| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ed424c58891fc3e95d3e6c78ff2640bc1f54855e.camel@mediatek.com>
Date: Mon, 15 Sep 2025 09:15:03 +0000
From: Friday Yang (杨阳) <Friday.Yang@...iatek.com>
To: "robh@...nel.org" <robh@...nel.org>, "matthias.bgg@...il.com"
<matthias.bgg@...il.com>, Yong Wu (吴勇)
<Yong.Wu@...iatek.com>, "p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
"conor+dt@...nel.org" <conor+dt@...nel.org>, "krzk@...nel.org"
<krzk@...nel.org>, AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>, "devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>, Project_Global_Chrome_Upstream_Group
<Project_Global_Chrome_Upstream_Group@...iatek.com>
Subject: Re: [PATCH v10 2/2] memory: mtk-smi: mt8188: Add SMI reset and clamp
for MT8188
On Tue, 2025-08-12 at 11:43 +0000, Yong Wu (吴勇) wrote:
> On Wed, 2025-08-06 at 16:59 +0800, Friday Yang wrote:
> > To prevent handling glitch signals during MTCMOS on/off
> > transitions,
> > SMI requires clamp and reset operations. Parse the reset settings
> > for
> > SMI LARBs and the clamp settings for the SMI Sub-Common. Register
> > genpd callback for the SMI LARBs located in image, camera and IPE
> > subsystems, and apply reset and clamp operations within the
> > callback.
> >
> > Signed-off-by: Friday Yang <friday.yang@...iatek.com>
> > ---
> > drivers/memory/mtk-smi.c | 129
> > +++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 129 insertions(+)
> >
> > diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> > index 733e22f695ab..acc8904dd117 100644
> > --- a/drivers/memory/mtk-smi.c
> > +++ b/drivers/memory/mtk-smi.c
> > @@ -10,11 +10,15 @@
> > #include <linux/err.h>
> > #include <linux/io.h>
> > #include <linux/iopoll.h>
> > +#include <linux/mfd/syscon.h>
> > #include <linux/module.h>
> > #include <linux/of.h>
> > #include <linux/of_platform.h>
> > #include <linux/platform_device.h>
> > +#include <linux/pm_domain.h>
> > #include <linux/pm_runtime.h>
> > +#include <linux/regmap.h>
> > +#include <linux/reset.h>
> > #include <linux/soc/mediatek/mtk_sip_svc.h>
> > #include <soc/mediatek/smi.h>
> > #include <dt-bindings/memory/mt2701-larb-port.h>
> > @@ -34,6 +38,8 @@
> > #define SMI_FIFO_TH1 0x238
> > #define SMI_FIFO_TH2 0x23c
> > #define SMI_DCM 0x300
> > +#define SMI_COMMON_CLAMP_EN_SET 0x3c4
> > +#define SMI_COMMON_CLAMP_EN_CLR 0x3c8
> > #define SMI_DUMMY 0x444
> >
> > /* SMI LARB */
> > @@ -134,6 +140,7 @@ struct mtk_smi_larb_gen {
> > unsigned int larb_direct_to_common_mask;
> > unsigned int flags_general;
> > const u8 (*ostd)[SMI_LARB_PORT_NR_MAX];
> > + const u8 *clamp_port;
> > };
> >
> > struct mtk_smi {
> > @@ -150,6 +157,7 @@ struct mtk_smi {
> > };
> >
> > struct mtk_smi_larb { /* larb: local arbiter */
> > + struct device *dev;
> > struct mtk_smi smi;
> > void __iomem *base;
> > struct device *smi_common_dev; /* common
> > or
> > sub-common dev */
> > @@ -157,6 +165,10 @@ struct mtk_smi_larb { /* larb: local arbiter
> > */
> > int larbid;
> > u32 *mmu;
> > unsigned char *bank;
> > + struct regmap *smi_comm_syscon; /* smi-
> > comm
> > or sub-comm */
> > + u8 smi_comm_in_port_id; /* smi-
> > comm or sub-comm */
> > + struct notifier_block nb;
> > + struct reset_control *rst_con;
> > };
> >
> > static int
> > @@ -478,6 +490,19 @@ static const u8
