[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ex5oojf6lqti45joyjxpyi2ev4mjcitw4lz6cszu6lustrby4j@zzigwnu4pbxo>
Date: Thu, 11 Sep 2025 15:15:11 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Wenmeng Liu <quic_wenmliu@...lcomm.com>
Cc: Loic Poulain <loic.poulain@....qualcomm.com>,
Robert Foss <rfoss@...nel.org>, Andi Shyti <andi.shyti@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, vladimir.zapolskiy@...aro.org,
todor.too@...il.com, bryan.odonoghue@...aro.org,
linux-i2c@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Subject: Re: [PATCH v5 3/3] arm64: dts: qcom: lemans-evk-camera: Add DT
overlay
On Thu, Sep 11, 2025 at 07:55:16PM +0800, Wenmeng Liu wrote:
> Enable IMX577 via CCI1 on LeMans EVK Core Kit.
>
> The LeMans EVK board does not include a camera sensor
> by default, this overlay reflects the possibility of
> attaching an optional camera sensor.
> For this reason, the camera sensor configuration is
> placed in lemans-evk-camera.dtso, rather than
> modifying the base lemans-evk.dts.
So, is it the only camera configuration that we are going to support?
If not, what happens when we get the second sensor or second set of
sensors to support?
>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@...aro.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
> Signed-off-by: Wenmeng Liu <quic_wenmliu@...lcomm.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 4 +
> arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso | 97 +++++++++++++++++++++++++
At least the filename should mention that this is imx577.
> 2 files changed, 101 insertions(+)
--
With best wishes
Dmitry
Powered by blists - more mailing lists