linux-kernel - [PATCH v4 09/13] phy: qcom: qmp-usbc: Add TCSR parsing and PHY mode setting

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250911-add-displayport-support-for-qcs615-platform-v4-9-2702bdda14ed@oss.qualcomm.com>
Date: Thu, 11 Sep 2025 22:55:06 +0800
From: Xiangxu Yin <xiangxu.yin@....qualcomm.com>
To: Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Rob Clark <robin.clark@....qualcomm.com>,
        Dmitry Baryshkov <lumag@...nel.org>,
        Abhinav Kumar <abhinav.kumar@...ux.dev>,
        Jessica Zhang <jessica.zhang@....qualcomm.com>,
        Sean Paul <sean@...rly.run>,
        Marijn Suijten <marijn.suijten@...ainline.org>,
        David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>
Cc: linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
        fange.zhang@....qualcomm.com, yongxing.mou@....qualcomm.com,
        li.liu@....qualcomm.com, tingwei.zhang@....qualcomm.com,
        Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>,
        Xiangxu Yin <xiangxu.yin@....qualcomm.com>
Subject: [PATCH v4 09/13] phy: qcom: qmp-usbc: Add TCSR parsing and PHY
 mode setting

Parse TCSR registers to support DP mode signaling via dp_phy_mode_reg.
Move USB PHY-only register configuration from com_init to
qmp_usbc_usb_power_on.

Signed-off-by: Xiangxu Yin <xiangxu.yin@....qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 47 ++++++++++++++++++++------------
 1 file changed, 29 insertions(+), 18 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
index 95a099de908e7f3478eb1e18326b21d4014d8da6..c57596fe0d5cd5c15105ad8183ccdc047953e4d5 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
@@ -33,6 +33,8 @@
 #include "phy-qcom-qmp-dp-phy-v2.h"
 
 #define PHY_INIT_COMPLETE_TIMEOUT		10000
+#define SW_PORTSELECT_VAL			BIT(0)
+#define SW_PORTSELECT_MUX			BIT(1)
 
 /* set of registers with offsets different per-PHY */
 enum qphy_reg_layout {
@@ -686,12 +688,16 @@ static const struct qmp_phy_cfg qcs615_usb3dp_phy_cfg = {
 	.num_vregs		= ARRAY_SIZE(qmp_phy_qcs615_vreg_l),
 };
 
+static void qmp_usbc_set_phy_mode(struct qmp_usbc *qmp, bool is_dp)
+{
+	if (qmp->tcsr_map && qmp->dp_phy_mode_reg)
+		regmap_write(qmp->tcsr_map, qmp->dp_phy_mode_reg, is_dp);
+}
+
 static int qmp_usbc_com_init(struct phy *phy)
 {
 	struct qmp_usbc *qmp = phy_get_drvdata(phy);
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
-	void __iomem *pcs = qmp->pcs;
-	u32 val = 0;
 	int ret;
 
 	ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
@@ -716,16 +722,6 @@ static int qmp_usbc_com_init(struct phy *phy)
 	if (ret)
 		goto err_assert_reset;
 
-	qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);
-
-#define SW_PORTSELECT_VAL			BIT(0)
-#define SW_PORTSELECT_MUX			BIT(1)
-	/* Use software based port select and switch on typec orientation */
-	val = SW_PORTSELECT_MUX;
-	if (qmp->orientation == TYPEC_ORIENTATION_REVERSE)
-		val |= SW_PORTSELECT_VAL;
-	writel(val, qmp->pcs_misc);
-
 	return 0;
 
 err_assert_reset:
@@ -996,6 +992,14 @@ static int qmp_usbc_usb_power_on(struct phy *phy)
 	unsigned int val;
 	int ret;
 
+	qphy_setbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);
+
+	/* Use software based port select and switch on typec orientation */
+	val = SW_PORTSELECT_MUX;
+	if (qmp->orientation == TYPEC_ORIENTATION_REVERSE)
+		val |= SW_PORTSELECT_VAL;
+	writel(val, qmp->pcs_misc);
+
 	qmp_configure(qmp->dev, qmp->serdes, cfg->serdes_tbl,
 		      cfg->serdes_tbl_num);
 
@@ -1068,6 +1072,8 @@ static int qmp_usbc_usb_enable(struct phy *phy)
 	if (ret)
 		goto out_unlock;
 
+	qmp_usbc_set_phy_mode(qmp, false);
+
 	ret = qmp_usbc_usb_power_on(phy);
 	if (ret) {
 		qmp_usbc_com_exit(phy);
@@ -1493,6 +1499,7 @@ static int qmp_usbc_typec_switch_set(struct typec_switch_dev *sw,
 		qmp_usbc_com_exit(qmp->usb_phy);
 
 		qmp_usbc_com_init(qmp->usb_phy);
+		qmp_usbc_set_phy_mode(qmp, false);
 		qmp_usbc_usb_power_on(qmp->usb_phy);
 	}
 
@@ -1634,15 +1641,16 @@ static int qmp_usbc_parse_dt(struct qmp_usbc *qmp)
 	return 0;
 }
 
-static int qmp_usbc_parse_vls_clamp(struct qmp_usbc *qmp)
+static int qmp_usbc_parse_tcsr(struct qmp_usbc *qmp)
 {
 	struct of_phandle_args tcsr_args;
 	struct device *dev = qmp->dev;
-	int ret;
+	int ret, args_count;
 
-	/*  for backwards compatibility ignore if there is no property */
-	ret = of_parse_phandle_with_fixed_args(dev->of_node, "qcom,tcsr-reg", 1, 0,
-					       &tcsr_args);
+	args_count = of_property_count_u32_elems(dev->of_node, "qcom,tcsr-reg");
+	args_count = args_count - 1;
+	ret = of_parse_phandle_with_fixed_args(dev->of_node, "qcom,tcsr-reg",
+					       args_count, 0, &tcsr_args);
 	if (ret == -ENOENT)
 		return 0;
 	else if (ret < 0)
@@ -1655,6 +1663,9 @@ static int qmp_usbc_parse_vls_clamp(struct qmp_usbc *qmp)
 
 	qmp->vls_clamp_reg = tcsr_args.args[0];
 
+	if (args_count > 1)
+		qmp->dp_phy_mode_reg = tcsr_args.args[1];
+
 	return 0;
 }
 
@@ -1694,7 +1705,7 @@ static int qmp_usbc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = qmp_usbc_parse_vls_clamp(qmp);
+	ret = qmp_usbc_parse_tcsr(qmp);
 	if (ret)
 		return ret;
 

-- 
2.34.1