqueue.\n");
@@ -3407,6 +3409,7 @@ static int dm_resume(struct amdgpu_ip_block *ip_block)
 		dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D0);
 
 		dc_resume(dm->dc);
+		adev->dm.restore_backlight = true;
 
 		amdgpu_dm_irq_resume_early(adev);
 
@@ -9922,7 +9925,8 @@ static void amdgpu_dm_commit_streams(struct drm_atomic_state *state,
 			acrtc->hw_mode = new_crtc_state->mode;
 			crtc->hwmode = new_crtc_state->mode;
 			mode_set_reset_required = true;
-			set_backlight_level = true;
+			if (dm->restore_backlight)
+				set_backlight_level = true;
 		} else if (modereset_required(new_crtc_state)) {
 			drm_dbg_atomic(dev,
 				       "Atomic commit: RESET. crtc id %d:[%p]\n",
@@ -9979,13 +9983,16 @@ static void amdgpu_dm_commit_streams(struct drm_atomic_state *state,
 	 * to fix a flicker issue.
 	 * It will cause the dm->actual_brightness is not the current panel brightness
 	 * level. (the dm->brightness is the correct panel level)
-	 * So we set the backlight level with dm->brightness value after set mode
+	 * So we set the backlight level with dm->brightness value after initial
+	 * set mode. Use restore_backlight flag to avoid setting backlight level
+	 * for every subsequent mode set.
 	 */
 	if (set_backlight_level) {
 		for (i = 0; i < dm->num_of_edps; i++) {
 			if (dm->backlight_dev[i])
 				amdgpu_dm_backlight_set_level(dm, i, dm->brightness[i]);
 		}
+		dm->restore_backlight = false;
 	}
 }
 
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
index b937da0a4e4a0..6aae51c1beb36 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h
@@ -610,6 +610,13 @@ struct amdgpu_display_manager {
 	 */
 	u32 actual_brightness[AMDGPU_DM_MAX_NUM_EDP];
 
+	/**
+	 * @restore_backlight:
+	 *
+	 * Flag to indicate whether to restore backlight after modeset.
+	 */
+	bool restore_backlight;
+
 	/**
 	 * @aux_hpd_discon_quirk:
 	 *
-- 
2.51.0