[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <d07be614-6186-42a2-a0cf-2a73b7ab186b@linux.intel.com>
Date: Mon, 15 Sep 2025 14:32:44 +0800
From: Baolu Lu <baolu.lu@...ux.intel.com>
To: Joel Granados <joel.granados@...nel.org>,
David Woodhouse <dwmw2@...radead.org>, Joerg Roedel <joro@...tes.org>,
Will Deacon <will@...nel.org>, Robin Murphy <robin.murphy@....com>
Cc: iommu@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] intel/vt-d: Send Page Request Drain only if supported
On 9/12/25 10:35, Baolu Lu wrote:
> On 9/9/25 16:58, Joel Granados wrote:
>> The intel_iommu_drain_pasid_prq function sends QI_OPT_WAIT_DRAIN to
>> hardware without verifying Page Request Drain Support (PDS). According
>> to VT-d specification section 6.5.2.8, PRQ drain functionality should
>> only be used when PDS (bit 42) is set in the extended capability
>> register. Add ecap_pds() check to conditionally use QI_OPT_WAIT_DRAIN
>> based on hardware capability.
>>
>> Signed-off-by: Joel Granados<joel.granados@...nel.org>
>> ---
>> drivers/iommu/intel/prq.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/iommu/intel/prq.c b/drivers/iommu/intel/prq.c
>> index
>> 52570e42a14c05b7492957909568805dc9c7b6ef..f89916de31a3439866f059f5400e45fb362a6a7d 100644
>> --- a/drivers/iommu/intel/prq.c
>> +++ b/drivers/iommu/intel/prq.c
>> @@ -119,7 +119,7 @@ void intel_iommu_drain_pasid_prq(struct device
>> *dev, u32 pasid)
>> }
>> qi_retry:
>> reinit_completion(&iommu->prq_complete);
>> - qi_submit_sync(iommu, desc, 3, QI_OPT_WAIT_DRAIN);
>> + qi_submit_sync(iommu, desc, 3, ecap_pds(iommu->ecap) ?
>> QI_OPT_WAIT_DRAIN : 0);
>
> I'm afraid that draining page requests and responses won't work as
> expected without the PDS capability. We should perhaps fail to enable
> IOPF if the PDS capability isn't supported.
>
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index 9c3ab9d9f69a..ca6a6eaea62c 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -3983,6 +3983,10 @@ int intel_iommu_enable_iopf(struct device *dev)
> if (!info->pri_enabled)
> return -ENODEV;
>
> + /* PDS is required to drain page requests and responses. */
> + if (!ecap_pds(iommu->ecap))
> + return -ENODEV;
> +
> /* pri_enabled is protected by the group mutex. */
> iommu_group_mutex_assert(dev);
> if (info->iopf_refcount) {
>
> At the same time, qi_submit_sync() should not set PD bit in the wait
> descriptor as the spec Section 6.5.2.9 "Invalidation Wait Descriptor"
> states:
>
> Page-request Drain (PD): Remapping hardware implementations reporting
> Page-request draining as not supported (PDS = 0 in ECAP_REG) treats
> this field as reserved.
>
> therefore,
>
> diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
> index ec975c73cfe6..e38af2274032 100644
> --- a/drivers/iommu/intel/dmar.c
> +++ b/drivers/iommu/intel/dmar.c
> @@ -1427,7 +1427,7 @@ int qi_submit_sync(struct intel_iommu *iommu,
> struct qi_desc *desc,
>
> wait_desc.qw0 = QI_IWD_STATUS_DATA(QI_DONE) |
> QI_IWD_STATUS_WRITE | QI_IWD_TYPE;
> - if (options & QI_OPT_WAIT_DRAIN)
> + if ((options & QI_OPT_WAIT_DRAIN) && !WARN_ON_ONCE(!
> ecap_pds(iommu->ecap)))
> wait_desc.qw0 |= QI_IWD_PRQ_DRAIN;
> wait_desc.qw1 = virt_to_phys(&qi->desc_status[wait_index]);
> wait_desc.qw2 = 0;
>
> ?
I submitted a fix patch for this. Feel free to comment on it there.
https://lore.kernel.org/linux-iommu/20250915062946.120196-1-baolu.lu@linux.intel.com/
Thanks,
baolu
Powered by blists - more mailing lists