[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250915060141.12540-2-clamor95@gmail.com>
Date: Mon, 15 Sep 2025 09:01:37 +0300
From: Svyatoslav Ryhel <clamor95@...il.com>
To: Andi Shyti <andi.shyti@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Peter Rosin <peda@...ntia.se>,
Michał Mirosław <mirq-linux@...e.qmqm.pl>,
Svyatoslav Ryhel <clamor95@...il.com>,
Jonas Schwöbel <jonasschwoebel@...oo.de>
Cc: linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v1 1/2] dt-bindings: i2c: Document GPIO detected hot-plugged I2C bus
Schema describes hardware configuration that uses a GPIO signal to
determine the bus's presence and state, allowing the system to dynamically
configure I2C devices as they are plugged in or removed.
Signed-off-by: Svyatoslav Ryhel <clamor95@...il.com>
---
.../bindings/i2c/i2c-hotplug-gpio.yaml | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml
diff --git a/Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml
new file mode 100644
index 000000000000..d1d5d830c91b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-hotplug-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO detected hot-plugged I2C bus
+
+maintainers:
+ - Michał Mirosław <mirq-linux@...e.qmqm.pl>
+ - Svyatoslav Ryhel <clamor95@...il.com>
+
+description: An I2C bus, where some devices on the bus are hot-pluggable
+ and their presence is indicated by GPIO line.
+
+properties:
+ compatible:
+ const: i2c-hotplug-gpio
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ interrupts:
+ maxItems: 1
+
+ detect-gpios:
+ description: usually the same GPIO used as an interrupt. In the active
+ state should indicate that detachable devices are plugged in.
+ maxItems: 1
+
+ i2c-parent:
+ maxItems: 1
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#size-cells'
+ - interrupts
+ - detect-gpios
+ - i2c-parent
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c-dock {
+ compatible = "i2c-hotplug-gpio";
+
+ interrupt-parent = <&gpio>;
+ interrupts = <164 IRQ_TYPE_EDGE_BOTH>;
+
+ detect-gpios = <&gpio 164 GPIO_ACTIVE_LOW>;
+
+ i2c-parent = <&gen2_i2c>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+...
--
2.48.1
Powered by blists - more mailing lists