[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3960b845-3838-4690-b01d-21e61ccfa8fd@gocontroll.com>
Date: Fri, 12 Sep 2025 08:17:09 +0200
From: Maud Spierings <maudspierings@...ontroll.com>
To: Frank Li <Frank.li@....com>
Cc: Lee Jones <lee@...nel.org>, Daniel Thompson <danielt@...nel.org>,
Jingoo Han <jingoohan1@...il.com>, Pavel Machek <pavel@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Helge Deller <deller@....de>,
Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, dri-devel@...ts.freedesktop.org,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-fbdev@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3 1/4] dt-bindings: backlight: Add max25014 bindingsy
Hi Frank,
Thanks for the review.
On 9/11/25 17:33, Frank Li wrote:
> On Thu, Sep 11, 2025 at 09:53:18AM +0200, Maud Spierings via B4 Relay wrote:
>> From: Maud Spierings <maudspierings@...ontroll.com>
>>
>> The Maxim MAX25014 is a 4-channel automotive grade backlight driver IC
>> with integrated boost controller.
>>
>> Signed-off-by: Maud Spierings <maudspierings@...ontroll.com>
>> ---
>> .../bindings/leds/backlight/maxim,max25014.yaml | 81 ++++++++++++++++++++++
>> MAINTAINERS | 5 ++
>> 2 files changed, 86 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/leds/backlight/maxim,max25014.yaml b/Documentation/devicetree/bindings/leds/backlight/maxim,max25014.yaml
>> new file mode 100644
>> index 0000000000000000000000000000000000000000..e113a2ad16aa74f982b9c2ea80578aed2d9424fe
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/leds/backlight/maxim,max25014.yaml
>> @@ -0,0 +1,81 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/leds/backlight/maxim,max25014.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Maxim max25014 backlight controller
>> +
>> +maintainers:
>> + - Maud Spierings <maudspierings@...ontroll.com>
>> +
>> +allOf:
>> + - $ref: common.yaml#
>> +
>> +properties:
>> + compatible:
>> + enum:
>> + - maxim,max25014
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + enable-gpios:
>> + maxItems: 1
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + power-supply:
>> + description: Regulator which controls the boost converter input rail.
>> +
>> + pwms:
>> + maxItems: 1
>> +
>> + maxim,iset:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + maximum: 15
>> + default: 11
>> + description:
>> + Value of the ISET register field. This controls the current scale of the
>> + outputs, a higher number means more current.
>
> Use standard unit. Do not use register value directly.
It is unfortunately not just a value in Amps, it depends on the hardware
design. There is a kind of "default" table with a 49.9K resistor, but
depending on that resistor the current is different.
>> +
>> + maxim,strings:
>> + $ref: /schemas/types.yaml#/definitions/uint32-array
>> + description:
>> + A 4-bit bitfield that describes which led strings to turn on.
>> + minItems: 4
>> + maxItems: 4
>> + items:
>> + maximum: 1
>
> led should have standard interface.
>
> check Documentation/devicetree/bindings/leds/common.yaml
Thanks I will investigate, that may indeed be a better abstraction.
Kind regards,
Maud
Powered by blists - more mailing lists