> > mtk_smi_larb_mt8195_ostd[][SMI_LARB_PORT_NR_MAX] = {
> > [28] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,},
> > };
> >
> > +static const u8 mtk_smi_larb_clamp_port_mt8188[MTK_LARB_NR_MAX] =
> > {
> > + [9] = BIT(1), /* larb10 */
> > + [10] = BIT(2), /* larb11a */
> > + [11] = BIT(2), /* larb11b */
> > + [12] = BIT(3), /* larb11c */
> > + [13] = BIT(0), /* larb12 */
> > + [16] = BIT(1), /* larb15 */
> > + [17] = BIT(2), /* larb16a */
> > + [18] = BIT(2), /* larb16b */
> > + [19] = BIT(3), /* larb17a */
> > + [20] = BIT(3), /* larb17b */
> > +};
> > +
> > static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
> > .port_in_larb = {
> > LARB0_PORT_OFFSET, LARB1_PORT_OFFSET,
> > @@ -531,6 +556,7 @@ static const struct mtk_smi_larb_gen
> > mtk_smi_larb_mt8188 = {
> > .flags_general = MTK_SMI_FLAG_THRT_UPDATE |
> > MTK_SMI_FLAG_SW_FLAG |
> > MTK_SMI_FLAG_SLEEP_CTL |
> > MTK_SMI_FLAG_CFG_PORT_SEC_CTL,
> > .ostd = mtk_smi_larb_mt8188_ostd,
> > + .clamp_port = mtk_smi_larb_clamp_port_mt8188,
> > };
> >
> > static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
> > @@ -582,6 +608,45 @@ static void
> > mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)
> > writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
> > }
> >
> > +static int mtk_smi_larb_clamp_protect_enable(struct device *dev,
> > bool enable)
> > +{
> > + struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> > + u32 reg;
> > + int ret;
> > +
> > + /* smi_comm_syscon may be NULL if the subsys doesn't have bus
> > glitch issues */
> > + if (!larb->smi_comm_syscon)
> > + return -EINVAL;
> > +
> > + reg = enable ? SMI_COMMON_CLAMP_EN_SET :
> > SMI_COMMON_CLAMP_EN_CLR;
> > +
> > + ret = regmap_write(larb->smi_comm_syscon, reg, larb-
> > > smi_comm_in_port_id);
> >
> > + if (ret)
> > + dev_err(dev, "Unable to %s clamp for input port %d:
> > %d\n",
> > + enable ? "enable" : "disable",
> > + larb->smi_comm_in_port_id, ret);
> > +
> > + return ret;
> > +}
> > +
> > +static int mtk_smi_genpd_callback(struct notifier_block *nb,
> > + unsigned long flags, void *data)
> > +{
> > + struct mtk_smi_larb *larb = container_of(nb, struct
> > mtk_smi_larb, nb);
> > + struct device *dev = larb->dev;
> > +
> > + if (flags == GENPD_NOTIFY_PRE_ON || flags ==
> > GENPD_NOTIFY_PRE_OFF) {
> > + /* disable related SMI sub-common port */
> > + mtk_smi_larb_clamp_protect_enable(dev, true);
> > + } else if (flags == GENPD_NOTIFY_ON) {
> > + /* enable related SMI sub-common port */
> > + reset_control_reset(larb->rst_con);
> > + mtk_smi_larb_clamp_protect_enable(dev, false);
> > + }
> > +
> > + return NOTIFY_OK;
> > +}
> > +
> > static int mtk_smi_device_link_common(struct device *dev, struct
> > device **com_dev)
> > {
> > struct platform_device *smi_com_pdev;
> > @@ -638,6 +703,51 @@ static int mtk_smi_dts_clk_init(struct device
> > *dev, struct mtk_smi *smi,
> > return ret;
> > }
> >
> > +static int mtk_smi_larb_parse_clamp_optional(struct mtk_smi_larb
> > *larb)
> > +{
> > + struct device *dev = larb->dev;
> > + const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
> > + u32 larb_id;
> > + int ret;
> > +
> > + /*
> > + * Only SMI LARBs in camera, image and IPE subsys need to
> > + * apply clamp and reset operations, others can be skipped.
