| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <aMRRECxBqzRqGYwf@lizhi-Precision-Tower-5810>
Date: Fri, 12 Sep 2025 12:57:52 -0400
From: Frank Li <Frank.li@....com>
To: Marco Felsch <m.felsch@...gutronix.de>
Cc: Vinod Koul <vkoul@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Jiada Wang <jiada_wang@...tor.com>, dmaengine@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 02/10] dmaengine: imx-sdma: fix spba-bus handling for
i.MX8M
On Fri, Sep 12, 2025 at 05:27:48PM +0200, Marco Felsch wrote:
> On 25-09-12, Frank Li wrote:
> > On Thu, Sep 11, 2025 at 11:56:43PM +0200, Marco Felsch wrote:
> > > Starting with i.MX8M* devices there are multiple spba-busses so we can't
> > > just search the whole DT for the first spba-bus match and take it.
> > > Instead we need to check for each device to which bus it belongs and
> > > setup the spba_{start,end}_addr accordingly per sdma_channel.
> > >
> > > While on it, don't ignore errors from of_address_to_resource() if they
> > > are valid.
> > >
> > > Signed-off-by: Marco Felsch <m.felsch@...gutronix.de>
> >
> > I think the below method should be better.
> >
> > of_translate_address(per_address) == OF_BAD_ADDR to check if belong spba-bus
>
> The SDMA engine doesn't have to be part of the SPBA bus, please see the
> i.MX8MM for example.
which one, can you point me?
spba_bus = of_get_parent(chan->slave->of_node);
Actaully you get dma consumers' spba-bus, not dmaengine one.
And I also confused
+ if (sdmac->per_address2 >= sdmac->spba_start_addr &&
+ sdmac->per_address2 <= sdmac->spba_end_addr)
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SP;
- if (sdmac->per_address >= sdma->spba_start_addr &&
- sdmac->per_address <= sdma->spba_end_addr)
+ if (sdmac->per_address >= sdmac->spba_start_addr &&
+ sdmac->per_address <= sdmac->spba_end_addr)
sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_DP;
what's purpsoe of this code, check if dma target address in spba_bus ?
And only here use spba_start_addr!
Frank
>
> Regards,
> Marco
>
> > aips3: bus@...00000 {
> > ...
> > ranges = <0x30800000 0x30800000 0x400000>,
> > <0x8000000 0x8000000 0x10000000>;
> >
> > spba1: spba-bus@...00000 {
> > compatible = "fsl,spba-bus", "simple-bus";
> > #address-cells = <1>;
> > #size-cells = <1>;
> > reg = <0x30800000 0x100000>;
> > ranges;
> >
> > ...
> > sdma1:
> >
> > };
> >
> > of_translate_address() will 1:1 map at spba-bus@...00000 spba1.
> > then
> > reach ranges = <0x30800000 0x30800000 0x400000> of aips3
> >
> > if per_address is not in this range, it should return OF_BAD_ADDR. So
> > needn't parse reg of bus@...00000 at all.
> >
> > Frank
> >
> > > ---
> > > drivers/dma/imx-sdma.c | 58 ++++++++++++++++++++++++++++++++++----------------
> > > 1 file changed, 40 insertions(+), 18 deletions(-)
> > >
> > > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
> > > index 3ecb917214b1268b148a29df697b780bc462afa4..56daaeb7df03986850c9c74273d0816700581dc0 100644
> > > --- a/drivers/dma/imx-sdma.c
> > > +++ b/drivers/dma/imx-sdma.c
> > > @@ -429,6 +429,8 @@ struct sdma_desc {
> > > * @event_mask: event mask used in p_2_p script
> > > * @watermark_level: value for gReg[7], some script will extend it from
> > > * basic watermark such as p_2_p
> > > + * @spba_start_addr: SDMA controller SPBA bus start address
> > > + * @spba_end_addr: SDMA controller SPBA bus end address
> > > * @shp_addr: value for gReg[6]
> > > * @per_addr: value for gReg[2]
> > > * @status: status of dma channel
> > > @@ -461,6 +463,8 @@ struct sdma_channel {
> > > dma_addr_t per_address, per_address2;
> > > unsigned long event_mask[2];
> > > unsigned long watermark_level;
> > > + u32 spba_start_addr;
> > > + u32 spba_end_addr;
> > > u32 shp_addr, per_addr;
> > > enum dma_status status;
> > > struct imx_dma_data data;
> > > @@ -534,8 +538,6 @@ struct sdma_engine {
> > > u32 script_number;
> > > struct sdma_script_start_addrs *script_addrs;
> > > const struct sdma_driver_data *drvdata;
> > > - u32 spba_start_addr;
> > > - u32 spba_end_addr;
> > > unsigned int irq;
> > > dma_addr_t bd0_phys;
