linux-kernel - Re: [PATCH v11 4/4] arm64: dts: qcom: Add base HAMOA-IOT-EVK board

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <254d7d75-fa02-4bca-accf-4567b9dbf673@oss.qualcomm.com>
Date: Tue, 16 Sep 2025 12:19:39 +0800
From: Yijie Yang <yijie.yang@....qualcomm.com>
To: Stephan Gerhold <stephan.gerhold@...aro.org>
Cc: Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley
 <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v11 4/4] arm64: dts: qcom: Add base HAMOA-IOT-EVK board



On 2025-09-12 17:00, Stephan Gerhold wrote:
> On Wed, Sep 10, 2025 at 05:02:12PM +0800, Yijie Yang wrote:
>> The HAMOA-IOT-EVK is an evaluation platform for IoT products, composed of
>> the Hamoa IoT SoM and a carrier board. Together, they form a complete
>> embedded system capable of booting to UART.
>>
>> Make the following peripherals on the carrier board enabled:
>> - UART
>> - On-board regulators
>> - USB Type-C mux
>> - Pinctrl
>> - Embedded USB (EUSB) repeaters
>> - NVMe
>> - pmic-glink
>> - USB DisplayPorts
>> - Bluetooth
>> - WLAN
>> - Audio
>>
>> Written in collaboration with Quill Qi (Audio) <le.qi@....qualcomm.com>,
>> Jie Zhang (Graphics) <quic_jiezh@...cinc.com>, Shuai Zhang (Bluetooth)
>> <quic_shuaz@...cinc.com>, Yingying Tang (WLAN) <quic_yintang@...cinc.com>,
>> and Yongxing Mou (USB DisplayPorts) <quic_yongmou@...cinc.com>.
> 
> This looks like you should have Co-developed-by: tags together with
> their Signed-off-by: tags.

Same with 3/4.

> 
>>
>> Signed-off-by: Yijie Yang <yijie.yang@....qualcomm.com>
>> ---
>>   arch/arm64/boot/dts/qcom/Makefile          |    1 +
>>   arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 1221 ++++++++++++++++++++++++++++
>>   2 files changed, 1222 insertions(+)
>>
>> [...]
>> diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
>> new file mode 100644
>> index 000000000000..6eedad7e858a
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
>> @@ -0,0 +1,1221 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "hamoa-iot-som.dtsi"
>> +
>> +/ {
>> +	model = "Qualcomm Technologies, Inc. Hamoa IoT EVK";
>> +	compatible = "qcom,hamoa-iot-evk", "qcom,hamoa-iot-som", "qcom,x1e80100";
>> +	chassis-type = "embedded";
>> +
>> [...]
>> +	/*
>> +	 * TODO: These two regulators are actually part of the removable M.2
>> +	 * card and not the CRD mainboard. Need to describe this differently.
> 
> This is not a CRD, I think?

I will update.

> 
>> +	 * Functionally it works correctly, because all we need to do is to
>> +	 * turn on the actual 3.3V supply above.
>> +	 */
>> +	vreg_wcn_0p95: regulator-wcn-0p95 {
>> +		compatible = "regulator-fixed";
>> +
>> +		regulator-name = "VREG_WCN_0P95";
>> +		regulator-min-microvolt = <950000>;
>> +		regulator-max-microvolt = <950000>;
>> +
>> +		vin-supply = <&vreg_wcn_3p3>;
>> +	};
>> +
>> +	vreg_wcn_1p9: regulator-wcn-1p9 {
>> +		compatible = "regulator-fixed";
>> +
>> +		regulator-name = "VREG_WCN_1P9";
>> +		regulator-min-microvolt = <1900000>;
>> +		regulator-max-microvolt = <1900000>;
>> +
>> +		vin-supply = <&vreg_wcn_3p3>;
>> +	};
>> +
>> +	vreg_wcn_3p3: regulator-wcn-3p3 {
>> +		compatible = "regulator-fixed";
>> +
>> +		regulator-name = "VREG_WCN_3P3";
>> +		regulator-min-microvolt = <3300000>;
>> +		regulator-max-microvolt = <3300000>;
>> +
>> +		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
>> +		enable-active-high;
>> +
>> +		pinctrl-0 = <&wcn_sw_en>;
>> +		pinctrl-names = "default";
>> +
> 
> regulator-boot-on?
> 
>> +		regulator-always-on;
>> +	};
>> +
>> [...]
>> +};
>> +
>> [...]
>> +&mdss {
>> +	status = "okay";
>> +};
>> +
>> +&mdss_dp0 {
>> +	status = "okay";
>> +};
>> +
>> +&mdss_dp0_out {
>> +	data-lanes = <0 1>;
> 
> This is unneeded unless you really want to limit this to just 2 lanes.
> x1e80100.dtsi specifies 4 lanes by default.

Great reminder! I’ll rebase on top of the latest code.

> 
>> +	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
>> +};
>> +
>> +&mdss_dp1 {
>> +	status = "okay";
>> +};
>> +
>> +&mdss_dp1_out {
>> +	data-lanes = <0 1>;
> 
> Same here.
> 
>> +	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
>> +};
>> +
>> +&mdss_dp2 {
>> +	status = "okay";
>> +};
>> +
>> +&mdss_dp2_out {
>> +	data-lanes = <0 1>;
> 
> And here.
> 
>> +	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
>> +};
>> +
>> +&mdss_dp3 {
>> +	/delete-property/ #sound-dai-cells;
> 
> You need to define pinctrl for the HPD pin here.

Will do.

> 
> Thanks,
> Stephan

-- 
Best Regards,
Yijie