| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250913-judyln-dts-v1-11-23b4b7790dce@postmarketos.org>
Date: Sat, 13 Sep 2025 16:56:44 -0700
From: Paul Sajna <sajattack@...tmarketos.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, David Heidelberg <david@...t.cz>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Amir Dahan <system64fumo@...tonmail.com>,
Christopher Brown <crispybrown@...il.com>,
Paul Sajna <sajattack@...tmarketos.org>
Subject: [PATCH 11/11] arm64: dts: qcom: sdm845-lg-common: Sort and cleanup
nodes
Fix style issues and sort alphabetically
Signed-off-by: Paul Sajna <sajattack@...tmarketos.org>
---
arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 226 ++++++++++++-------------
1 file changed, 113 insertions(+), 113 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 1f4427194fddea238c1b97afd8494d08b006a40a..cbdd0c537a591a4c5365b0cb3a85d85e5c1269fa 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -45,8 +45,8 @@ reserved-memory {
#size-cells = <2>;
ranges;
- qseecom_mem: memory@...00000 {
- reg = <0 0xb2000000 0 0x1800000>;
+ ipa_fw_mem: memory@...00000 {
+ reg = <0 0x8c400000 0 0x10000>;
no-map;
};
@@ -55,11 +55,6 @@ gpu_mem: memory@...15000 {
no-map;
};
- ipa_fw_mem: memory@...00000 {
- reg = <0 0x8c400000 0 0x10000>;
- no-map;
- };
-
adsp_mem: memory@...00000 {
reg = <0 0x8c500000 0 0x1e00000>;
no-map;
@@ -100,9 +95,8 @@ spss_mem: memory@...00000 {
no-map;
};
- /* Framebuffer region */
- memory@...00000 {
- reg = <0x0 0x9d400000 0x0 0x2400000>;
+ qseecom_mem: memory@...00000 {
+ reg = <0 0xb2000000 0 0x1800000>;
no-map;
};
@@ -465,11 +459,11 @@ vreg_s3c_0p6: smps3 {
};
};
-&cdsp_pas {
+&adsp_pas {
status = "okay";
};
-&gmu {
+&cdsp_pas {
status = "okay";
};
@@ -481,6 +475,10 @@ &gcc {
<GCC_LPASS_SWAY_CLK>;
};
+&gmu {
+ status = "okay";
+};
+
&gpu {
status = "okay";
@@ -500,74 +498,88 @@ &mss_pil {
status = "okay";
};
+&pm8998_gpios {
+ vol_up_pin_a: vol-up-active-state {
+ pins = "gpio6";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ };
+};
+
&pm8998_resin {
linux,code = <KEY_VOLUMEDOWN>;
- status = "okay";
-};
-&sdhc_2 {
status = "okay";
+};
- cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
+&pmi8998_flash {
+ status = "okay";
- vmmc-supply = <&vreg_l21a_2p95>;
- vqmmc-supply = <&vddpx_2>;
+ led-0 {
+ label = "flash";
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <1>;
+ led-max-microamp = <850000>;
+ flash-max-microamp = <850000>;
+ flash-max-timeout-us = <500000>;
+ };
};
-/*
- * UFS works partially and only with clk_ignore_unused.
- * Sometimes it crashes with I/O errors.
- */
-&ufs_mem_hc {
+&pmi8998_wled {
status = "okay";
-
- reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
-
- vcc-supply = <&vreg_l20a_2p95>;
- vcc-max-microamp = <600000>;
};
-&ufs_mem_phy {
+&pmi8998_lpg {
status = "okay";
- vdda-phy-supply = <&vdda_ufs1_core>;
- vdda-pll-supply = <&vdda_ufs1_1p2>;
+ led@0 {
+ label = "blue";
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "green";
+ reg = <4>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "red";
+ reg = <5>;
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ };
};
-&usb_1 {
- status = "okay";
+&qup_uart9_rx {
+ drive-strength = <2>;
+ bias-pull-up;
};
-&usb_1_dwc3 {
- /* TODO: these devices have usb id pin */
- dr_mode = "peripheral";
+&qup_uart9_tx {
+ drive-strength = <2>;
+ bias-disable;
};
-&usb_1_hsphy {
- status = "okay";
+&sdhc_2 {
+ cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
- vdd-supply = <&vdda_usb1_ss_core>;
- vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
- vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
- qcom,imp-res-offset-value = <8>;
- qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
- qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
- qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-};
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vddpx_2>;
-&usb_1_qmpphy {
status = "okay";
-
- vdda-phy-supply = <&vdda_usb1_ss_1p2>;
- vdda-pll-supply = <&vdda_usb1_ss_core>;
};
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-
&tlmm {
gpio-reserved-ranges = <28 4>, <81 4>;
@@ -604,91 +616,79 @@ sd_card_det_n: sd-card-det-n-state {
};
};
-&pm8998_gpios {
- vol_up_pin_a: vol-up-active-state {
- pins = "gpio6";
- function = "normal";
- input-enable;
- bias-pull-up;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- };
+&qupv3_id_0 {
+ status = "okay";
};
-&pmi8998_flash {
+&qupv3_id_1 {
status = "okay";
-
- led-0 {
- label = "flash";
- function = LED_FUNCTION_FLASH;
- color = <LED_COLOR_ID_WHITE>;
- led-sources = <1>;
- led-max-microamp = <850000>;
- flash-max-microamp = <850000>;
- flash-max-timeout-us = <500000>;
- };
};
-&pmi8998_lpg {
+&uart6 {
+ pinctrl-0 = <&qup_uart6_4pin>;
+
status = "okay";
- led@0 {
- label = "blue";
- reg = <3>;
- color = <LED_COLOR_ID_BLUE>;
- default-state = "off";
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
};
+};
- led@1 {
- label = "green";
- reg = <4>;
- color = <LED_COLOR_ID_GREEN>;
- default-state = "off";
- };
+&uart9 {
+ label = "LS-UART1";
- led@2 {
- label = "red";
- reg = <5>;
- color = <LED_COLOR_ID_RED>;
- default-state = "off";
- };
+ status = "okay";
};
-&qupv3_id_0 {
+/*
+ * UFS works partially and only with clk_ignore_unused.
+ * Sometimes it crashes with I/O errors.
+ */
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l20a_2p95>;
+ vcc-max-microamp = <600000>;
+
status = "okay";
};
-&qupv3_id_1 {
+&ufs_mem_phy {
+ vdda-phy-supply = <&vdda_ufs1_core>;
+ vdda-pll-supply = <&vdda_ufs1_1p2>;
+
status = "okay";
};
-&qup_uart9_rx {
- drive-strength = <2>;
- bias-pull-up;
+&usb_1 {
+ status = "okay";
};
-&qup_uart9_tx {
- drive-strength = <2>;
- bias-disable;
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
};
-&uart6 {
- pinctrl-0 = <&qup_uart6_4pin>;
-
- status = "okay";
+&usb_1_hsphy {
+ vdd-supply = <&vdda_usb1_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
- bluetooth {
- compatible = "qcom,wcn3990-bt";
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
- vddio-supply = <&vreg_s4a_1p8>;
- vddxo-supply = <&vreg_l7a_1p8>;
- vddrf-supply = <&vreg_l17a_1p3>;
- vddch0-supply = <&vreg_l25a_3p3>;
- max-speed = <3200000>;
- };
+ status = "okay";
};
-&uart9 {
- label = "LS-UART1";
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb1_ss_core>;
status = "okay";
};
--
2.51.0
Powered by blists - more mailing lists