> > > struct sdma_buffer_descriptor *bd0;
> > > @@ -1236,8 +1238,6 @@ static void sdma_channel_synchronize(struct dma_chan *chan)
> > >
> > > static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
> > > {
> > > - struct sdma_engine *sdma = sdmac->sdma;
> > > -
> > > int lwml = sdmac->watermark_level & SDMA_WATERMARK_LEVEL_LWML;
> > > int hwml = (sdmac->watermark_level & SDMA_WATERMARK_LEVEL_HWML) >> 16;
> > >
> > > @@ -1263,12 +1263,12 @@ static void sdma_set_watermarklevel_for_p2p(struct sdma_channel *sdmac)
> > > swap(sdmac->event_mask[0], sdmac->event_mask[1]);
> > > }
> > >
> > > - if (sdmac->per_address2 >= sdma->spba_start_addr &&
> > > - sdmac->per_address2 <= sdma->spba_end_addr)
> > > + if (sdmac->per_address2 >= sdmac->spba_start_addr &&
> > > + sdmac->per_address2 <= sdmac->spba_end_addr)
> > > sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_SP;
> > >
> > > - if (sdmac->per_address >= sdma->spba_start_addr &&
> > > - sdmac->per_address <= sdma->spba_end_addr)
> > > + if (sdmac->per_address >= sdmac->spba_start_addr &&
> > > + sdmac->per_address <= sdmac->spba_end_addr)
> > > sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_DP;
> > >
> > > sdmac->watermark_level |= SDMA_WATERMARK_LEVEL_CONT;
> > > @@ -1447,6 +1447,31 @@ static void sdma_desc_free(struct virt_dma_desc *vd)
> > > kfree(desc);
> > > }
> > >
> > > +static int sdma_config_spba_slave(struct dma_chan *chan)
> > > +{
> > > + struct sdma_channel *sdmac = to_sdma_chan(chan);
> > > + struct device_node *spba_bus;
> > > + struct resource spba_res;
> > > + int ret;
> > > +
> > > + spba_bus = of_get_parent(chan->slave->of_node);
> > > + /* Device doesn't belong to the spba-bus */
> > > + if (!of_device_is_compatible(spba_bus, "fsl,spba-bus"))
> > > + return 0;
> > > +
> > > + ret = of_address_to_resource(spba_bus, 0, &spba_res);
> > > + of_node_put(spba_bus);
> > > + if (ret) {
> > > + dev_err(sdmac->sdma->dev, "Failed to get spba-bus resources\n");
> > > + return -EINVAL;
> > > + }
> > > +
> > > + sdmac->spba_start_addr = spba_res.start;
> > > + sdmac->spba_end_addr = spba_res.end;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > static int sdma_alloc_chan_resources(struct dma_chan *chan)
> > > {
> > > struct sdma_channel *sdmac = to_sdma_chan(chan);
> > > @@ -1527,6 +1552,8 @@ static void sdma_free_chan_resources(struct dma_chan *chan)
> > >
> > > sdmac->event_id0 = 0;
> > > sdmac->event_id1 = 0;
> > > + sdmac->spba_start_addr = 0;
> > > + sdmac->spba_end_addr = 0;
> > >
> > > sdma_set_channel_priority(sdmac, 0);
> > >
> > > @@ -1837,6 +1864,7 @@ static int sdma_config(struct dma_chan *chan,
> > > {
> > > struct sdma_channel *sdmac = to_sdma_chan(chan);
> > > struct sdma_engine *sdma = sdmac->sdma;
> > > + int ret;
> > >
> > > memcpy(&sdmac->slave_config, dmaengine_cfg, sizeof(*dmaengine_cfg));
> > >
> > > @@ -1867,6 +1895,10 @@ static int sdma_config(struct dma_chan *chan,
> > > sdma_event_enable(sdmac, sdmac->event_id1);
> > > }
> > >
> > > + ret = sdma_config_spba_slave(chan);
> > > + if (ret)
> > > + return ret;
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -2235,11 +2267,9 @@ static struct dma_chan *sdma_xlate(struct of_phandle_args *dma_spec,
> > > static int sdma_probe(struct platform_device *pdev)
> > > {
> > > struct device_node *np = pdev->dev.of_node;
> > > - struct device_node *spba_bus;
> > > const char *fw_name;
> > > int ret;
> > > int irq;
> > > - struct resource spba_res;
> > > int i;
> > > struct sdma_engine *sdma;
> > > s32 *saddr_arr;
> > > @@ -2375,14 +2405,6 @@ static int sdma_probe(struct platform_device *pdev)
> > > dev_err(&pdev->dev, "failed to register controller\n");
> > > goto err_register;
> > > }
> > > -
> > > - spba_bus = of_find_compatible_node(NULL, NULL, "fsl,spba-bus");
> > > - ret = of_address_to_resource(spba_bus, 0, &spba_res);
> > > - if (!ret) {
> > > - sdma->spba_start_addr = spba_res.start;
> > > - sdma->spba_end_addr = spba_res.end;
> > > - }
> > > - of_node_put(spba_bus);
> > > }
> > >
> > > /*
> > >
> > > --
> > > 2.47.3
> > >
> >
Powered by blists - more mailing lists