> > + */
> > + ret = of_property_read_u32(dev->of_node, "mediatek,larb-id",
> > &larb_id);
> > + if (ret || !larb_gen->clamp_port || !larb_gen-
> > > clamp_port[larb_id])
> >
> > + return 0;
> > +
> > + larb->smi_comm_in_port_id = larb_gen->clamp_port[larb_id];
> > + larb->smi_comm_syscon = syscon_regmap_lookup_by_phandle(dev-
> > > of_node,
> >
> > + "mediat
> > ek,smi");
> > + if (IS_ERR(larb->smi_comm_syscon)) {
> > + larb->smi_comm_syscon = NULL;
> > + return dev_err_probe(dev, -EINVAL,
> > + "Unknown clamp port for larb
> > %d\n", larb_id);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int mtk_smi_larb_parse_reset_optional(struct mtk_smi_larb
> > *larb)
> > +{
> > + struct device *dev = larb->dev;
> > + int ret;
> > +
> > + larb->rst_con = devm_reset_control_get_optional_exclusive(dev,
> > "larb");
> > + if (!larb->rst_con)
> > + return 0;
> > +
> > + larb->nb.notifier_call = mtk_smi_genpd_callback;
> > + ret = dev_pm_genpd_add_notifier(dev, &larb->nb);
> > + if (ret)
> > + return dev_err_probe(dev, -EINVAL,
> > + "Failed to add genpd callback
> > %d\n", ret);
> > +
> > + return 0;
> > +}
> > +
> > static int mtk_smi_larb_probe(struct platform_device *pdev)
> > {
> > struct mtk_smi_larb *larb;
> > @@ -648,6 +758,7 @@ static int mtk_smi_larb_probe(struct
> > platform_device *pdev)
> > if (!larb)
> > return -ENOMEM;
> >
> > + larb->dev = dev;
> > larb->larb_gen = of_device_get_match_data(dev);
> > larb->base = devm_platform_ioremap_resource(pdev, 0);
> > if (IS_ERR(larb->base))
> > @@ -664,6 +775,14 @@ static int mtk_smi_larb_probe(struct
> > platform_device *pdev)
> > if (ret < 0)
> > return ret;
> >
> > + ret = mtk_smi_larb_parse_clamp_optional(larb);
> > + if (ret)
> > + goto err_link_remove;
> > +
> > + ret = mtk_smi_larb_parse_reset_optional(larb);
> > + if (ret)
> > + goto err_link_remove;
>
>
> If we have "larb_gen->clamp_port[larb_id]", we must have the reset
> function, is this right? if yes,
>
> if (larb->smi_comm_syscon && larb_gen->clamp_port[larb_id]) {
> ret = mtk_smi_larb_parse_reset(larb); // Not optional.
> }
>
> and then we could remove the checking of larb->smi_comm_syscon in
> mtk_smi_larb_clamp_protect_enable, it will be simpler.
>
> Thanks.
>
Thanks for comments.
You are right. We can fix it like this. Just determine whether
clamp and reset are required in 'mtk_smi_larb_probe'. If we
have "larb_gen->clamp_port[larb_id]", then clamp and reset operations
are required. And the '_optional' suffix should be removed from the
function name in this case.
in mtk_smi_larb_probe:
...
if (larb->larb_gen->clamp_port && larb->larb_gen->clamp_port[larb-
>larbid]) {
ret = mtk_smi_larb_parse_clamp(larb, larb->larbid);
if (ret)
goto err_link_remove;
ret = mtk_smi_larb_parse_reset(larb);
if (ret)
goto err_link_remove;
}
...
Powered by blists - more mailing lists