linux-kernel - [PATCH 2/3] clk: keystone: don't cache clock rate

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250915143440.2362812-3-mwalle@kernel.org>
Date: Mon, 15 Sep 2025 16:34:39 +0200
From: Michael Walle <mwalle@...nel.org>
To: Frank Binns <frank.binns@...tec.com>,
	Matt Coster <matt.coster@...tec.com>,
	Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
	Maxime Ripard <mripard@...nel.org>,
	Thomas Zimmermann <tzimmermann@...e.de>,
	David Airlie <airlied@...il.com>,
	Simona Vetter <simona@...ll.ch>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Nishanth Menon <nm@...com>,
	Vignesh Raghavendra <vigneshr@...com>,
	Tero Kristo <kristo@...nel.org>,
	Santosh Shilimkar <ssantosh@...nel.org>,
	Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...nel.org>
Cc: Andrew Davis <afd@...com>,
	dri-devel@...ts.freedesktop.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-clk@...r.kernel.org,
	Michael Walle <mwalle@...nel.org>
Subject: [PATCH 2/3] clk: keystone: don't cache clock rate

The TISCI firmware will return 0 if the clock or consumer is not
enabled although there is a stored value in the firmware. IOW a call to
set rate will work but at get rate will always return 0 if the clock is
disabled.
The clk framework will try to cache the clock rate when it's requested
by a consumer. If the clock or consumer is not enabled at that point,
the cached value is 0, which is wrong. Thus, disable the cache
altogether.

Signed-off-by: Michael Walle <mwalle@...nel.org>
---
I guess to make it work correctly with the caching of the linux
subsystem a new flag to query the real clock rate is needed. That
way, one could also query the default value without having to turn
the clock and consumer on first. That can be retrofitted later and
the driver could query the firmware capabilities.

Regarding a Fixes: tag. I didn't include one because it might have a
slight performance impact because the firmware has to be queried
every time now and it doesn't have been a problem for now. OTOH I've
enabled tracing during boot and there were just a handful
clock_{get/set}_rate() calls.
---
 drivers/clk/keystone/sci-clk.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/clk/keystone/sci-clk.c b/drivers/clk/keystone/sci-clk.c
index c5894fc9395e..d73858b5ca7a 100644
--- a/drivers/clk/keystone/sci-clk.c
+++ b/drivers/clk/keystone/sci-clk.c
@@ -333,6 +333,14 @@ static int _sci_clk_build(struct sci_clk_provider *provider,
 
 	init.ops = &sci_clk_ops;
 	init.num_parents = sci_clk->num_parents;
+
+	/*
+	 * A clock rate query to the SCI firmware will return 0 if either the
+	 * clock itself is disabled or the attached device/consumer is disabled.
+	 * This makes it inherently unsuitable for the caching of the clk
+	 * framework.
+	 */
+	init.flags = CLK_GET_RATE_NOCACHE;
 	sci_clk->hw.init = &init;
 
 	ret = devm_clk_hw_register(provider->dev, &sci_clk->hw);
-- 
2.39.5