[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250917140933.2042689-2-quic_rdwivedi@quicinc.com>
Date: Wed, 17 Sep 2025 19:39:30 +0530
From: Ram Kumar Dwivedi <quic_rdwivedi@...cinc.com>
To: <alim.akhtar@...sung.com>, <avri.altman@....com>, <bvanassche@....org>,
<robh@...nel.org>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<mani@...nel.org>, <James.Bottomley@...senPartnership.com>,
<martin.petersen@...cle.com>
CC: <linux-scsi@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
Krzysztof
Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH V6 1/4] ufs: dt-bindings: Document gear and rate limit properties
Add optional "limit-hs-gear" and "limit-rate" properties to the
UFS controller common binding. These properties allow limiting
the maximum HS gear and rate.
This is useful in cases where the customer board may have signal
integrity, clock configuration or layout issues that prevent reliable
operation at higher gears. Such limitations are especially critical in
those platforms, where stability is prioritized over peak performance.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Signed-off-by: Ram Kumar Dwivedi <quic_rdwivedi@...cinc.com>
---
.../devicetree/bindings/ufs/ufs-common.yaml | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
index 31fe7f30ff5b..9f04f34d8c5a 100644
--- a/Documentation/devicetree/bindings/ufs/ufs-common.yaml
+++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
@@ -89,6 +89,22 @@ properties:
msi-parent: true
+ limit-hs-gear:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 6
+ default: 6
+ description:
+ Restricts the maximum HS gear used in both TX and RX directions.
+
+ limit-gear-rate:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [rate-a, rate-b]
+ default: rate-b
+ description:
+ Restricts the UFS controller to rate-a or rate-b for both TX and
+ RX directions.
+
dependencies:
freq-table-hz: [ clocks ]
operating-points-v2: [ clocks, clock-names ]
--
2.50.1
Powered by blists - more mailing lists